RXP GTN 750/650 Touch

Garmin Launcher Crashes after Update After updating P3DV4.5 RealityXP GTN750 to Garmin Aviation Trainers v3.8.2 the GTN seems to work in P3D and the Garmin data base is updated to October, 2023 which is all great. My only worry is that when I try to launch the Garmin Trainer I get a crash of KERNELBASE.DLL . It is reproducible. I have never found a use for the trainer but I am concerned that there is a flaw in my installation which will show up and bite me later. So I would like to fix this. The install showed no glitches and my control panel says: Programs and Features RealityXp Garmin GTN (Fltsim) Installed 9/12/2024 v2.7 Garmin GTN Tra…

After updating P3DV4.5 RealityXP GTN750 to Garmin Aviation Trainers v3.8.2 the GTN seems to work in P3D and the Garmin data base is updated to October, 2023 which is all great. My only worry is that when I try to launch the Garmin Trainer I get a crash of KERNELBASE.DLL . It is reproducible. I have never found a use for the trainer but I am concerned that there is a flaw in my installation which will show up and bite me later. So I would like to fix this. The install showed no glitches and my control panel says: Programs and Features RealityXp Garmin GTN (Fltsim) Installed 9/12/2024 v2.7 Garmin GTN Trainer Installed 1/27/2024 327MB v 6.62.4.0 Garmin…

Well I took the risk and purchased the 530/430 and 750/650 units while still available. After a fair amount of work got a 530 working in a RealAir Legacy. Installed the Gtn and of course failed with the TDS MSFS trainer present. Rest of install seemed to go ok and in FSX/P3D the module requires activation during startup of those sims. Can select the GNS in RealAir/A2A planes after adding '1's to various config.ini files. Cannot do same with the GTn series. No sign of them. Read the manual about dual install but it assumes RXP is latest trainer when clearly the TDS pro setup with latest navdata from Navigraph is way more modern. A lot of …

Hello everyone. I've seen some discussions about the coverage of the RXP databases, such as this one: And this one: I understand the DB is not as synchronized to the real world one as Navigraph's, and I accept that limitation (whatever its reasons). I usually fly in Argentina and Colombia, where there are several single-runway airstrips with runways shorter than 5000 ft. As I mentioned in another thread, I'm interested in purchasing the GTN750, but if I can't use it because, for example, all the small airstrips in Córdoba are excluded... well, you get my point. How is the airport coverage in Argentina and Colombia (and maybe other Latin American co…

Hello everyone and @RXP. I'm interested in the GTN750 and I 'd like to use it in my main desktop (for P3D). Also, for when I'm not at home, I'd like to use in my laptop (for FSX and FS9). I've seen this thread: Do these conditions still apply?

Hi guys. When I launch the Garmin Aviation Trainer I have this notice of a new launcher version 3.8.2.0. My current launcher version is 3.6.4.0. My current version of the GTN 750 Trainer is 6.72.9.0. Is it safe to download and install this update? Thanks. Roberto Alvarez Caracas, Venezuela

Hi, I recently purchased and installed the excellent Cessna 152 for FSX Accelerator by Just Flight. I notice that in the C152 manual there is an option to use a 'Panel Switcher' to incorporate the 'Flight 1 GTN 750/650' into the virtual cockpit panel. I don't own this software and I believe Flight 1 have long since discontinued selling and supporting it. What I am really asking, is this RealityXP GTN 750/650 compatible with the Just Flight C152? If I can be assured that this product will show correctly in the Just Flight C152 (FSX) using the 'panel switcher' I am sure to purchase it but, I am hesitant to do so before finding out if it is fully compati…

Hi how can I make my gtn 750 FSX 2d pop out pop out on a specific screen because i have 4 and i want it to show on screen 3 I always have to undock it and drag to my desired screen and that only stays as long as fs is open and not in Fullscreen and not after restart (I am completly new to RXP) thanks franz

Hi how can I make my gtn 750 FSX pop out on a specific screen because i have 4 and i want it to show on screen 3 thanks franz

Hi how can I make my gtn 750 FSX pop out on a specific screen because i have 4 and i want it to show on screen 3 thanks franz

Will you please support MSFS 2024? In FSX you were by far the best GTN provider. PLEASE!

Is compatible now GTN trainer 6.70 with RXP ?

Hello, I bought the GTN 750 a few months ago and at the time I downloaded it directly from the official Reality XP website, installed it, and flew a lot, everything was 100% ok. Today I wanted to reinstall and use this incredible tool again, but when I click to download "E-commerce" (https://files.100megabyte.com/realityxp/rxpGTN-750-FSIM.exe) the website doesn't respond, It's as if it was impossible to access... and I can't download it. I wanted a solution. thanks.

Where does reality GTN 750 store flight plan library? thanks

RealityXP needs an Update for new P3D 6.1.0.31609 (Patch 2) Currently Autopilot not supported: 24/02/07 12:50:52.935 18996 - ] # rxpGTN.dll version 2.7.8.0 24/02/07 12:50:52.935 18996 INFO ] 24/02/07 12:50:55.937 18996 WARN ] Autopilot not supported on this platform (vers: 6.1.10.31609)

Hello, Does the Reality XP GTN 750 work with the RealAir Simulations (RAS) Lancair Legacy? I have the Flight 1 GTN 750 running in P3D v5 on the Lancair Legacy but have upgraded to P3D v6.1 and it does not work there -- the RealAir Legacy does. So, the second question is, if the RXP GTN 750 does work with the RealAir Legacy, does it work in P3D v6.1? Oh, the 3rd question is, if it does work with the RealAir Legacy, does it connect to the autopilot? If it works with the RealAir Legacy in v6.1 and connects to the autopilot, I'll buy right away... Thanks! Valin

RealityXP GNS and GTN Updated to v 2.6.9.0 today 3-5-2024

I'm unable to get the Reality XP GTN to completely load up in P3D v5 (5.4.9.28482). I've tried a number of times, using the included panel assistant. The existing panel clears a space in the Lear's panel for the GTN 750 but the unit does not appear (pic attaced). I suppose it's something simple I'm missing. Does anyone have a clue? Thanks in advance, Beckantor

Hello, I tried to update my GTN 750 add-on, and unfortunately I also updated the trainer, which has broke my add-on. So, I uninstalled the Garmin Trainer and I tried to install the 6.50.1 version as you said here : but it doesn't works I downloaded both files you provide with a link (GTN.Setup.msi and Launcher.Setup.msi) but the installation doesn't works. When I run the installers, I get this : And after 5 seconds, the installer disappears. I really don't understand why, I disabled my antivirus, my firewall but still unable to install the trainer. When I download the last version of the trainer from the garmin website, the installer work…

Hello. I have purchased the RealityXP GTN750 for X-Plane 12 and spent a full day trying to make it work on my computer* to no avail. Reluctantly, I decided to swallow my pride and reach out to this community. The GTN750 is version 2.6.1.1 and X-Plane is version 12.0.8. To be clear, I am not eve sure the automatic install routine was successful. The 750 seems to work in X-Plane but it cannot detect the Garmin Trainers. When I try to download the trainers using the links RealityXP provides the installer says that they are already installed. I have read the manual that comes with the software and it is not helpful. For example, the manual states tha…

Before updating, I would like to know if RXP GTN 750 works after installation of P3D v6.1. If anybody there knows, thanks for the info. B.

Hello all, I just upgraded my triplescreen setup to gsync monitors, they work great untill........ You open the gps window and undock it to move it to my 4th screen. Gsync breaks and all is unusable. I can only dock the window in the window00 wich is my main screen. Running it standalone would be great but is impossible.... any ideas? Kind regards, Remco

On a flight right now, flying heading mode because GTN750 (I got it setup and installed correctly) will not follow FP when I click on "NAV" on the Carenado Saab 340 MCP. The aircraft should be turning right 15-20 degrees to intercept the waypoint but instead it keeps wanting to turn left. I have to press HDG mode on the MCP to get pointed in the right direction. It would be nice if Jean-Luc could help out with this...Regards

So, is possible to use GTN on two computers and how ? My soon bought powerful PC and i want to fly sometime with 4k and ultra settings, rest of time i fly on my laptop...

Simple question, if I would buy RXP GTN750 for P3Dv5 now, would it work correctly with Window 2010? Yes or No?