Pilot2ATC Users Forum

Greetings everyone! I have enjoyed X-plane 11 for years. Now it's MSFS 2020. Really am so happy with everything. Honestly, the built in ATC is pretty amazing as well (sounds amazing) and I would be happy with it, if only it were a bit more accurate in terms of when to instruct for descent. Also, navigating around terrain is an issue for the stock ATC along with other little bugs that can be annoying. I actually thought about just going with Pilots Edge this time around. But, still need to build my confidence. So, I saw that Pilot2ATC is still current and works with MSFS 2020. So here I am. For the most part I am pretty impressed, tho there are some th…

Hey Dave, I have a 2 monitor setup. I usually run flight sim on the main monitor, and P2A on the 2nd. That all works fine for the main window. However, when I pull up some modal/modeless dialog windows (specifically: Add Waypoint, Modify Waypoint - the one with the add/remove airways, Load Airway) they always come up on the primary monitor. Even when i move them over to the secondary monitor, the next time i pull them up, they come back up on the primary monitor. The Info and Config Window never do this, they always come up on the monitor where the main frame window is. Sometimes the SID/STAR windows come up on primary, but mostly they come up on the seconda…

I have an issue with exporting a flightplan to the Inibuilds A300. The FMC doesn't find the exported plan by P2ATC. It uses the standard X-plane 11 flightplans. If i export with simbrief it works perfectly. I read something about different formats what could be causing this. Something about a legacy format and a new format. Any idea what could be causing this and how to fix it?

Hi there. With the latest X-Plane updates, my Pilot2ATC no longer sees air traffic generated by World Traffic. For example, previously I would have P2ATC have me line up and wait before takeoff to allow incoming flights to land. Now it no longer sees those flights and clears me for takeoff. The WT3 developer inquired as to whether or not P2ATC uses the next X-Plane TCAS interface.

Hi Dave , to create IFR flight plans, I find it more practical to use LittleNav Map which in addition allows you to detach the map 'only' at the desired location and size. But at the same time I use PAtc for ATC and vocal recognition. and I must therefore import the plans made under LNM in .pln here is an example of 2 .pln files - They are perfectly imported in MSFS version 1.8.3 but in P2Atc problem with LFTZ. 1) LNM : and problem in P2Atc : Here the files.pln .zip http://cd91.eu/MSFS/LnavMap/pvols.zip Hope this helps you solve this problem. cordially

I haven't changed anything on my PC and since that day when I run P2Atc it opens but does not display the interface.here is the error indicated: whereas I absolutely did not launch P2Atc twice. I restarted the PC and it didn't change anything. Ps: I am going to turn off my PC 15 'and restart it then launch P2Atc again, and I confirm this problem.

Hello, I am used to fly multiplayer with a friend and, as we want to practice ATC together and both to buy Pilot2ATC, we are a bit frustrated because we can't here what the ATC says to each other. So our flights are usually punctuated by me or my friend asking "Did they answer? What did they say?" Of course there are always our readbacks but as we are noobs we sometimes take a "long" time to answer, and anyway it breaks a bit the immersion. We usually use Discord to talk to each other. I was wondering if there would be an elegant way, or just a workaround to be able to also share Pilot2ATC sound?

Hello, Discovering this awesome software. I was flying a VFR flight with clearance from Class C to Class C airports and when I was cleared to takeoff I was never asked to contact approach. Instead I was asked to contact ground but I was already in the air. When something like this happens what is the solution? Saving the plan, quitting, reloading? Then contacting approach directly? Or staying with Tower? Should I request the VFR clearance again? thanks a lot

I'm constantly moving stuff from drive to drive, My license never seems to work afterwards. I hate emailing to explain myself, like I'm a child to get the license working again. Is there not a better way to get my license to work.

Just bought P2ATC however I cannot get any phrases to come up on the drop down “Say it” menu. I do however get an error every time I connect, saying it cannot find my microphone. (Obviously because I don’t have one). anyone have a trick up their sleeve?

Hi. When I connect to the ATIS frequency, there is nothing but silence. I have set weather to NOAA, and the weather shows up when I press the WX button in the p2atc client, but nothing on the radio. I've tried several airports, but nothing there. Is it a problem on my end, or is it something that does not work with msfs 2020 yet?

Bonjour, Can this module in pilot2Atc work under MSFS 20? Because it is recognized that for the other countries of the sim outside the United States, the information of the airports: door, parking, names taxiways are totally fanciful! I was wondering if your tools: gate and taxiway maintenance, in p2Atc would not allow to start an update job on our airports. Here are some pictures to illustrate my point subsidiary questions: 1) the gate and parking numbers are also different from those of P2atc (which in reality seems correct) how the software made to recognize it? 2) P2atc help to follow the road to the track so c…

Hi all, are there any experiences with P2A and X-Life traffic? I use X-Life Deluxe with X-Plane 11.50 and I like the traffic with very well aircrafts and performance. The X-Life ATC isn't really convincing, therefore I decided to buy the phantastic P2A. Unfortunately I don't able to see the X-Life traffic on my P2A screen. The flight config settings for AI-Aircrafts like in the topic AI Traffic with X-Plane from Wailbal concerning WT3 is obviousely not possible for me with X-Life. Maybe I overlooked something or I didn't noticed an important setting. Any advice are most welcome! Rolf

The Pilot2ATC 2.6.1.3 says it has AIRAC 1801. But the newest AIRAC cycle is 2010. When it is going to update it. (I beg your apology if I misunderstood the thing and raised a stupid question). Rahal Widanagamage

Hi, I'm trying the Trial version right now on MSFS 2020 and while I like most of it, I never get the descent instructions when I'm at the calculated TOD (shown with green arrow on map). I know the TOD gets recalculated during the flight, however e.g. last flight I only got the descent instruction when I was right on the STAR and requested an arrival (I thought the STAR entered into the filed flight plan would get assigned automatically...? Or do I have to ask for it by PTT at some time? Was that the reason I got no descent instruction? Still, it should follow the flight plan altitudes / TOD, shouldn't it, even without an assigned arrival?) Anyway, instead of the en…

I just started using Pilot2ATC, and I love it, but I've come across some odd taxi instructions. I installed FSDT's new ORD, and flew from KORD to KLGA in the a320nx. At ORD, the taxi instructions didn't make sense to me - taxiing from A10-T-T10-kilo (makes sense) - mike, holding short R9L and R33? As I started to taxi, it told me to cross runway 15. Not sure if the issue with KORD, but I thought I'd mention it. Thanks!!

Maybe someone can help! I downloaded Pilot2ATC for the first time today to try it before purchase. After I install it and run the program it i gives me a message that my license expired on 8/14/2020.The problem is I've never had the program in my computer until today. I would be grateful for any suggestions. Dennis Volz.

Hello, on this small screen, the map is really too small. Would it be possible for you to make a second style button (FPL) which would display only the map and when it would be necessary and again press the button to see that the part: COM and voice-voice module .PTT etc. On my PC w10, the white card-com separation bar does not allow to reduce or increase the card part or Atc com etc .. Merci.

everything seems to work well until takeoff. After departure responds to my check-in after takeoff, I never hear from them fir the rest of the flight.

I have received taxi clearance to RW 08 at Innsbruck. I taxi to runway, line up. There are no options for take off, the speech remains on "clear to taxi runway 08 and let us know when ready". How do i get the program to advance. There are no more instructions to say on pressing "?". have the tower tuned there is no other frequency to use. I have loaded a flight plan from MSFS (the one I'm using). Everything is set, but I cant get past the taxi instructions. FYI, I'm in the Neo with the Flybywire mod on. But the Com radio does not change with the freqs from Pilot2ATC. I have disabled the two selections in the sim menu. Than…

Since the new update, the plane is on the map out of track.

I can't seem to get P2A to connect with my X-Plane 11 simulator. I downloaded and installed both the XPUIPC and the P2A software. When I open X-plane, I don't see it in the plugins. I did change the .imi file to the correct IP address for my computer. Any help with this is appreciated.

Are there any plans to implement Pilot2ATC in the new MS Flight Simulator. I love it in x-plane. Not sure if I could fly without it.

Hello, Wondering if the new TCAS options in X-Plane 11.50b9 open up Pilot2ATC and the ability for it to see aircraft created by plugins like LiveTraffic, World Traffic 3, and Traffic Global. I noticed that I can now see TCAS traffic on my ND without needing to add AI planes with the beta version of LiveTraffic that has been updated to use these new Datarefs, but Pilot2ATC doesn't seem to be able to see this traffic yet. Are there significant changes that need made to Pilot2ATC to adapt to the new TCAS datarefs, or is this something that is completely outside of what Pilot2ATC uses for seeing traffic? https://developer.x-plane.com/article/overriding-tcas-and-prov…

Hi, This is for share with you all my excitement that I've been able to make working Pilot2Atc with Flight Simulator 2020 thanks for the FSUIPC 7 free beta released today. You can take a look at this video I have streamed for testing purposses. I had to set Ignore Avionic switch on and just connect and go. English explanation in the video begins at 4:10 Cheers! Richard