The RealSimGear Device Interface detects the hardware and shows button activity and commands such as:

GPS DIRECTTO BUTTON
GPS CURSOR BUTTON

So the hardware is being seen.

In Reality XP, Use Simulator GPS Commands is enabled.

If I assign the Direct-To function to a keyboard key in P3D, the Reality XP GTN responds correctly.

But when I press the Direct-To button on the RealSimGear hardware, Reality XP does not respond, even though the Device Interface shows the button press and command.

I also tested the RealSimGear hardware against a default P3D GPS, and the hardware button works there.

So the problem appears to be that the RealSimGear hardware commands are not controlling the Reality XP GTN, even though:

the hardware is detected
the Device Interface is seeing the button presses
and the same function works from a P3D keyboard assignment

Has anyone run into this with RealSimGear + Reality XP in P3D v4?

[GTN]
; comma separated list of gauges
gauges = GTN_750_1

[GTN_750_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = true 
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
; connects to: 'PFC_GTN' or any '#PID' (#D067 for PFC_GTN)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
LinkCrs = true 

[GTN_750_1.WINDOW]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 5120,2337,600,777
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true 
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,395,415,395
; display as popout window if true (requires XP11.1).
undocked = true 
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GTN_750_1.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true



What do I need to change to remove the bezel and have the screen fill the 750 screen of my hardware? Thanks in advance for any and all help.

Nathan

Thank you 

2. Is there a way to update the cycle? Any help would be greatly appreciated.

I wanted to ask if its possible to use the RealityXp GTN 750 with any aircraft / addon as some kind of pop-up. I do have the Virtualcol a220 for 

p3d  and saw theres an intigration, but what about other addons?

Speaking about the An 124 by FSS...

Best Regards,

Roberto Alvarez

The response status code does not indicate success: 404 (Not Found).

In my P3D we can see an OLD RXP database. Please, help!

When loaded and turnedon, the screen looks like zoomed, so i can not use the buttongs near the corner except by using a pop up window.

https://ibb.co/WkygPVV

Hoe can i  correct this one?

Thanks,

Raphael

Then i unninstal RXP and install again but same things, any solution please ?

LOG rxpGtnSim.dll:

23/07/22 11:23:40.611 03636 -    ] # rxpGtnSim64.dll version 2.6.0.0
23/07/22 11:23:40.609 03636 INFO ]
23/07/22 11:23:43.733 03636 INFO ] using: C:\Prepar3D v5\SimObjects\Airplanes\FLYSIM Learjet 35A\chklist.ace
23/07/22 11:23:43.830 16556 INFO ] GTN 750.1 - TRAINER 6624
23/07/22 11:23:43.837 16556 WARN ] GTN 750.1 process is running as-admin
23/07/22 11:24:10.267 16556 INFO ] GTN 750.1 - TRAINER 6624
23/07/22 11:24:10.280 16556 WARN ] GTN 750.1 process is running as-admin

LOG rxpGTN_menu.dll

23/03/21 22:55:56.447 14356 -    ] # rxpGTN_menu.dll version 2.5.30.0
23/03/21 22:55:56.457 14356 INFO ] edit panel: C:\Prepar3D v5\SimObjects\Airplanes\Carenado B350i_King_Air\panel\panel.cfg

LOG rxpGTN.gau

23/07/22 11:23:37.588 03636 -    ] # rxpGTN.dll version 2.7.1.0
23/07/22 11:23:37.588 03636 INFO ]

After updating P3DV4.5  RealityXP GTN750 to Garmin Aviation Trainers v3.8.2 the
GTN seems to work in P3D and the Garmin data base is updated to October, 2023
which is all great. My only worry is that when I try to launch the Garmin Trainer I get
a crash of KERNELBASE.DLL .  It is reproducible.

I have never found a use for the trainer but I am concerned that there is a flaw in my
installation which will show up and bite me later.

So I would like to fix this. The install showed no glitches and my control panel says:

Programs and Features
RealityXp Garmin GTN (Fltsim) Installed 9/12/2024 v2.7
Garmin GTN Trainer Installed 1/27/2024 327MB v 6.62.4.0
Garmin Aviation Trainers Installed 4.47GB 9/12/2024 v3.8.2

This is fully updated Windows 7.

Thanks for your help.

Steve Paradis

I have never found a use for the trainer but I am concerned that there is a flaw in my installation which will show up and bite me later.

So I would like to fix this. The install showed no glitches and my control panel says:

Programs and Features
RealityXp Garmin GTN (Fltsim) Installed 9/12/2024 v2.7
Garmin GTN Trainer Installed 1/27/2024 327MB v 6.62.4.0
Garmin Aviation Trainers Installed 4.47GB 9/12/2024 v3.8.2

This is fully updated Windows 7.

Thanks for your help.

Steve Paradis

After a fair amount of work got a 530 working in a RealAir Legacy.

Installed the Gtn and of course failed with the TDS MSFS trainer present.

Rest of install seemed to go ok and in FSX/P3D the module requires activation during startup of those sims.

Can select the GNS in RealAir/A2A planes after adding '1's to various config.ini files.

Cannot do same with the GTn series. No sign of them.

Read the manual about dual install but it assumes RXP is latest trainer when clearly the TDS pro setup with latest navdata from Navigraph is way more modern.

A lot of info about removing/moving other trainers in manual but I;m not doing that.

Can I point the RXP to use TDS trainer or have I basically wasted my money on the Gtns?

Open the file ”My Documents\Reality XP\GTN Simulation\FltSim\RealityXP.GTN.ini”

NO such ini files exist. Everything else seems present in the directories. I guess it copies this default file to addon planes as it has worked with the GNS that way.

Been reading thru forums someone said the dual install worked ok now but maybe they installed the RXP first?

I'm a tech guy but RETIRED so really don't want to do a lot of windows registry work with this product. Plug and play or throw away is my feeling right now. Just want to fly like I used to when everything was detected in the old days.

Absolutely do not want to mess with the fantastic TDS product in MSFS. 

Any help or links appreciated, a word from the dev would help btw it's been too quiet.

And this one:

On 10/23/2021 at 7:09 PM, RXP said:

Beginning with Cycle 1810 (effective September 13, 2018):

Garmin will begin restricting the number of airports included in the Worldwide Navigation Database, based on the length of the longest runway. Heliports and Airports that do not contain a runway of greater than 5000 feet will be excluded from the Worldwide Navigation Database. All associated data with excluded airports (communication frequencies, approaches, runways, etc.) will also be excluded.

Beginning with Cycle 1911 (effective October 10, 2019):

Garmin will discontinue the Worldwide Navigation Database for the affected products listed above. The Transatlantic Database will be offered in place of the Worldwide Database. Other regionalized versions of the navigation database will remain available and will have no restriction on airports within the coverage area.

I understand the DB is not as synchronized to the real world one as Navigraph's, and I accept that limitation (whatever its reasons).

I usually fly in Argentina and Colombia, where there are several single-runway airstrips with runways shorter than 5000 ft. As I mentioned in another thread, I'm interested in purchasing the GTN750, but if I can't use it because, for example, all the small airstrips in Córdoba are excluded... well, you get my point.

How is the airport coverage in Argentina and Colombia (and maybe other Latin American countries)? For, example, are airports like SKBG, SKSG, SACC, SACD, SAOV, SAOD and some other airports without ICAO (such as AGR, VGB and VRU in Argentina) included?

I've seen this thread: 

Do these conditions still apply?

Roberto Alvarez

Caracas, Venezuela

I notice that in the C152 manual there is an option to use a 'Panel Switcher' to incorporate the 'Flight 1 GTN 750/650' into the virtual cockpit panel. 

I don't own this software and I believe Flight 1 have long since discontinued selling and supporting it.

What I am really asking, is this RealityXP GTN 750/650 compatible with the Just Flight C152?

If I can be assured that this product will show correctly in the Just Flight C152 (FSX) using the 'panel switcher' I am sure to purchase it but, I am hesitant to do so before finding out if it is fully compatible. 

Thank you in advance for any help you can provide in relation to my question.

Kind Regards

how can I make my gtn 750 FSX 2d pop out pop out on a specific screen because i have 4 and i want it to show on screen 3 I always have to undock it and drag to my desired screen and that only stays as long as fs is open and not in Fullscreen and not after restart

(I am completly new to RXP)

thanks 

franz

how can I make my gtn 750 FSX pop out on a specific screen because i have 4 and i want it to show on screen 3 

thanks 

franz

how can I make my gtn 750 FSX pop out on a specific screen because i have 4 and i want it to show on screen 3 

thanks 

franz

In FSX you were by far the best GTN provider.

PLEASE!