Microsoft Flight Simulator (2020/2024)

Posledních pár dní pozoruji, že mám problém s načítáním terénu. Načítání je pomalé, i pod rovinou vidím rozmazané textury a až po delší době se zaostří, v rozostřeném místě někdy chybí i budovy a stromy. Rozmazaný terén je vidět jako čtverec, někde je zaostřený a někde ne. Je vidět, že jde o problém s načítáním podkladové mapy BING. Doposud jsem tento problém neměl a textury terénu jsem vždy jasně viděl v různých výškách. Všiml jsem si toho kolem poslední aktualizace. Zkoušel jsem smazat vše v komunitní složce a nastavit hru na nejvyšší možnou grafiku a vypnout multiplayer, ale problém to nevyřešilo, takže to není problém s mým výkonem. Mám slušné internetové připojení s …

At 1st I thought it was somehow strobe lights leaking into the cockpit, but this seems to happen no matter which camera, whether external or internal. But I randomly see brief flashes of white intermittently. It doesn't happen often, but enough to notice and make it extremely annoying. I never seen this before and I'm not sure what could be causing it. Recently I updated to the latest DLS FG v0.90 mod from nexus. But don't think that could be the cause of it. Anyone else have similar issues like this?

Hello, I'm currently using the Bonanza Turbo V4-1SU6 mod. It is running great, but I noticed a big difference between the digital and analogue airspeed gauges. As you can see in the picture below, the digital reads about 170 kts while the analogue reads about 130 knots. When I run without the mod, they both read the same. I know this mod is no longer supported (and I am not requesting this), but wonder if anyone else has this and found a work around...

I just purchased BGSF by MK Studios and noticed blocky textures within the scenery. See here https://imgur.com/TKFIjHr This isn't something I've seen since P3D...can anyone help? Seems like a very poor recreation of the airport if these textures are like this.

IRL I now train for microlight license on the Comco 42, is nobody developing this much used microlight for MSFS? I know there is an Xplane 11 version, but I cannot go from MSFS to Xplane11 ... that is terrible.

Especially the analog ones, not the glass, and below USD40 😁. I feel like flying over West Papua and New Guinea. Thank you beforehand. Papua Bush Pilots

Hey guys , I’m wanting some help please with regards to my jetway not moving. I am currently at gate 6 and I I am trying to attach the jetway to the aircraft , but to no avail. And i have also disabled default jetways via the app. i am using gsx pro. thank you

I’ve used the Nvidia Performance overlay for darn near forever. It has a detailed version and a basic. I use basic. It reports performance by showing the FPS (peak) and also the AVG FPS. That performance difference is equated as Latency. Prior to SU 15 often while FPS might show 100 my AVG FPS might show 60 or less and my latency would be quite high. Now in SU 15 Beta and especially since the last update that same scenario will now show 100 FPS, 95 AVG FPS and very low latency, which for me is easily seen as an increase in overall smoothness, especially in panning. I am using Frame Generation which also seems to benefit from SU 15 Beta Anyone Else? -…

Hi, everybody, I'm having very difficult handling with the Cessna 172 on the ground after the SU15 Beta (every SU15 update, not just the last one). It happens especially in the turns. The aircraft tilts a lot, even at low speed on the taxiway or runway. It leans so much that she eventually tips over! I have tried to adjust the sensitivity of the controls, but the problem remains the same. Does this happen to anyone else? Thanks in advance and regards.

My local airport Edinburgh has just been released. My first airport from Pyreegue Dev Co. and really impressed with what they have delivered. Even better than the original Orbx release for XP11. Superb detailing.

Hi, I have two questions regarding this relatively old product. as I haven't found answers anywhere. 1. Does it have static AI included? Hope it does not. 2. Did they model new AAL terminal that replaced old AAL maintenance hangar? TIA.

Can you help with the option TRAVEL TO and APPROACH? the first complaint would be that, for example, on mobile phones RFS has the option CLOSE APPROACH or something like that and the plane spawns directly in front of the runway and is ready for landing The second thing I figured out, the autopilot is turned on, approach mode ON, and of course it takes 10-15 minutes for the plane to reach the runway from (I assume) the last navigation point of Laganini, and then the plane is at the wrong angle for landing on the runway, how can I explain , it is not in the plane of the runway, i.e. it does not close an angle of 0' in relation to the runway, but goes towards literally …

I have recently purchased this scenery, and I noticed that I get a "Terrain, Terrain, Pull Up" warning both on take off from runway 09, and also on final approach. Is this normal for this airport? I have checked out a handful of approaches to runway 09 on YouTube, but I have not heard any warnings of this kind. On a side note, I appreciate that the clue may be in the name as far as Greenland is concerned, but is it actually as dark green as the landscape appears to be in MSFS? I have also noted that the vector data for some of the lakes and other water features in this area seems to be quite low resolution (including a section of the fjord directly below the runway 0…

I have watched a number of videos re the newly launched TDS GTNXiPro with Navigraph database and charts. Those that I have watched 'show off' the features of this software. On the back of these, I bought and downloaded the software - and I am now totally confused, as to how I get it up and running, and in which aircraft I can use it. I have looked at the manual - but to be honest, that is not helping me. I have yet to find a video which shows how to launch/install it, so the software is currently sitting dormant. I would appreciate any help to get this up and running - and if there is a setup tutorial out there re the installation and launching - would welcome a link…

Since very recently I have some problems with FSLTL. If I load into an airport (e.g. KDEN) the airport is nicely populated. During approach to the same airport, I see enough other air traffic, but then, during landing at that airport it becomes completely empty. No a/c at all. Neither FSLTL Reset AI Traffic nor closing and restarting the FSLTL injector are helpful. Only when I quit to the main menu and go back to KDEN again, restarting FSLTL injector everything went back to normal. The problem is not only at KDEN, it happened at two other airports too. One of them was Paris Orly the other I can't remember. Unfortunately, I have no idea what's going on. Never had any …

Since those old liveries are not longer removable via Fenix app, I'm just curious if it's ok to get rid of them by simply deleting them? Anyone has better option? Thanks

Alexey put it online, it's open for download for old customers. https://beautifulmodelworld.com/bilbao-airport-lebb/

If I can recall correctly back in FSX or P3D days, there was a way to get your desired 3rd party apps/utils to load up when launching the main sim. For example, in MSFS I have AIFLOW, AIGROUND, FSLTL Traffic Injector and MSFS2020_AutoFPS and I would like to get them to all load automatically when launching the sim. I am using MFSF Addons Linker to launch my sim. What would be the best solution to set this up?

Hi, Flight : KMRY to KOAK via SJC First, I know I must ask for flight transition thru San Jose airspace, I can always bypass San Jose, but it really takes me out of the way. My question is for Oakland airspace. Since I want to land in Oakland, do I still have to ask for transition or do I simply advise about my plan to land. And can they refuse me access to the airport. Ron

I get the message below in PDMG Operations Center v2.0.1.2182 for several days now. Can I do something about that? "I was unable to reach PMDG's server. Certain features are disabled. Please check your connection, then restart the app to try again." Obviously, I am online. Paul

Hey all, Quick piece of advice before I commit to something I really really do not want to! I updated the Fenix and then started the sim and was greeted by that wonderful splash screen "Mandatory Update" Showing me a full 688 gig install...my answer to that was a hard nope! So I reset my pc and tried again, and up it popped again. Going back a year or two I remember someone telling all was not lost in this situation and you did not need to actually do the update, could anyone remind me what I can do to get around this? Happy to try anything but really do not want to have a ten hour ordeal of a download! I await patiently for a hero! Go!

Does anyone know exactly what this setting in the useropt.cfg file is suppose to do? It's currently at 1 and I tried changing it to 0 and see no difference. I'm not sure where to look exactly.

Dear All, I'm currently unable to load the MSFS KLAX. It just hangs at the end of the loading screen. May I ask if anyone else has encountered this issue and if so, how did you fix it? Best regards, Peter

Hi, is anyone else having issues logging in to MSFS this morning? I can't even log into the MSFS forum, without an error 500, and my sim won't connect to the cloud (and the xbox app in Windows just gives a blank screen when trying to log that back in). I've changed my password just in case that was the issue but to no avail. Ian.

Anyone knows why Fenix A320 has no cargo temp indication on ecam ? This is how it looks: https://ibb.co/b2G3njP But there is this panel (which seems Fenix couldent make up if its vent or heat so they put both🙂 ) https://ibb.co/cFMyRNg Any pilots or someone who familiar with Airbus knows the answer ?