Microsoft Flight Simulator (2020/2024)

Does anyone experiencing when starting your flight, choosing a gate and when you click FLY your plane will spawn in Runway instead of the gate selected?

If Yer interested go get yer copy. That is all! EDIT: 4.61 GB -B

Just wanting to know all your user opt.cfg settings these days. i have, film grain=off Colour grading= off and sharpen =off TLOD 170 OLOD 140 I have also tried them on. but still ground textures don’t seem crisp. internet speed 110mbps Reshade on and also tried Nvidia filter. 2k Samsung monitor g5 hdr10 on and on monitor. dx11 mode. 7950x3d 6000mhz ddr 5 3080ti suprim x 16x in nvidia control panel. 🤷‍♂️ Any advise is appreciated . thank you Mike

I don't know if it's possible but I was wondering if there's an area on the cockpit screens that shows the trim marker on approach? I can't seem to see anything like the "green box" we use to enter the trim value before takeoff. It feels nice to have the aircraft trimmed perfectly on approach but there doesn't seem to be any visual reference, unless I'm not looking in the right place. It would be nice to be able to see the exact position. Thx in advance

Gamereactor Sweden had a brief chat with Jorg regarding the release of Nordic world update. Not sure how much I can quote from the article itself (in swedish, linked at the bottom) but some interesting tidbits: Jorg states that some "internal stats" are indicating that nine million players have flown the simulator, which is 4 times the number projected in their initial forecasts (doesn't say when and how these forecasts were conducted so take it with the usual grain of salt) Also, ground detail experience in FS2024 is aimed to rival that of Forza Horizon 5 according to Jorg: "I flew over a woodland area in FS2024 the other day and choose to land at a s…

Blacksquare did an amazing job on this aircraft but the default glass cockpit needed some love. The most incomplete of Asobo's offerings has now been addressed: King Air 350 G1000 Cockpit Mod for Microsoft Flight Simulator | MSFS Can't believe I missed this for other a month.

Just wondering if anyone knows - is it possible to achieve this? Assuming "Item_A" is normally set ON (i.e. active in Community folder), I would like to activate Item_01 and have it automatically remove Item_A. I've got a few things set up as conditional processing but I've always found that aspect a bit confusing and I don't want to risk upsetting what I've already got working. thanks in advance for any suggestions

This aircraft has me interested enough to purchase but I see that this is only available to purchase on Marketplace. Are there any plans to sell this anywhere else and if so in what sort of time frame? Or will it remain exclusively there?

Is there anyone having a problem loading the sim?😐 For some reason on my end the sim will not load up after the progress bar reaches the end. This just started 0200UTC 11/12/23.😟

Hello guys, I have decided to do some VFR flying within PNG with Kodiak. For other VFR flights i use Skydemon but just realized its not available withing PNG. is there something similar available for that area? If not what would be best place to make routes which i can have on iPad or within sim and also get some charts for IFR recoveries? Thanks in advance

I know it's been talked about before. Today, I flew EGLL-LPMA-EGLL and on return to EGLL, no traffic at the airport at all (I'm using FSLTL). People have said this is a sim objects issue, but this can't be true as there are aircraft attempting to land, but they just go around. There are no aircracft on the ground at all. There must be a solution to this...even FS9 managed to have AI traffic on return journeys. Is MSFS that backwards that it can't handle it?! Are they working on a solution?

Anyone else noticed some of the taxiways on DFW are like an obstacle course. It took almost full power to get the DC6 to climb over one of the "bumps"...I think the airport grounds keepers should have a look at this....😉

This may have slipped under the radar...the Alouette III was updated to v1.4 last week. She looks and flies better than ever. Good times today flying through some of the new Nordics update areas. Changelog Alouette III Version 1.4: NEW: Interior textures-Panel-Overhead Panel-Seats-Floor-Cabin NEW: Exterior textures Artouste engine fully retextured NEW: Highly detailed 3D model for the Astazou engine attachment NEW: Fully functionnal bambi bucket (see manual) NEW: Two more liveries added - ETI 2000 - Argentinian Armada NEW: Reworked sound package Fixed : You can now hear the turbine when opening the doors (while rotor is still not active) Fixed: Te…

I am trying to set up a departure point from a hold short position for any runway, instead of on the runway itself. I can click on the hold short position on the map and set up a custom departure, but that starts me out in the air. The altitude for this custom departure can be edited in the Nav Log to start me on the ground, but the speed apparently cannot. Does anybody know if I can start at the hold short point? Thanks, Rush

For ages now I've been unable to figure out how to assign a keyboard stroke to a wing view, the views which are accessible through the showcase. There are several, slightly different views above the wings and I would like to access one of them through a single press of a button on my Stream Deck. First I need to discover how to assign these views to a keyboard stroke, once I've done that it's then easy to assign that keystroke to the Stream Deck. Am I missing something? Surely there is an easy way to do this... if so, then for the life of me I've been unable to find it! Any help with this would be appreciated. Thanks guys.

Did anyone noticed that when FSHud window is opened or minimized in simulator, Adaptive Sync / GSync is not active? All integrated windows like GSX etc are working fine. My monitor (Coolermaster tempest gp27q) is working at 144Hz, and I lock my frames at 90. Monitors OSD reports 90Hz in simulator. As soon as I open FSHud window it locks at 140Hz ant start tearing and stuttering. I was going crazy for days why my GSync is not working. Until today when I started flight without FSHud and discovered this.

I have had this problem before, but ignored it as I thought it was probably a one off. I set up a flight this morning from ESSA to LTFE in my Fenix A320. Took the aircraft to cruising altitude and then left it. When I returned about 90 minutes later, MSFS 2020 was still displayed, although 'frozen' and the sound was still working. In the middle of the screen was an application error message which read. (Just to note, although I had armed TOD, I had not yet reached that point in the flight plan.) the instruction at 0x00007FFF9B3D7CAA referenced memory at 0xFFFFFFFFFFFFFFFF. The memory could not be read My only option was to close MSFS 2020, which I did. …

Anyone else without subscription to Navigraph noticed that in the Fenix you cannot access enroute maps ? e.g VFR, High Enroute, Low enroute etc... It used to be OK in previous versions. Now when you scan the QR to allow the access to Fenix its simply bumping back the QR code. The only option is to select "skip this continue to the default Fenix map. P.S In the PMDG there is no issue and you can view all enroute maps.

I have the MSFS audio settings set up the way everything sounds like the way as it should except for the one thing - the TDS GTNXi sounds are way too loud. Any way to lower the volume of those alerts? Which slider in MSFS audio settings controls GTNXi sounds?

Hi have this youtube channel bookmarked, mostly for the sake of his excellent P3D videos, but today saw this one and thought it might be interesting for my fellow MFS 2020 users: How to Improve your Visuals in MFS2020! My Nvidia Freestyle settings - YouTube

I've been flying with photogrammetry turned off for a few flights and just landed in Imaginesim Atlanta and noticed that the ramp had trees & bushes scattered in several places. Once I tuned PG back on the trees & bushes were gone. The Asobo Atlanta is not installed. I wish there was a Imaginesim forums to report the problem. Has anyone else seen this? This can bee seen on Ramps 1.3 and 6.

Hi All I have installed LJLJ Scenic routes airport into my community folder - have followed the instructions on the PDF (Not the best!) and am getting this which looks to be default scenery. Any ideas how to fix? I'm not aware that there is an LJLJ as default that needs to be disabled but happy to be proven wrong! Thanks Matt

I’m having an issue with my 737’s where I’ll set the plane on a final approach and anytime I pull up it makes the stall speed very high. I have the flaps at 30 degrees and it still wants to stall at 160 knots. It’s dropping a little fast as well. Do you know how to fix this? It also happens when I pull back a little to gain altitude and the stall speed will spike up to the airspeed that I was just at. The wings on final will flex like the plane is dropping fast. Keep in mind the plane is lightly loaded and not fully loaded.

TDS GTN 750 is now working alongside the Working Title GNS 430/530 on aircraft such as C310 and Analogue KA350. Version 1.0.2.1 released 04.12.2022Bug Fix: Resolved all compatibility issues with Working Title GNS 530/430: touchscreen capability and autopilot/variable functionality for these aircraftBlack Square KingAirBlackSquare CaravanMilviz C310Carenado PC12OrbX PAC750JustFlight Piper ArrowJustFlight Piper Turbo Arrow IIIJustFlight Piper Turbo Arrow IVJustFlight Piper Warrior IIImportant Note: Requires Version 1.0.3 of the Working Title GNS 530/430 which can be updated from within MSFS/Community Manager/MarketplaceWe would like to thank the Working Title team for …

Anyone using this what's your opinion, worth it? No cons? Thanks in advance. https://flightsim.to/file/28286/unknown-s-runway-lights