Microsoft Flight Simulator (2020/2024)

While flying I get a pop up that has this in the popup. Active Pause is enabled. MSFS active pause is enabled. Push OK when ready to resume tacking and then disable active pause. This popup starts repeating itself until it fills the display. I cannot stop it and I have to use TASK MANAGER to stop MSFS. I do not know how to stop this from happing. Adam Poincon

hey guys i am trying to install AIG manager OCI setup when doing so when i select a folder to be installed in , its states that package is not installed thanks Mike

Prior to SU1 I would get a CTD maybe 1 out of 30 flights. Now, post SU1 it crashes at the start of every flight. Even before I hit ready to fly. I even did a fresh install and have an empty community folder. Any thoughts?

https://forum.pmdg.com/forum/main-forum/general-discussion-news-and-announcements/345220-25jan25-a-bit-of-optimism-for-the-pending-msfs-2024-su1-update We have had the SU1 public beta on hand for a bit over a day now, and are cautiously optimistic that, come Monday, we will find ourselves fully un-stuck when it comes to working within MSFS 2024. Late this evening, we were able to build the 777 using the MSFS SDK, and it ran in mostly stable fashion, with debugging capability attached. We operated the airplane through an entire flight sequence and began cataloging the many issues that show up in 2024 that don't appear in 2020 and thus need to be addressed.…

What does it mean when I try to update my video driver and I see this.... https://imgur.com/a/D2VATY7

Was wondering if its on my pc after the last update. Before the last update i had 5 options being ATIS, Clearance,centre, ground and tower. But now i have only have 3 being ATIS, clearance and centre. Contacting atis is the same but now i have to pick centre to get my clearance which also tells me to taxi so missing the option to calling ground etc for push back. The only way round is to find the ground and clearance freq from the charts etc and enter them in than it normal as before. Same with entering the rwy have to find the freq from the charts.

It seems as though lately after updating my Nvidia driver, every so often in 2020 (not every flight) I get the following error and CTD. This has never happened before. I also noticed that i get very bad screen tearing that gets resolved if I turn HDR on and off again. I'm not sure if that is the actual fix but it seems to work. What could be the cause and what could be the fix? This is happening when loading FSLabs. I have not gotten this in 2024 with Fenix. When I don't get a crash, my system runs very well outside of the screen tearing I mentioned. My system specs are in my sig. Hoping someone can shed some light! 1) Your graphics card encountered a proble…

Not sure if anyone has been able to make it work but I'd like to know how, if it can be done.

Hi this sim or lack there of is just getting on my nerves day by! It finally updated to sim update version 1.3.23 today and I can't see many of the landing challenges which were there before such as Bilbao, Aurelia, Brisbane, Calgary Int --to name a few from the famous list. I have the premium deluxe version and they were all there before the update albeit quite buggy but now they aren't appearing in the list at all in the famous section anyone has noticed this or can help?

Question: I never manually installed SU1, I just shows 1.3.23 installed - is that correct. Anyway, I had 30 airports in community folder. The sim crashed when I attempted to start a flight at these airports. Previous versions had no issues. So I moved al my custom airports out of Community Folder. Many still reside in my Library from DRZ, LATINVFR, FEELThere, FSDT and all have a notice on them say under the enabled section MS2020 and also say Not Creator Approved. What does that mean? Do I disable them. am getting CTD all the time in the US where my airports are, but not in say Europe where I have no addon airports. What is causing these CTD???

I wonder if anyone can offer their thoughts with my latest conundrum. I recently bought the paid version of the PMS GTN750 with the idea of using it on a smaller Ipad which I have had hanging around for some time now. After installing Spacedesk and getting the Ipad to work across the desktop, I dragged the GTN750 across onto the Ipad, hoping that it would all work fine. Sadly, it doesn't! For some reason, although the unit cane be dragged across and it dispalys fine, for some reason the touch aspect doesn't work. If I drag the unit across to my secondary monitor, which is just a small 14" standard monitor which runs via HDMI, it works fine, it's not touchscreen, but I can…

My local airport KOSH is recently a disaster zone. Even main runway 36 has right angles on it's surface, so that the plane can barely land on it. Taxiways are way worse than that and most planes and ground equipment are elevated. Don't know if this is a beta thing or being sent from the server that way. Cleared out the shader cache files just to see if that would make a difference but, no joy. Looks like if one turns off photogrammetry, it flattens back out.

https://www.wideview.it This is for using multiple view pc’s in a network environment. Advantage : higher FPS than with multiple monitors connected to 1 pc.

Taking an approach into EGPH using the GTN750 is behaving in a way I can't quite make sense off. The best way I can explain is via the screenshots below but basically I've got a flight plan created in the unit from EGNC to EGPH but the origin airport doesn't really matter. Once I start putting in the arrival and approach at the bottom of the arrival it always places the airport itself BEFORE the approach, when I then add the approach the airport as a waypoint sits between the arrival and the approach. What then happens is when I reach the final waypoint of the arrival the plan will then turn the direction of the runway as the airport itself is a waypoint here. …

Anyone try this out? Would be great if this beastie was a worthy replica. Initial ratings are low in MP, but not many responding yet. On another site; one remarked that the sound set was pretty good. Also, is this available anywhere else?

..in 2024.. Mine has inop displays..

Hi, Really dumb question but on starting the a350 and being outside how on earth do i get into the flightdeck? I have been al round door 1l trying to find a hot spot but nothing I can open eng cowls and some panels but thats it I know its probably simple but so far its eluded me Thanks

Altough it is 4 years since MSFS2020 released, there are big airports that are still missing. For example LTFM İstanbul Airport which is a very big airport that should not be out of the list. This was not even in MSFS2020 and not in MSFS2024 now. Incredible !!!

I have been searching and trying options for days and wondering if anyone has figured out a way to 'hide' the cockpit. I simply want a full screen view out the front of the aircraft without the virtual cockpit. Having the HUD would be nice but not necessary. I have attempted to create custom cameras to achieve this but the zoom needs to be too high and the propeller is still visible. Thanks in advance for any suggestions!

I heard from someone on here that there's an issue with contrails in v2024. Just to report that that is not my experience: see screenshots below (link is to iCloud: not going to fanny around with Avsim's pre-industrial method for posting an inline image). https://share.icloud.com/photos/075rm1iiASdhQg0c3qyAIB-Bg

A couple of little short videos I threw together, teasing the convergence of sims, ...even before I had set things up properly.... what fun, ....what do you think ??? Works in FlightSim 2020 & 2024 This video shows an enhanced airport with many objects and good detail.....

As the server situation and streaming looks to be improving, what are everyone's thoughts on the weather improvements (or lack thereof) in 2024 vs 2020? Particularly clouds depiction, density, variety, storms and dangerous weather, mist/fog/haze, etc? From all the videos I see, the atmospheric lighting is certainly a jump up and especially the lighting in and around the clouds. And dare I say it, I see strong shades of pre-SU7 live weather (which I dearly miss) in 2024 live weather now?

Has anyone using 2024 noticed a slight stutter when departing runway 27 in the Asobo Atlanta. Regardless of settings it seems when I'm a quarter the way down the runway I hit a section that causes stutters, my FPS drops from 80+ to 30 and then jumps right back up. I've played with my settings and tried different aircraft. I'm starting to thing this is a Asobo issue. I've seen a few post about other Asosbo 2024 airports doing the same thing. Just curious if anyone here sees the same issue. If so I can stop chasing a fix and just live with it.

BeyondATC MSFS 2024 Compatibility Beyond ATC is fully compatible with MSFS 2024 in both the EA and Experimental versions. All ATC functions work as expected and for Supporters using the experimental build traffic control is fully functional. Being compatible means that it will work as it does in 2020, we have not yet been able to take advantage of any new features like Microsoft provided traffic models or test aircraft specific to the new simulator as they were not included in the development builds of the simulator, that will only be possible after the full MSFS 2024 release tomorrow. For traffic users, it should be noted that both FSLTL and AIG (and we …

Hi all, just now observed something that as soon as you see it, you cant unsee it anymore and it utterly annoys me: Do you see the dark/black outline around the AI planes? What kind of artefact is this? I do not have this in MSFS2020 and no, it is not related to the ambient occlusion setting, as it stays no matter what I put there (currently on ultra). Anyone knows how to get rid of this?