RXP GTN 750/650 Touch

I keep getting a 404 Error Message (File Not Found) When Attempting to Reinstall the RXP GTN 750 using either the original file (F1 wrapper) or the "rxpGTN-FSIM-Setup.exe" file that was downloaded to my PC from that wrapper. Everything proceeds normally until I get to the installation phase, at which point the 404 Error appears. Since I purchased this program back in early 2019, I just attempted to purchase a new version from the Reality XP web site without success. The web site took me to F1's purchase site but nothing happened after I typed in my purchase details (even though the site said "Ready to Purchase). Help would be much appreciated in all…

Hello everyone, I've searched and searched but didn't find any one reply that actually solved my problem. I've just purchased the M20R and the RXP GTN750. I've installed both in their default directories but its just not working properly: 1. Pressing shift+1 only gets me a blank screen (tried with/without bazel) 2. The GTN comes up when the simulator starts but if I close the window I cant bring it up again 2. I can't import any flight plans from littlenav (no import button and I've tried copying them directly to the FTPLN folder) 3. I saw somewhere that there is a F1 installer, and I've initiated the .exe file from the M20R directory, but th…

I notice that with the GTN 750 installed to replace the default GPS in the A2A Comanche, it results in much stuttering in the P3D V5 H2. But when installed as a pop-up unit, there is no stuttering. Hope to hear advice on this. Thanks.

I must be stupid or something but lately all my pop-up windowed RXP units are showing with partial transparency. I prefer them opaque for best readability. This is the case for both GNS and GTN installations. I don't want them partially transparent. I keep thinking there is a way to adjust that but I just don't remember. I have been using the + button to zoom on the VC panel display but that's inconvenient on final. Any help please? p3d 4.5 Thanks.

After a reinstall of both the Lear35 and Realty GTN 750, there is no navigation data base. No airports, no waypoints. Has anyone run into this issue and how can I fix it? I don't want to be stuck flying the Lear /A

Hi there, i bought the RXP GTN 750 Touch instead the f1 gtn 750 complete package. i have problems to use it in Carenado products like c337, because i cannot integrate this in the panel. Is there any manual/video which shows "how to do?" Thanks for your help greetings Dieter

I just did a system restore in Windows 10 and started p3d and no gtn750 in any planes. I opened the F1 installer, entered my F1 login info and got a message: 'There was an error retrieving proper data from the server. This error could be caused by a firewall or other network problems. My firewall is disabled and my internet is working fine. Thanks for any help Paul

Hi, I've been trying to import my flight plan into my gtn as the manual says but cannot see it in my catalogue, I'm using simbrief.

Will this plane do an RNAV approach with descent guidance coupled with the autopilot? If so how does one do it? Thanks

I just completed a clean reinstall of Windows 10 which also included converting my RealAir fleet from F1 to RXP GTN. Hadn't flown for some time before so not sure when this happened but I tried to fly in New Zealand last night and the GTN750 couldn't find airports (NZAA and MZWN) or VOR's (OH, NP, OR, HN). I switched to a plane which had the RXP GNS 530 installed and fit found the airports and VOR's I was trying to use. Can't say if New Zealand was in the RXP GTN 750 trainer and disappeared or if it was never included. Has anyone else noticed this? If New Zealand is supposed to be in the RXP GTN 750, how do I go about fixing this? Thanks, Stephen

Will this setup for two 750's work in P3d v4?

Saludos, Hace algún tiempo adquirimos el paquete GTN 750/650, pero no hemos podido configurarlo correctamente. Actualmente hemos instalado el GTN Trainer y el software Reality XP. Las funciones de la pantalla táctil están funcionando, pero las perillas de control y los botones pulsadores no están asignados correctamente a los módulos GTN. El fabricante ( http://www.ljcockpit.com/home.html ) nos envió instrucciones de instalación, pero no hemos encontrado la manera de asignar los botones a las acciones del paquete. La funcionalidad principal que necesitamos es poder alternar la pantalla com / nav en el módulo 650 ya que no hay forma de hacerlo usando l…

Hi Everybody! I have notice that new Garmin Aviation Trainer Launcher version 3.2.3.0 is available for update. This version has Database package updated to cycle 2104. Can we update to this version and is supported by the current GTN 750/650 application? Thanks!! Cheers, Roberto

Hello, Can't quite find a description of this in the manual or here, but my GTN 750 turns transponder altitude reporting on above ~40 KIAS automatically. Is there a setting or option to disable this? I didn't think my 750 previously did this but I could be wrong, been about a month or two since I've flown with the 750. Thanks.

Hi, to begin with, I am new to the RealityXP Universe. I just bought and installed the GTN 750 unter Prepar3d4.5 and my first impression on a 2D screen is very positive. Clear display, intuitive haptics and a host of possibilities - just great. My main aim was usage under VR though (WMR Acer AH101 at that time). I am mainly flying GA, notably the Alabeo C172RG, but also own the A2A C172, the Carenado C182 and a few more. I understand I can't simply integrate the RXP 750 into the 172RG ("Cutlass") panel (or can I?). Thus, I tried the popup. When I start the sim the RXP popup is shown indeed. After switching Avionics on, it does work, I can zoom the map, pres…

Good day all. I recently added the RXP GTN 750 to my Carenado XL560. I'm working hard to learn this complex software. My current issues are, 1. The Traffic button is greyed out. I have clicked the "Use Ryan TCAD" option clickbox.

I purchased this product yesterday and tried to download it last night and failed. I am trying to use "Click here to reinstall" button to attempt another download. I am using my email and password to validate and get error: There was an error retrieving proper data from the server... So how do I download this? Thanks Paul

I'm trying to configure the Carenado PC12 to use the Reality XP GTN 750 in P3D v4.5. I can get it installed and the course needle for the GPS points correctly, but the CDI does not work and stays centered. This aircraft also uses the GNS 530 by Carenado. The Reality XP GTN is set as master. If I switch over to localizer and set in a frequency the CDI works for the localizer, just not for the GPS.

Hello, I'm trying to integrate the GTN750 w/ the Siminnovations G5, or the stock panel of the A2A Cherokee (P3D5.2HF1). Honestly either will do at this point. With the flight plan in the GTN it integrates w/ the G5's just fine, so long as I am using GPS. The moment I change the CDI to VLOC, the G5 HSI flashes green needles for a split second and then reverts back to magenta, with the CDI needle on the HSI disappearing entirely. I have the correct NAV frequency in. I've actually tried it with the correct NAV frequency in both NAV radios at the same time, makes no difference. The whole thing is just weird, because the G5 HSI will follow an ILS when I have the…

(edit) I found the answer to the problem below at the A2A forums. With a lot of people switching from the F1 GTN to the RXP, others may need this: **Any time you switch the GPS in the panel of a A2A plane (or add a 3rd party GPS for the first time) you MUST run the A2A "Aircraft Configurator" utility. This sets up a bunch of variables that prevent exactly the kinds of problems I describe below. Now you (and I) know.** This utility can be found in an A2A folder in the start menu of your PC.. (Note: as I read over what I wrote below, it's obvious that my problem is much more likely with A2A than RXP, and I'm off to post it on their forum, but I thought I'd lea…

Hi, I have happily used my RXP 750 to guide several hundreds of flights, using flight plans produced by IdealFlight Pro. Tonight, my 750 reports "Flt plan contains unknown waypoints", plus "User Wpt. Database full". I had Little Navmap export a plan for a similar route, with the same result. I want to say that I'm neither so young as I used to be, nor so able technically. I would be more than grateful for some helpful advice, especially since I'm more of less grounded for now. Regards, Jim H.

Hello! Not having had an answer I return on this subject. RXP update new version 2.5.28.3 (June 2021) ...... etc This window is displayed at each startup of my PC, why? If I download update a message tells me that this file already exists. How can I be sure that the update has been installed? The information page of my GTN says this: SW Version 6.62.4 TRNG Reality XP 2.5.28 Is this correct? Thanks for your comments

When in Window mode so that you can put the GTN750 on a separate monitor you can not use your finger to scroll. Instead the entire menu will start to move.

Have a black screen as the sim boots up. I've checked the power source--OK. The rxp*dll.log file states the trainer is NOT found nor supported. I've installed the package which includes the Garmin trainer--I'd appreciate any help--Thanks P.S. I assume this is the source of the problem

The only problem I have is the bezel buttons not working whenever i overwrite the f1 gtn to the rxp gtn. otherwise perfectly fine any help with this? thanks in advance