RXP GTN 750/650 Touch

I use NpCV2.2 to enter settings using my keyboard. Unfortunately the Alabeo Aztec does not accept instructions for its Box 2 Com or Nav. Al suggested using a second pop up as box 2 which seemed a good idea but i find that they are still linked and I can't overcome the problem this way. Is that correct Jean-Luc? The map can be different but the other data can't be independent in the two two popups.

So, back in spring after downloading and installing Prepar3d v4.5 I was plagued by CTDs every time I would fly with A2A Bonanza using GTN 750. In frusteration I did a complete rebuild of Windows 10 and reinstalled everything. It is very disappointing because I never had CTD using the same apps in FSX-SE. I am going to give as much information as I can and I am going to try to resolve it without going nuclear this time. After rebuilding Windows 10 I had good success with GTN. No CTDs. I kept postponing updates but one day, August 6th MS caught me tired and unawares. and again on the 14th but I caught that one in time to roll it back. I since learned how to go into control …

Thought I would give the Milviz Baron 55 a go in P3DV5 as the C310 is not available yet. I installed everything and did the F1 replacement (GTN 750 + GTN650) and both gauges fires up nicely in the VC and in the pop-up windows. There is one problem though. The HSI and autopilot (GPS Mode) seems to be linked to the 650_2 gauge and not the 750_1 gauge as It does in all the other RXP implementations I have running in P3D. I looked at the ini and cfg files but can not find anything that solves the problem. Any solutions from the experts out there? My configuration files attached. panel.cfg Spoiler [Window Titles] Win…

Hello, I recently did a reload of FSX SE and had a heck of a time setting up my GTN-650. I finally got it to recognize my key and I have a menu in FSX. The problem is that when I go to set up the aircraft, two things happen: 1) the screen resolution changes to 1024. 2) The nav radio does not show in the menu. It stays stuck at set up aircraft. I have access to it through the view menu and it works, but I am faced with trying to fly with the panel in my face. I have changed the resolution in FSX and it stays on 1920 x 1080, but when flying with the GTN, all three screens are stuck in 1024 x 768. The resolution changes whenever I access the GTN. I have a GTX 1080 Ti video c…

I recently purchased both the 750 and the 650 and am using them in P3D v5 - love them... but I was wondering how I can get them to crossfill when using both of the modules in the same aircraft. I've tried running the garmin trainer again, but the button in the settings area of both is dithered. I have a feeling that I'm missing something simple, but I can't get it to work. I fly GA mostly, so it's not really the end of the world if I have to enter my flight plan twice but it would be nice to have this functioning. Thanks in advance,

Hi: Is your GTN750/650 product compatible/usable/intergraded in the PMDG DC-6? Thanks.

Hello, good afternoon I have all the RXP products and they are fantastic but I have come to ask for help because the only way that the GTN7xx and GTN6xx are going well is by giving no bezel in the replacement of the gauges but doing that eliminates the functionality of the buttons of the GTN is there no way to make it look the same but work the GTN buttons?

Hi team anyone knows how to enable a repeat of pushing joystick button or sending keyboard shortcut to action the "press and hold" function of the home button? I switched over to the reality-XP GTN from F1 due to the much easier and reliable keyboard and joystick configuration options. Only issue I have is that the Menu button 'Press and Hold' function only works when using the mouse on the screen. I have a dedicated touchscreen unit for the GTN750 so I am using it without the bezel. I have tried using a keyboard shortcut mapped in the INI file and a joystick button mapped to GPS Menu button in FSUIPC (with repeat) but to no avail. The configuration …

I thought I would throw my 2 cents into this discussion which will hopefully help some people out because I think I encountered most every problem there could be based upon many other threads on the internet. The Situation: I have installed X plane 11.55 on my system. I had not used it in a while so I had an older version of the GTN 750 on my system. When I booted up X plane, my GTN 750 got stuck with the message "Rebooting" that never went away. Using a previous version on my machine of the "rpnGTN-XPL-Setup file I tried to reinstall that software. I was advised that there was an upgrade and chose to install it. That did nothing to fix my problem. I then tried to re…

Hi is it possible to install the rxp gtn into the Cessna 441 using the rxp configurator, do I have to have the F1 installed to do this, just installed the 441 fly’s really smooth in vr. thanks,jim

Hello, (I'm bad at computers but I do my best.) I read: "There are different ways to check for software updates" For example this: :"subscribe directly to our RSS feeds. The hub for all feeds is linked to this page (see notes below / RSS mark in your browser URL bar). It is also available at this URL: http://www.reality-xp.com/appcast/rxp-software-updates.xml " RXP (Jean Luc) sent me: (Avsim 24 june) Feed for the GTN (FltSim): http://reality-xp.com/appcast/rxpGTN-FS.xml My question: PRACTICALLY how do I install this set of files so that the updates to my GTN 750 are done automatically. ? Thanks for your help Roland

Today I have been unsuccessful in attempts to enter the setup menu (Alt + Right Click). This in FSX SE. When I attempt to do so FSX SE halts into a black screen with only a title bar (see below). I am unable to access FSX SE menu bar, or to close FSX SE or minimize it. The sim icon is no longer showing in the taskbar. In Task Manager it is not showing in running applications. It is running as a process which from that location I am able to close it. This is happening with both the GTN and GNS gauges. I do not believe it is related to the most recent updates because I found the issue as I was attempting to access the update function in setup for the GTN. i.e. I wa…

Hi RXP. I have a problem with the Reality XP GTN 750. When I load a flight plan and then activate it, the GPS turns to a heading at 90 degrees to the heading it should be on. For instance if the heading is 090 degrees, the plane will go to a heading of 360 degrees. I have the CDI set to GPS. This problem occurs to all my aircraft (mostly Carenado) in which I have installed the unit. In one aircraft, I remove the GTN and did a flight with the Carenado Garmin 530 and the aircraft followed the flight flan flawlessly. I have uninstalled the program and removed all instances I could find of Reality XP in Program Data, App Data/Local, App Data/Roaming and Documents f…

Am looking to replace the old Flight 1 GTN's, specifically in A2a a/c and the Milviz PC6 Porter. Now, the A2A's come with an installer option to use the RXP gauges, but Milviz don't for the PC6. Question - is it possible to replace the Flight1 GTN with the RXP one in the PC6?

Hello For example castle, water dam, sea lighthouse etc On my GTN what is the procedure to locate the point on the map and give it a name? NB: the latitude and longitude of the point are known. Thanks

The title pretty much explains what I'm experiencing, the download server for the updates is not responding?

I found the RXP GTN.ini because I want to adjust the VC screen backlighting on a couple of aircraft. However, the entries I saw posted in the discussion are not there. Actually, there isn't a whole lot of data there. Must entries be manually added in notepad? Thanks

In the manual it tells us to copy and rename the sim folder found in ""C:\Program Files (x86)\Garmin\GTN Trainer\GTN\sys\" ; however, this path does not exist in the installation from the .exe from F1. When I go into the Garmin folder, the only folder available is a "trainers" folder and in it contains a launcher and packages folder, but no sim folder. It would be really helpful if I could get the dual installation.

Ever since I allowed a Garmin GTN Trainer update last month I have been having various troubles. The avionics on my A2A aircraft malfunctioned and the recent global update wasn't working. Got around that one. The GTN panels in other aircraft disappeared. Today, the GTN 750 in my A2A Bonanza and my C421 Golden Eagle quit working, screen would not come on. RXP Panel Assistant quit working for both GTN and GNS series. I attempted reinstall. No good. I attempted restore point to the day the GTN trainer update downloaded. No good. I uninstalled and reinstalled Garmin Trainers. No good. I tried a Lite reinstall of windows 10. Wouldn't do …

Can anyone tell me the latest P3D v4.5 stable GTN Trainer please? Or tell me any stable trainer version? I have 6.64.2 and according to my event viewer it has been the cause of CTDs in my recent P3D 4.5 setup. Thanks

If I download an earlier trainer version will it over right the version installed and will my RXP Gauges automatically link to it? Thanks

Hello, good afternoon, I write because I bought the F1 GTN 750 and when trying to activate the gauge in the DO228 fairing, the GTN frames come out inside what is gtn that is in the cabin, I put a link with the photo please help

Hello, The first time I got this message I clicked on "Download update" and it loaded the file "rxpGTN.FS.zip" in the Windows System32 folder. Now each time my pc is launched for the first time, the window "A new version of RealityXP Garmin GTN (FltSim) is available!" is displayed. A message says that this update already exists so I close the window. If I click on "Skip this version" the window also closes. Why is this message recurring? I found the "rxpGTN.FS.zip" folder in Wibdows - System32. Should we unzip it where is? Is there anything else to do? Thanks for your help.

Hello, I don't understand very well the procedure to buy the GTN750 from RXP. Do I have to go through F1? Could someone explain me how to do it? Thank you for your help Roland_Rcvau

Hello! 12 June I've updated my RXP GTN750 ([11JUN21] RXP GTN 750/650 Touch FltSim v2.5.28.3 Released!). But there is still no option "Selected ALT Range Arc" ("Green Banana") in RXP itself. But this option presents in a Garmin Trainer v 6.70. Please, when do you integrate it to this perfect RXP software? Thank you! (screenshots attached)