PMDG 737NGX | 737NGXu

I have an interesting little issue, when programming the fmc if I set it at full fuel, full weight then setup the rest of the fmc it gives me v speeds of 104,104,122 okhowever if I then start again with 1/3 fuel and an empty plane it still reproduces the same v speeds which is surely not correct!upon further examination the full plane is showing a g/w and tow of 61.2 and at the empty setup initially i get the same weights if i then activate the qrh it gives me a g/w of 30.4 and a t/o of 61.2over to you guys!

Hey guys, first of all a huge thanks for the aircraft... I am having a great time with her and the plethora of customization is great! I know there is a lot on your plate right now, so just a FYI regarding the United repaint for the 900-WL; as you can see in the picture the landing lights cast the texture for a KLM aircraft (of which I have no KLM repaint installed). I will attempt to go through more repaints over the next few days and see if I can't find more anomalies and compile a list for you guys to take a look at once all the major bug fixes are done, this specific problem doesn't really affect me as I don't fly from the external view, but just thought I'd give a…

Guys, How do I assign things to my Saitek Hardware for the NGX, I cannot do it in the NGX..it only supports Keyboard assignment I think, can you help. I have FSUIPC, do I do it through there, it very complicated!Cheers

PMDG, I was wandering if we could have more info on the 600 and 700 varients, Seeing as previews of the 800-900 were released a year before release, would we be able to see any screenshots at all? All the best Alex

Any Chance to "update" ? normal panel SFP panel Made in Brazil, for me ! PMDG , any chance ?regards

Hi When will the product above be out for 737ngx? What version will you buy if you need the checklist? Best Fredrik

Just a question about the mechanics of the landing gear. As the wheel is exposed and there are no bay doors, I can see in the photo that the piece under the wing is fixed to the gear but what about the piece that fits around the fuselage. Is that a fixed piece or does it move into place to create a good fit against the body of the aircraft. Photo number 1905429 on Airliners.n Mark.

Hi everyone, First of all, thanks a million times to PMDG for this wonderful add-on ! I'm experiencing my first learning difficulty with the beast. I did not fly the 737 for 2 years or so, when I switched to FSX, and this masterpiece is far from the FS9 version regarding from the learning curve. I got hard times, and that is the good news . I left my confort zone of the MD11 and JS41 ... So, here are the problems I meet, and I think all may have the same reason: Route has been entered, T/O config and all FMC pages filled, triple checked. Flaps set, airbrake armed, brake RTO, trim set to FMC value. - when on ground, before lining_up: - I can't arm VNAV - LNAV, A/T an…

I'm getting really tired of seeing this. Anyone got any suggestions? I'm all out of ideas... Fault bucket 557280854, type 1Event Name: APPCRASHResponse: Not availableCab Id: 0 Problem signature:P1: fsx.exeP2: 10.0.61637.0P3: 46fadb14P4: g3d.dllP5: 10.0.61637.0P6: 46fadb58P7: c0000005P8: 000ba79fP9: P10: Attached files:C:\Users\Trey Akins\AppData\Roaming\Microsoft\FSX\fsx.CFG.txtC:\Users\Trey Akins\AppData\Roaming\Microsoft\FSX\dxdiag.txtC:\Users\Trey Akins\AppData\Roaming\Microsoft\FSX\scenery.cfgC:\Users\Trey Akins\AppData\Roaming\Microsoft\FSX\fdr.datC:\Users\Trey Akins\AppData\Roaming\Microsoft\FSX\dll.xmlC:\Users\Trey Akins\AppData\Local\Temp\WER7B3D.tmp.WERInternal…

Just for you who are trying to use the vrinsight mpanel with the ngx i've figured out something this morning. I had freezes all when the ngx reached acceleriation height. After one morning of trial and error I found a solution. Problem is with the default fsuipc dll. This one doesn't work well together with the ngx. Solution is to load the 744 dll instead of the fsuipc dll. You can change this in the mpanel.ini. Now, all works like a charme, only problem is the autopilot figures don't match the ones on the mpanel. Not a big problem for me, but I think this can't be solved without the sdk. Any questions about mpanel and ngx: feel free to ask. Costed me a lot of time to mak…

Well for the first time among 8 flights i managed to fly to EDDM tonight although not from the same departure without any memoryleak. Is it because of the Hotfix? Actually i have not have any OOM since Hotfix 2 I7@950 4,2HD5870 1GBSSD 128 Win 7 64300 GB Raptor FSX FSX, Autogen Extreme ,Weather 60nm but max clouds and 35% UI UT Traffic 2, NONE road traffic /Michael

HiI run a triple monitor setup with matrox th2go.I understand that I need to make some adjustments to the window size entries in thevpanel.cfg file because of this, however I can not get the lower main (shift 2) and window overhead (shift 6) to display.I click on these however I then get the flashing Mose cursor issue which kills fps.Can anyone assist?Thx

So yeah I've been reading up on the systems of the 737 a little bit (mainly from a technical side) and eventually I came across this: http://www.b737.org....tm#Hidden_Pages and well...I started wondering and just HAVE to ask here ARE those pages in the NGX? and if yes how can they be accessed? I'm really curious about that now and would appreciate if someone from the devs or tech team can shed some light on this awesome addon by the way! major kudos to PMDG for that! best regardsTobias Gruber

Enough said. BobIndianapolis

It was doing so well until hotfix 2 .... 18-26 fps and no freezes at all.Now with hotfix3 .... 5-8fps ..... 3 flights until now with the same results. Well ... i´ll stop with these "hot fixes" and wait for the sp1. It´s better.

Hello. I often have CTD when I use enbseries.So, please can someone confirm that enbseries work or not work without CTD?I tired many cfg for enbseries, but always CTD. thanks

Hi! I experienced a strange drop and rise in climb speed during climb. Sometimes it was 800 feet, then 1200 then back to lower values. Is this normal? Also I experienced during a descend that the plane went nose up and nose down during the whole descend, looked like in a rollercoster. Anyone had the same effect happen?

Hotfix 3 certainly seems to have cured the CTDs that I suffered after HF1. However the add-on is still very sensitive. I wrongly pressed Ctr+/ instead of Shift + / to arm the spoilers. The sim went into the Help centre but on clicking that away some very tortured textures came up and the sim was frozen. It took a power button close to finally shut it down. Second, I went into the map feature of MSFS in the middle of a flight, and the clicked 'cancel'. This time I got a coherent landscape, and aircraft noise but no aircraft. Using S and A changed nothing. However I was able to go back into Map and press OK and returned safely to to the aircraft and its interior and ex…

Hi. I Installed Hot Fix 3 but have come across a small problem. After pressing the SYS button I am getting no display for the Brake Temps,Hydraulics etc.I am able to switch the NAV Display and the Primary Engine Display to the Lower DU so it is working, but just cant get the Systems Section to display. Any help would be appreciated. Thanks Tony

A quick screenie of a recent approach into Hervey Bay in Aus...

Purchased the NGX on 8/19/2011 and cannot install your product on my machine...which has never happened to me before! I followed all instructions and get authorization failed repeatedly even with my anti-virus turned off completely and logging in as administrator. Even your text support (Trouble-shooting ticket) system seems to think I don't exist even after purchasing the product an hour earlier. The only thing I can think of causing this problem is my use of Chrome instead of IE. Also, this a US/English Installation Please contact me, you have my email address...Darryl Enault Invoice: 171236/ Customer: 66663

Is the VSD not working on the FO side? I looked in the documentation and couldn't find it. Sounds like a Dumb question but I'm getting the range circles on the FO side, but no terrain. CPT side works. Thanks,Benny Miller

There seems to be a list of things that do not get stored in panel states, and I am pretty sure a few of these were done so prior to the hot fixes. I hope to use the panel state save function to record the condition of the flight deck after I shut it down, and restore that next time I fly. MCP Heagind always goes back to 100MCP Speed always goes back to 100Radio Altimeter always goes back to 50XPndr always goes back to 1200The Nav and Comm frequencies are differentThe EFIS doesnt get saved (having airports or stations displayed) Some of these things may be how the real NGX behaves when it is shut down, but I could swear I remember the nav and comm frqencies stayed correc…

Hi Guys: I still have a problem with the ngx following the designated spd/alt in the fmc legs pages are these only reference or is there a setting in the fmc I should be activating ? also can they be changed at will during the flight ? thank you.

Hi I am trying to use http://fuel.aerotexas.com/ to plan my flights...The function that you get a random payload with passengers and such is very good I think but i need some help interpreting the information so I can load my NGX properly...<pre> WEIGHT DISTRIBUTIONLOAD IN COMPARTMENTS 001584 B116/13PASSENGER/CABIN BAG 010968 Y124/88For example...What does B116/13 mean when it comes to load in compartments?</pre>and what does Passenger/Cabinbag Y124/88 mean?Does it mean that there are 124 passengers and total of 88 bags?or what does it mean?:-)And what are the fuel i need to fill me plane with?is it the figures presented at "Take o…