Microsoft Flight Simulator (2020/2024)

Asobo sure has the art of making Haze everywhere, down pat. 🤬

After SU7 my Salty B748 doesnt engage APP or LOC auto mode.- No problem with the default B748.- Is there a fix ? Thanks

It appears that Asobo's testing process for each sim update is very reminiscent of the pre-launch testing of the Hubble Space Telescope (HST). If you'll recall, the HST was launched back in 1990 after years of development by brilliant men and women of science. Each individual part of the telescope was meticulously designed and built -- and tested and re-tested before launch. Then, after the HST was placed in orbit by the Space Shuttle Discovery, astronomers were dismayed to see that the images transmitted to the ground by Hubble were a disheartening blur. After laborious analysis, it was determined that the 94" main mirror aboard the telescope had been ground to the wrong…

Purchased a licence code from the Microsoft store, in readiness for a new PC. Due to parts shortages it's been a month now since the PC order My old PC will "possibly" just run MSFS if I turn all the settings down,( Ge force 680, intel i7 3770k overclocked to 4.2, 16Gb ram) is there any issues if I install it on here or will that cause hassle moving it to the new pc when that arrives? New PC will be Intel Core i7 12700K 12 Core Geforce RTX 3070ti 32GB Standard DDR5 4800M Samsung 2TB 970 EVO Plus Is it likely to run well on this? Cheers

Yesterday my new airport for MS Flight Simulator went online: EDDN Airport Nuremberg. For everybody who don’t know this place a short introduction: EDDN "Albrecht Dürer" Airport is the international airport of the city of Nuremberg and the second largest airport in Bavaria. Several airlines operate to and from this airport to domestic German and European destinations. Intercontinental long-haul flights are also offered. Among other things, the airport has a modern glassed-in terminal, an architecturally eye-catching tower, numerous hangars and a large air cargo area. With a length of 2700 m and a width of 45 m, even wide-bodied aircraft such as the B747 can l…

Terrible flight today. When taking off from Amsterdam the ac immediately banked to the left and I almost crashed. Cruising altitude was 33000 ft. The ac starts to descent by itself as TAT is +239 Celsius and speed 95 knots …. Also the connection with Bing was lost one time. Asobo fix this ! And the framerate drop over time !

Hi guys, I searched the forum and found nothing, I also asked in discord of the app and no one has given a solution, my question is the following, Anyone who uses this app and has changed computers, how can I keep all my progress? When installing on the new pc, the progress does not appear, I am convinced that it is in a folder on the previous pc, but I have no idea what it may be, Thanks for all the help you give in this forum.

I am trying to get my AIG completely up and running and have a question. How does the Traffic get injected into the sim? I've installed my liveries and confirmed that was successful and load Traffic Controller before loading the sim. Yesterday I did a flight from KSTL (the payware version that is in the Marketplace) to ORD (FSDT). I load the sim and start at the gate and there are 0 planes at STL. I thought that was odd. I decided to take off and I pulled up Traffic controller and it was just a black screen (i have seen this before but it eventually loads). I checked back later and it seemed to be running fine so I looked at the map and there were a lot of planes f…

So, I made the decision to fully migrate into Win 11, mostly because of the very Linux-friendly this new Windowze system appears to be ... I made a fresh install of Win 11, applied all updates, pushed MFS and went testing... .) All aircraft ( default and the FI Spitfire ) cause CTD as soon as I load a flight ( at LPPT , Live Weather ) and start my takeoff run. The sim crashes instantly... .) Weather, although correct METAR is displayed for the airport and shows "LPPT 040830Z 24007KT 9999 FEW002 BKN010 13/13 Q1027 ", shows no clouds and just a LOT of HAZE .... .) I decided to switch to DX12 Beta and, I was able to start a flight and actually continue wi…

At least in SDR. And we have to wait until Feb 2022 to have it fixed 😞 (hopefully!)

Leave this here it’s good to have options.

= a great combination. FTSiM sound here: https://www.ftsimplus.com/cessna-longitude.html

Has anyone else noticed that when selecting/clicking on a gate 'spot' (not from the drop-down list) from the world menu, the sim CTDs when trying to load? Also, just had a CTD when in the drone cam and moving up fairly high then hitting the reset (num pad 5), the sim hangs, then CTDs. I'll log these if no one else has already.

Just reached cruise alt (31,000) when I lost power to both engines, I had updated to DEV version 8dc5bc7 before the flight, anyone else experienced this?

Stream Deck some may know of this but had to share I have a 15 button version on its way - 32 is a bit to expensive imo and this Flightdeck software has 15 button profiles also Picked one up new on EABY for $116.00 plus $10 for shipping - used ones are not much less so it was an obvious choice - Amazon running about the same price sometimes mostly more money 15 button version is just a few more button pushes no big deal - this is going to make things a lot easier no more fiddling around - cant wait till it shows up I installed the software for the Stream Deck and bought fligthdeck plugin - all appears to be working just need actual unit - very cool - t…

I bought the Hawk last night. I want to ask about takeoff trim! Taking of was like lifting a brick of the ground, it was so nose heavy. I went round and landed and was trimming to land ofc. Left Trim as it was when I landed. Then did another takeoff with the trim left as I landed and it was butter smooth takeoff. I have just watch 3 vids and read the manual again and see nothing about setting takeoff trim. I cannot even see a trim gauge for trimming only rudder and Aileron. Enlighten me please!

Hey guys I have a problem. I have the cs 777 and there are no gpws callouts (50,40,30,20,10). I really need this because without it I have horrible landings. Any suggestions?

How do you get rid of flight instruments showing in outside camera view ?

My FPS went down from 100 to 99 in the menus ?!!

I fly CJ4 with the Working Title mod v.0.12.10, MSFS with latest World Update. During two flights today I had complete engine failures, at somewhere over FL 210 suddenly a yellow error message appears on the MFD, and disappears so that I didn't know at first what happended. Maybe missed something on the checklist ? So I switched to DEV-mode and used the new Record function. Made a new flight just in one direction and climbed. Start direct from runway so that the plane was configured to takeoff. And this happended: Climb with FLC to FL 150: no problems. Climb to FL 300, at FL 236: Error Message on MFD: NG HIGH Then ITT climbs to Top: Error M…

How do I get a reverse version of the Thrustmaster TCA Quadrant Airbus? The flight simulator is FS2020 and it is an A32NX DEV aircraft modeling.

I did a complete re-install of MSFS and now my mouse won't move around the screen pressing the right mouse button like it use to. Does anyone have any idea what command I need to bind to the right mouse button. Thanks!

After SU6 when I am in the showcase camera modes and hit the "End" key I cycle thru 3 cameras (there used to be just 2) - 1 of them appears to be a POI camera that changes as I fly. Is there anyway to turn that off so its just the drone camera the external cameras? The settings descriptions are just horrible and keeping the labeling consistent and easy to understand.

Since the Dec 2 update MSFS starts in full screen mode and it does not respond to mouse clicks in the top bar. How do I switch it to windowed mode? I have the MS Store version running on a PC.

Their last update on their website was on October 8, with the next update scheduled for October 22. They had been quite regular with their updates and feature reviews since they came out, so I'm hoping that the radio silence for more than the past month is because they are busy working on the product. I'm not on their Discord forum, so don't know if they have posted any information there. Here's hoping they are still moving forward with their product. Regards, Rush