Pilot2ATC Users Forum

When the "Play Chatter" box is checked, my X-ATC Chatter audio will occasionally walk over my ATC audio making ATC difficult to understand. Is there a way to mute the Chatter whenever ATC audio is either transmitting or receiving? I mainly use the "SayIt" function. Checking the "Pause Between File Playback" box and using large pause times is not a good solution. Rick S.

Hello I have a problem in MSFS2020 with X ATC Chatter and Pilot2ATC. I have installed the different Regions folders like in the manual and it dont work. Im been searching for fix for that problem for one day on different pages and youtube videos. I have the Trail version of Pilot2Atc and the sound files are all mp3 files, I saw in a video that the guy have .wmv files. But when i change to .wmv files nothing happens. I have turned up the radio volume but nothing changes. But there are just 3 buttons mute, DN, UP and no scale where i can see how high i turne it up. Is that normal ? Thanks for your help. I hope you can understand my en…

New to Pilot2ATC here, but have been through the user manual plenty, watched all the tutorials and spent hours reading on this forum. Been searching for the issue for a while now using search here on the forum and cannot find anything. Problem I'm seeing is the IFR-LOW map's airways. No idea what other lines it's showing but they aren't just the airways. I've de-cluttered by trying everything else off (NDB, VOR, APT, etc) but they aren't the issue anyway since it's the over abundance of the lines. Even if they were also the vector ways, jetways & airways combined there wouldn't be such a thick amount of spaghetti. As can be seen in the images, I'm usi…

I am sure this is something painfully obvious, but I cannot find it :). How would I ask ATC for vectors when flying VFR and getting slightly lost enroute? Also for some reason lately the TOD instructions are not triggering for me. I am way past my TOD on the map and there is silence from ATC.

Hello, I requested taxi to runway 18L at EHAM and this is the routing I got : It basically routed me to the opposite end of my departure runway and had me backtrack all the way back. I am using default P3D 4.5 EHAM The rest of the flight went without issue. Thanks Alex Logs: https://www.dropbox.com/s/eke8srp0otyc833/P2A_2020_Trace_File1.zip?dl=0

Hi Purchased program today just wondered how long it normally takes to receive a reg key? Cheers

Hi, This is beginner question, but hoping to get some answers here. When I use flight plan in pilot2atc and press "file", shouldn`t it go to my plane in MFSF? Doesn`t seem to that. T

Starting from an ordinary Flight Plan, IFR, I activate "Direct to". In order to make "Direct to" work properly, I need to use the "Clear" button before the "Load" button. If I do not do this, I have to push "Direct to" two times before getting the expected result. Nota: There is no mention of the use of "Clear" for this purpose in the user's manual . So, to have it working: Method n°1 "Direct to" Choose airport "Load" Result: Flight plan erased "Direct to" "Load" Result OK Method n°2 "Direct to" Choose airport "Clear" "Load" Result OK

Playing back ATC chatter files in a random order is on the list of improvements - I don't believe it made this latest version (2.6). In the meantime has anyone come up w/ a way to make this happen? Also, do the chatter files play in their order in each folder? I guess we could rename/sort the files differently each time if that would work. I have the first 25 mins of chatter memorized and it hurts the immersion of the software. Thanks!! Chuck

Okay, not really. Just wanted to say I just got Pilot2ATC and am loving it! Haven't been on Avsim in ages and didn't expect anything this great to be available for MSFS this soon. Again, loving it! I had a similar product last time I was a die hard simmer and nice to see this surpasses it (not to mention this actually has active support). I've invested in some Cereproc voices over the years and seeing I could use them in this made me buy it without trying the trial. No regrets. Lots to learn, sure, but have hit the manual often and just found a few answers to other questions here in the forum. Special thanks to Clumsy and his fine video that introduced this and …

Is Pilot2ATC compatible with latest version of P3DV5? Downloaded and installed FSUIPC5 which installed into the V5 modules folder ok. Created and validated a flight plan in Pilot2ATC, but unable to to connect. Am I missing another program, like Simconnect? Any help appreciated.

Hi can anyone help. I have installed FSUIPC 7 and the Boeing 747 works fine with P2ATC but cannot get the A320 to work. I get the ATIS working but cant communicate with ATC , dont even have the "Speech Assistant" available when I use the '?' to get the say it choices. Appears all other aircraft are fine just the NEO. I do get Sim Connected and Grammar loaded as proof it works with the 747. I am missing something. Bobbu

Hi, I remarked, that the frequencies in the Nearby-Window don't change automatically. To get new nearby frequencies I've to change the range e.g. from 25nm to 50nm and then back. It would be wonderfull if this spectrum of new frequencies in the switched range would change automatically and the frequencies which are out of range in the meantime should disappeare automatically, too.

Hi Dave, I don't know if you've used MSFS 2020 yet but I ran across something odd when importing a flight plan. This is a flight plan from KPHX to KSAN. It was constructed using Simbrief. I exported to MSFS 2020 and P3Dv5. Once I import into P2A and do autoplan I get the normal output with the P3D plan but get a plan with a bunch of extra waypoints when using the MSFS 2020 plan. I've added screenshots of both to compare. I'd be curious to know what you think. MSFS 2020 P3Dv5

As in the title: Is this possible with Pilot2ATC, if yes, how? Use case is mostly listening to ATIS without switching off Center/Approach etc.

Greetings all! Having a great time with P2A! It took a bit to get everything up and running, but wow. Very impressed! I also pickup a sub. to Navigraph so that the database could be updated etc. I actually find it easier to make the flight plans inside of p2A LOL. But, one thing I have noticed. If I do make the plan in p2A and then export the *.pln file.. then, import to NG Charts.. I get errors on things that dont match. This is confusing, as they both are on the same airac. Is this normal?

Hi All, I'm currently testing the trial with X-Plane 11 and have issues with approaches. The only flight were P2A brought me to the runway was when it let me fly the STAR to the end. On other flights, although I followed instructions to the letter, vectors never brought me safely to the runway. I made several flight and here are the results: - LSGG-LSZH: success, let me follow the STAR to the runway - LSZH-LSGG: fail, vectored me and cleared me for ILS after I passed the loc and way too high. After this, I changed the Vector lenght distance to 5nm in the config. - LSZH LSGG 2: half success, vectored me to the loc, but too high, had to dive …

Unable to connect with P3DV5. Downloaded FSUIPC5 and loaded ok into the V5 modules. Loaded and validated flight plan. Is current version Pilot2ATC compatible with P3DV5? Otherwise what am I missing? Appreciate any and all help Darrel Z

Hi, it's an amazing tool, but it's partly like in a coffin. Therefore it would be nice to have AI chatter synchronized to e.g. Traffic global (I use it) and other AI traffic tools. The advantage here would be to learn the ATC phrases faster and better and the sky would be filled with life even more realistically, isn't it?!

Are there a possibillity to get the P2A window with interaction on an iPad like the tool/plugin Web-FMC and it's easy way? That would be so great and significant improvment for this outstanding tool.

I'm using 4K resolution and the moment I turn on Pilot2ATC it covers almost half the screen and is in a really blurry and bad resolution. Please give me a solution regarding this. I wish to buy your software. Moreover, Speech Assistant does not show the words "Request" or any other type of call that can be made to the ATC . I am attaching a screenshot for the aforementioned issues. Screenshot Link: https://drive.google.com/file/d/1_u5HqMjwg5bNhiqG6bojV4m0FxgVhcJa/view?usp=sharing

Hi Dave. I may have missed this in some other thread if so, sorry. I have noticed that on most msfs2020 aircraft, changing the transponder to ALT does not change it on P2A. There is stays inactive. I can change it manually on the P2A screen, which is OK, but wondered if I was missing something. Thanks for any help. Rich Wilson

New to pilot2atc I made a flight plan in P2Atc and exported it but when I open it in MSFS 2020 it just has a direct flight path and none of the additional waypoints from departure and arrival. Any help would be appriciated

How does P2A determine active runways? I have it set to NOAA weather, and I'm using live weather in MSFS 2020 and Sim Brief. Flying from KJFK to EGLL, P2A set the active runway at 31L, even though Sim Brief was showing 4L with winds around 030 at 8kts. Also, I tried to change the runway in the flight plan- I clicked on KJFK, clicked SIDs, changed to 4L, and clicked set runway and load. But while it changed the departure runway to 4L, when I filed the flight plan, it changed it back to 31L. Finally, when I imported the flight plan from Sim Brief and tried to change the cruise altitude and validate and file, I kept getting an error message that it couldn't calcula…

Hi, Flying from ENGM for the first time. So I went to Taxi Maint and updated Taxiways and Gates. The airport image was current Google Maps 2020. When I connected to the sim the ENGM image was outdated and missing a terminal. I have an image to share but unable to upload to this sight. P2ATC 2.6.1.3 Rgds