RXP GTN 750/650 Touch

Hi! I am using F1 GTN 750 for a long time, but last black Friday I bought RXP GTN 750 an I would like that somebody helps me integrate with Milviz c310 redux. Could someone help me? Thanks,

I just purchased this product and I'm having this same problem. I have the Carenado C310R and the GTN 750 has replaced the 530, but the screen does not come on. Any ideas?

Hi, I started P3dv4.3 up today and after loading to the cockpit both GTN 750 and 650 (both latest releases) stay black and I receive a message that the "GTN trainer has stopped working, a problem caused the program to stop working correctly". P3dv4.3 is run in normal mode. Trainer version is the latest as installed by GTN software. Operating system is win7 pro and no antivirus software on sim PC. GTN Gauge log.. 19/03/23 12:22:52.272 06236 - ] # rxpGTN.dll version 2.5.14.0 19/03/23 12:22:52.271 06236 INFO ] GTN Menu Log.. 19/03/23 11:50:19.041 05428 - ] # rxpGTN_menu.dll version 2.5.14.0 19/03/23 11:50:19.043 05428 INFO…

I just purchased the GTN750 and installed it into the default learjet aircraft. I've tried multiple different RNAV LPV approaches KCMH was one of them and with flaps and gear down and approach activated, the system will not intercept and follow the glide slope. I've double-checked all the of the settings (right-click on panel) and setup as suggested in another topic. The approach automatically switches autopilot to APP and turns off altitude hold. Does anybody know why this would not be working? The glide slope is shown on the display, but does not get followed like on ILS. It seems there are other complaints about this but I have not found a resolution.

Good evening I would like to know if the GTN750 works in prepa3ed v. 4.4 on an external touch screen monitor in undocked window.

A2A 250 Comanche RXP GTN 650/750 A2A Piper PA24 250 Comanche configuration for the GTN 650/750. Also includes the GNS 430/530. This setup allows the use of the Comanche 250 Aircraft Configurator_P3D app. https://www.dropbox.com/s/1tf3ur7ly2hqydw/A2A_250_Comanche_RXP_GTN650750_GNS.zip?dl=0 The following instructions are included in the ZIP file. First things first. BACKUP the following files in the A2A_Piper_PA24_250_Comanche panel folder. panel_default.cfg panel_F1_650.cfg panel_F1_750.cfg panel_F1_dual.cfg panel_MINDSTAR_430.cfg panel_MINDSTAR_530.cfg panel_MINDSTAR_dual.cfg Important: Regarding the panel_default.cfg file (if you DO …

In P3Dv4.4, I see the following: 1. I load the default Baron58, open the GTN750 popup, and then open the GTN Configuration Panel, make a change, save the panel, close the GTN750. 2. Select a new a/c like the Carenado Commander 114, open the GTN750, then open the Configuration Panel, but the panel is still labeled as the Baron58 panel, and if I make a change it is in fact the Baron50 GTN ini file that gets changed. If after restarting the sim I reverse the above sequence and start with the Carenado Commander 114 and then switch to the Baron 58, when I open the Baron's Configuration Panel what I get is the Commander 114's configuration panel, so the same type…

Hi! I have installed Papua New Guinea Scenery from ORBX(Tapini) and I tried to make a flight from AYTI(Tapini) to FANE, or Woitape. However, I cannot find the airports except Tapini in my GTN 750. When I make my flight plane by key in FANE or Woitape(by its name or ICAO), none of them can be found. Does that mean it doesn't include the data of those airports? If so, is it possible to add them? Thanks!

I just bought the GTN750 and GTN650 from Reality XP and I am experiencing a problem setting GNS up on some of my planes in FSX-SE. I am able to access the setup window from the Add-ons menu to configure default aircraft and others that are installed under the SimObjects/Aircraft directory, but if I try to access the setup menu for aircraft that have been installed in other directories, the setup menu never appears. For example, one of my Steam purchases is installed under D:\SteamLibrary\steamapps\common\FSX\DLC\896744\SimObjects\Airplanes instead of the default directory, D:\SteamLibrary\steamapps\common\FSX\SimObjects\Airplanes. If I load up that aircraft and click…

Hi, I am using the GTN 750 (2.5.12.0) with P3D v4.4 and the Flysimware Lear 35A. Single GTN Unit, weights configured to be lbs, fuel type JETA. No matter if I use the Shadin Fuel Data computer or not, the Fuel on board reported by the GTN is always about 11% too low. The Lear35A maxes out at 6238 lbs, which I can load and use via P3D. However, the GTN displays 5619.9 lbs. The value is consistently off by 11% on every fuel loadout. I don't know how accurate that stuff is supposed to be in the real world, but 11% seems a lot to me. Units in P3D are "hybrid", so I put in the weights in kg, which are correctly calculated in lbs in the Lear…

It seems that nothing I do can keep the MasterDevice ini file setting to be true. I am using a single GTN 750 in Win10/P3dv4.4. I have tried using the 2D popup configuration tool, have set MasterDevice = true in the GTN ini file, have even tried locking this setting in the GTN ini file, but for example, if I reload the plane for some reason the MasterDevice setting is back to false in the ini file -- VERY frustrating. When using the 2D popup config tool, I click on the MasterDevice setting to set it to true (light blue) and then click on Accept which closes the 2D popup, but nothing has changed in the sim. Sometime the setting may seem to be OK for a short while, t…

A2A C182 Skylane configuration for the GTN 650/750. Also includes configuration for the GNS 430/530. This setup allows the use of the C182 Aircraft Configurator_P3D app. https://www.dropbox.com/s/o2ybc9g4d8hfuy6/A2A_C182_Skylane_RXP_GTN650750_GNS.zip?dl=0 The following instructions are included in the ZIP file. First things first. BACKUP the following files in the A2A_C182 panel folder. panel_default.cfg panel_F1_650.cfg panel_F1_750.cfg panel_F1_dual.cfg panel_MINDSTAR_430.cfg panel_MINDSTAR_530.cfg panel_MINDSTAR_dual.cfg Important: Regarding the panel_default.cfg file (if you DO NOT own the RXP GNS430 do not copy this file). This file p…

I had the GTN 750 working just fine, now all of the sudden any aircraft I have the GTN installed in just has a blank screen (although it is "lit up") so I can tell that avionics power IS on. Also there is a message in bottom left of the screen that says "starting". Checked the manual and that the gtn file is set to nvidia processer and it is. Like said, it was working just fine now it isn't. GAU log: 19/03/09 23:14:25.811 10440 - ] # rxpGTN.dll version 2.5.13.0 19/03/09 23:14:25.811 10440 INFO ] Menu log (menu is showing up just fine though) 19/03/09 23:14:21.464 07656 - ] # rxpGTN_menu.dll version 2.5.12.0 19/03/09 23:14:21.472…

I run FSX Acceleration in W7 x64. Getting back to flying after a longish absence. My Real Air Beechcraft Duke has both the RXP GTN 750/650 and the GNS 530 installed. When I load the aircraft I get a message to the effect I can't run them both. The GNS 530 is integrated into the panel and looks neat. The GTN 750 is on the stack and a PopUp. How best to uninstall the GNS 530 without messing up the panel? Thanks!

I would like to check my understanding of the following GTN ini file options because I find some of the comments a bit cryptic. ; connects GPS to Autopilot if true. LinkOto = true I know what this does, but what does the O in LinkOto represent? Seems like LinkAP would be clearer. ; connects GPS to HSI if true. LinkHsi = true Does this mean the GPS drives the HSI’s course deviation bar? ; connects GPS to HSI course motor if true. LinkCrs = true I assume this means the GPS drives the HSI course pointer arrow. ; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS) (NB: HSI/OBS = NAV1 OBS). LinkObs = true …

Hi: I have tried for days to install GTN 650 into FSX-SE. I have repeatedly installed the RXP software and the install seems to run but nothing happens. have tried running the install from administrator as well. The install fails to create a desktop icon as well as it does nothing. There are no error messages. The GTN Simulator works perfectly as a stand-alone. FSX-SE works perfectly. There are NO LOG files in Documents as referenced in the user's manual. I hope someone can help. Jerry PS, Here is the FSUIPC$ log file contents if it helps. ********* FSUIPC4, Version 4.971 (16…

i just downloaded RXP GTN750, and bought real sim gear GTN750 touch screen - however, I can't get the gauge to work in FSX SE - but I can in Xplane 11. Ive downloaded both plugins for each sim system - however the FSXSE version just won't work. It shows on my addons but doesn't work or ends up crashing the system all together, if anyone has a fix or is willing to look at it for me, it would be much appreciated!

Hi- I bought the RXP750 way back in April 2018 from F1. I've been using their version but want to move over to your software. Seems like there's a ton more support :>) Anyway, regarding the 4.4 update, if I download that again after you've completed the compatibility update, will that update be included in the download or is this done by the software after installing? Thanks, Mark

I have the GTN 750 installed with fsx and it all works fine. My question is can I run the allready installed GTN Trainer as a stand alone without damaging my FSX instalation..

I am having another problem with my new GNS 750/650 gauges that I'm unsure how to fix. Sometimes I am able to access the gauges for aircraft where I've modified panel.cfg, but then the second or third time I try to access one of the gauges I get the following error message and the gauge popup will not appear. I found this exchange with a Google search: https://forums.x-plane.org/index.php?/forums/topic/162529-reality-xp-warning-a-monitor-program-has-been-found-running-in-your-system/ In it, RXP says, "This message is due to the use of system monitor and this is expected: this is our software protection doing its job." My guess is that this means it's …

Hello all, I recently read that someone had installed the RXP GTN750 into fs2004 although no aircraft type was mentioned. Can someone confirm for me that this is indeed possible? I have in mind the Feel There Embraer 100 to put it in to, and specifically for flight planning initially. Thanks Tony R.

I decided to download the .13 FSIM update for the RXP GTN 750. The file downloads, but doesn't run at all . I'm not at the e-commerce installer activation limit. My network connection is okay. I tried downloading it a couple of times. EDIT: I just did a few more tests. The RXP GTN XPL installers work as does the F1 installer. Its only the most recent RXP GTN 750 installer that fails to start.

ISSUE RESOLVED - I had failed to reboot PC after updating Garmin. Rebooted PC and fired up P3D - charts are back Hello, I just updated my Reality XP GTN 750 to version 2.5.13 and upon first load, I received MSG -> CHARTS UNAVAILABLE. What happened ? Thanks for your support.

Hi I am struggling to get the flight plan import 'button' to show up. 1 I have upgraded RXP to the latest version. 2 I have followed the instructions in the RXP manual and have created a FPLN folder at C:\ProgramData\Garmin\Trainers\Databases\FPLN and I have unzipped the trial data into the folder. Then restarted P3DV4. Went to Flight Plans and Menu and still no import button. Have the instructions or location changed, please? Thanks Dean

Hi guys, Getting ready to purchase a RXP product for use on my favourite twin Realair Duke B60 v2 (piston), I would prefer to have a GTN750 unit although the Duke was never designed to take one? Has anyone managed to panel intergrate the GTN into the Duke, or will I have to get the RXP GNS 530 for this aircraft? Regards Gordon