RXP GTN 750/650 Touch

Hi Jean-Luc I have asked in the FSW too but since switching from a competitors options to yours (for performance, support and update reasons) I cannot fly RNAV approaches anymore. The plane does not display the vertical information on the Flight Director let also the AP following it. Do you have any clues where I should look config wise to see if the plane and unit are talking to each other correctly? Thanks a lot.

As the Title says.....Since upgrading to the latest GTN 750 I have lost the ability to shift right click into the config menu for the 750. The 530 is working fine still but not the 750.....Ack!

Hi- Here's a post I made over at the FSW forum but have not had a usable solution yet so I thought I would try here ----------------------------------------------------------------------------------------- I've been running around in the Dash 8 for a couple of months, completely ignoring my favorite aircraft, the Lear. Shame on me. So, feeling guilty I went ahead and downloaded the latest version, along with the most recent version of reality XP. All that went fine as usual. Everything run as admin. After the initial install, I loaded the Lear in a default setting, closed sim. Went into the management console and added the GTN (1) and closed. Lo…

Does anyone have a panel.cfg for the Carenado KingAir B350, B200 and C90?? Thx!

Dear friends, Some days ago I bought a GTN 750 and GTN 650. The problem is now, that the ILS-approach does not work any more. I put both CDIs into the VLOC-mode, the device accepts the localizer, but it don't come down on the glidepath although the autopilot is in the approach mode. It is not so, that is doesn't work properly (like a wrong glide-path-angel) it doesn't work anyhow.

After installing the RXP GNS-530 into P3Dv4.4, I could see it appear as a GPS option in the A2A C172N and the Comanche 250 Aircraft Configuration program, and I was able to place it in the A2A panels just fine. After purchasing and installing the GTN-750, it does not appear in the Aircraft Configuration program as an option to use in the Reality-XP choices. Only the 530w. I also see the FS1 GTN750 as a choice. Should I see the RXP 750 listed in A2A's Aircraft Configuration? I tried using the Add-On menu installer, but the only thing I could get to be visible was the Pop Up GTN750. I only bought the RXP 750 to use with RealSimGear's bezel that I just ordered, so I wi…

I have it installed in P3Dv4 lastest version and it works with some planes but not all planes..example; in A2A Bonanza it will not follow a direct to plan. I setup the airport and then direct to the destination airport and a pink line shows on the GTN so I know it has a plan activated. I get in the air and select the Bonanza auto pilot and it will not connect or follow the pink line. Same with a few other planes. I do have the config set to master and set to connect gps to autopilot checked. Unit shows up in aircraft and shows map and such.

Confused if I should also post here but I want to fly the FSW Learjet 35 today! This morning updated the RXP GTN and now my FlySimWare Learjet 35 has a stuck light test. Is it related to the GTN update?

I purchased the Reality XP GTN 750 from Reality XP. When trying to install it in X Plane 11 I get the 404 error. I understand it has to do with a new version of the Garmin trainer. And I guess I won´t be bale to install the GTN750 in my X Plane 11 until the new trainer version is online. So where do I go from here ??? Help would be appreciated

In the Release Notes for 2.5.22.1 is: " Fixed: Shared datarefs values can fail 3rd party aircraft integration. " What does that mean? Kind Regards,

Hi I recently purchased the RXP GNS 750 and have it installed ok. I recently had an update message and downloaded a zip file (rxpGTN-FS) that had exe in there. I ran the exe rxpGTN-750-FSIM and when running the sim it says my SW is 6.62.0 and RXP is 2.5.22 I am however not seeing the latest database as expected, can someone point out what i am doing wrong and how to update correctly? At this stage all i did was run the application and expected it to overwrite any file necessary, was this the incorrect method? Any help would be appreciated. Cheers Barra.

I am having some problems updating my Reality XP. Garmin 750/650 from version 2.5.21.0 to 2.5.22.0 Same happened when trying to install 2.5.21.1 It downloads and appears to install but does not appear in the sim Will I have to do a complete uninstall and reinstall? xxd09

Hi all, Just upgraded from the GNS430 to the GTN650 for P3Dv4, and have a query regarding the database. It states it contains the Jep worldwide and Garmin Americas, but i'm not getting any Australian airports using the Jepp option, curious if anyone else downunder has this scenario, and if there is possibly a way to update to a recent Garmin database for Australia? Kind of unusable purchase for me if not. Thanks

Just purchased this plugin, works great in 2d but in vr in p3d 4.5 it has the pop out window out infront of the windscreen with a view of the virtual cockpit instead of the 750 any help would be greatly appreciated Scot

I have trainer version 2.5.0.0 installed (at least that's what the Garmin Trainer shows when I run the trainer), which appears to correspond to v6.62.1, however the RXP GTN 750 shows currently installed software: SW Version: 6.62.0 TRNG; Reality XP 2.5.21. What's really interesting is that when I open windows 10 apps setup, the installed version of Garmin Aviation Trainers is 2.4.0.0. What have I done wrong? Kind Regards,

Hi all :) I'm trying to get the 750 to work in my new iFly 747 and so far am having no luck. There is no nav/gps switch and I can't get the unit to control the plane. Any help would be greatly appreciated.

If I have an SD card with the latest database can I use the files to update the Garmin Trainer on my computer? Sorry about the newbie question thanks.

Anyone no how to setup button (ch throttle) in fsuipc to toggle 750 gtn? I have the key press setup.

I need to reformat or re-image/recover my Windows 10 pc. How do I un-install the GTN 750/650 and trainer so that it doesn't adversely affect my ability to re-install it again in the future in the same PC? I'm concerned about the DRM making me jump to hoops and give me problems just to install it again. Please advise. Thank you. P.S. Is this the official support forum for Reality XP?

I've just purchased the GTN 750 so that I can use it while flying the Flysimware's Learjet 35A in VR using Oculus Rift. However; since adding it to the panel my frame rates drop to a point where I continually get an hourglass popping up and the screen stutters to a point where it is unflyable. I'm running Intel Core i7-8700K Liquid Cooled CPU, 11GB GDDR5X NVIDIA GTX 1080Ti GPU, Windows 10 Professional, 1TB PCIe SSD + 2TB 7200RPM HDD, 64GB DDR4 RAM

Is there any config for the f1 GTN750/650 for the Carenado C208B Grand Caravan? (NOT the EX model) Not only RXP?

I have used the GTN750 for P3D a few months now, recently the 2d panel is way too opaque to use well, and I cannot find the setting to put it back to normal. Any help would be appreciated! Thanks -Tuggz https://imgur.com/a/0yiPyp9 https://prnt.sc/qj2atf

Hi I use the RXP GTN 750 with the Realsimgear hardware bezel which is a fantastic combo! My only problem is how to lock the GTN display on to the bezel. Every time I use it I have to be very careful with my touch so the display does not move around within the bezel. I cant seem to find a menu option to lock the display like you normally can from a menu if I recall by clicking the right mouse button. Any ideas?

Hello. I'm having a little problem with my GTN750. In the virtual cockpit of my plane the GTN works flawlessly, but when popped out in a window i cannot click certain buttons, particularly some located on the left area of the device. In the home menu, for example, if i click on the charts button the pop out window closes inmediatly. Same happens if i click on the back button of the map, or if i click the Q, A or cancel button when the keyboard is displayed. It makes tipyng waipoints impossible in the popped out windows. I use the GTN in a second monitor, so the pop out window is a must for me. Anyone has had this problem? any help will be welcome. Regards.

Hello, I have had my GTN unit built into my FSW Lear35 for a few months now (which I love btw), but lately I have been getting these freezes. I have a crash app that records all freezes and crashes on my computer and lately it has been pointing the fingers at the GTN program. All of the crashes are .dll’s within the GTN, one of the common ones being KRNLSIM.dll. Any ideas on how to fix these crashes? They’re happening more frequently than when I first got the system.