PMDG 737NGX | 737NGXu

Hi there, I know you are working on it, and I really appreciate it. I am one of the few guys that hasn't been able to activate the product, after almost 12 days it came out. I have a Win7 64 bits in Spanish. I enter the code, it says product activated and then the activation window appears again, and again, and again. Last update on this matter is from Saturday... and you said that we had to wait until monday to know something. Any news at all? Thanks for your help.

After installation of hotfix#1 no more panel freeze but very strange behaviour of the aircraft. After setup en flying the EHAM -EGGL route a/c didn't follow the computed nav-track in the LNAV mode and A/P engaged. Also a strong and heavy reaction in the column (up/down). After selecting form LNAV to HDG the a/c goes there own way and makes very strange left and right roll movements.My passengers don't like this and use there sick bags for this rollercoaster flight.After the installation of the latest hotfix, again panel freeze after A/C setup and a short flight. Onle the sceney is moving and the A/C follow the latest heading.All my other FSX A/C working fine for example L…

Hello fellowsimmers, when I open a second view in FSX, I meet one or several of the following issues: . temporary engine power loss, then the engine re-starts but with too much power (the gauge turns red) . temporary graphics corrupt . permanent freeze of either or both the panel and the FMC I installed the hotfix and it is worse, everything freezed during take off, even the speed gauge. Has anybody encountered these issues ? Thanks

hello,this is a stupid question but where do we locate the PMDG 737NGX. I have tried to locate it to c:/ programfiles/microsoftgames/flightsimulatorx/simobjects/aircraftbut I get error messages. I could not exactly understand what it said in the readme. Where do I locate it to?Thanks and sorry for this, I feel pretty daft

4997 hours! I think the plane will have crashed by then. I'm in the middle of doing a flight now and it jumped from being just under 250 to just under 5000 hours in the space of about an hours flight time. Anyone else experienced this? Any cfg fix available?

When I manually enter my flight in this case from kbwi to ksdf i select a runway then sid and i get 2 blue hashes on the display once the flightplan is entered i have my route ant then a seperate magenta line from the departure runway like theres 2 flight plans loaded any ideas?

I had a topic that was a flow/ Check list from Cold and Dark to secure. It was DL 1400 timesBecause one person posted on something better not talked about and was not even on topic you left fit to delete the topic?Why not delete his replies and keep a very used helpful file available up for more people to use. Why O why ??

I have flown the NGX on multiple flights with no problems, but on my latest flight, the cursor acted a bit funky. It would change from the classic arrow to the knob hand and secondary knob hand and back many times a second. I searched around and saw that others had this problem as well. Any ideas?

Hello, I am certain of service as yours is unique, you are always active and available to listen, congratulations

Hello everyone, I bought the NGX yesterday and installed two Dutch liveries (Transavia/KLM).Though in the engine intake, the fan blades are way too thin and the spiral thingy at the start of the intake is missing as well, anyone else got this problem?Sorry that I didn't attach any images, every time I try it says "Error No file was selected for upload". Any suggestions?

Hi, First of all, i want to congratulate the PMDG team for that master piece. I've installed the latest hotfix and i have no longer freeze so far. The only problem i have is with the autopilot in heading mode. The A/P can follow the heading, it goes from 10 degrees left to 10 right. I use REX and ASE . I've already had this problem with another PMDG aircraft but i can't remember what i did to resolve it. Many thanks and best regards.

In flight, I disengaged both FDs and then the A/P with the button on the control wheel. However, VNAV PTH still continued to be annunciated on the PFD, the VNAV button was illuminated on the MCP and the vertical VNAV scale was also in view. The roll mode was blank. I realize that the AFDS on the NGX is a little different from the other Boeings, but is it normal to have an FMA annunciation on the PFD and the VNAV MCP light illuminated when neither FD nor the A/P is engaged? Could not find any information on this in the provided manuals. Thanks! Rushad Ed.

Hello, During a flight with the 737 (http://www.flightsim...howtopic=196814), I realized that I had a visuel problem with the NGX, The slats is not visible on the outside model. Screens : I have uninstal and re-instal, but the problems is always present. Have you a solution? Thank you in advance

Hello,In the FCOMv2 on page 221 there is :"TBC4.20.9 Pitch CWS with a CMD Engage Switch Selected The pitch axis engages in CWS while the roll axis is in CMD when: -a command pitch mode has not been selected or was deselected -A/P pitch has been manually overridden with control column force. The force required for override is greater than normal CWS control column force." and below : "If pitch is manually overridden while in ALT HOLD at the selected altitude, ALT HOLD changes to CWS P. If control force is released within 250 feet of the selected altitude, CWS P changes to ALT ACQ, the airplane returns to the selected al…

I downloaded a flight plan from simroutes and saved it in the FSX format then used an app called PLN2RTE101 to convert to RTE format to be loaded into the 737NGX FMS, seemed to go in ok but could not get any QRH Vref speeds to calculate so gave in, must be an incompatibility, better invest in FS Commander or something to build some flight plans, anybody know of any sites out there where you can down load compatable flight plans to be loaded straight into the FMC, thanks RegardsWayne

Sometimes when after i land, i cant brake after turning off autobrake and using manual braking! very frustrating

Hello Just curious if the PMDG 737 NGX has reverse route functionality so when you arive at the destination you can simply reverse the route and fly the reciprocal flight plan RegardsWayne

Disregard.

Once again, I think PMDG has broke the mold on this one. I love the way the aircraft handles. Matched with my PFC yoke, she has that real world feel. When I'm hand flying and using my track ir,it reminds me of my real world quarterly refresher sims. The systems model leaves me speechless. After flying it initially and reading some posts, I felt that the NGX performs as if it is a tad bit fast on approach and landing. I felt as though she had just a little much lift and idle thrust in the flare. After watching a youtube video of a landing at St Barths, based on the pitch I figured the guy should have stalled. So i decided to do some stall tests. I chose some random weights…

Hi. I have installed the new hot fix. Tonight I had a weird thing happen after I returned from looking at the map. The scenary was still there, so was the sound but no aircraft. I did click to an outside view but in panning I had multiple aircraft appear. I clicked to a wing view, saw the wing but also saw what what I was looking at previous. Flight sim was still running so exited from it. It may well boil down to my Ati 4850 card with 512 meg ram. Also I may not have the best driver for it. The flight I was running was a flight I saved from last night, it was started in mid flight, just incase that is an issue. The other odd thing I noticed which has happened twice is th…

I installed the hotfix but for some reason i did not delete the installed liveries before doing so (maybe i was half asleep :(), now im getting this error when installing liveries, saying they are already installed when they arn't, does this mean i have to reinstall the NGX?Nick

Hello, can anyone share some information on how to determine the Cost Index and what value should be entered into the FMC. Thanks !!! ******* H

I have noticed that the downloadable liveries have no HUD?Is this the way of the world or my errant way? allen

Hi! Can someone please explain what it means, when the lamps "Zone Temp" illuminate on the overhead panel? I set everything to Auto and the packs are one etc. Is there something I am not getting? Thanks in advance!

When can we buy the boxed edition?Thanks