PMDG 737NGX | 737NGXu

For some reason I have begun hearing an alarm about 20-30 minutes into flights. It never used to happen, so unsure why all of a sudden it has appeared. It happens with and without FS2Crew installed. It's also happening following a fresh install of both P3DV4.5 and the NGX. I have checked most things, including service hatch and doors. I'm sure it's something simple, but for the life of me I can't figure it out. Any help appreciated...

When activating DEP/ARR there is an option DEP OTHER ARR ( at the bottom ) I try to figure out what the purpose is and how to use them ? Thank you Paul12

I' am wondering if there is any way that shows descriptions of each bottoms of the instrument panel by placing the cursor on top of the bottom? help is always appreciated

I try to figure out how to divert a flight.Suppose I fly from Zurich to Geneva ( using the P<DG-737 ) and then I decide to go to another airport.What do I have to do.I am now trying since houers, without success. Thank you Paul12

Hello, I want to merge my PMDG 737 (the cockpit) with my default 737-800 and the 737 Classic base pack (cockpit either), tried it with the 737 CL but it didn't go on how I wanted it. So Can anyone help me with that?

Hi, any advise please, why the DOME WHITE, Dim or Bright switch (overhead panel) lights doesn’t work? No light at all either on Dim or Bright. Please Help Georgios

Can anyone tell me why the PMDG 737 NGX parking brake keeps releasing itselft at the end of the pushback

Hello, I’ve been researching everything with this issue and no luck. I can faintly hear my engines in VC until I zoom out, or pan to the rear. I have made sure I have nothing set to surround sound in my computer control panel and RealTek application. This issue seemed to have started when I updated to Windows 10 1903. I installed a new video card around the same time so I can’t rule that out either. I’m running 3 screens as well and have disabled sound from those. This is getting really annoying too.

Howdy howdy,Looking into getting into some American operations here, planning a jaunt to Anchorage from Seattle in the -900...as I've never flown that variant yet...he he.Does anyone have any dirt on what equipment/options Alaska operates on thier NG's? Particulary the -900?Any tips for the -900? To me it look's like i'll be flying a underpowered 757 with no landing gear ;)

Why am I getting the following message when I start or stop FSX using the PMDG 737 NGX even though I am running as administrator? "PMDG Product unable to create its work files. Please make sure you are running FSX as administrator"

Hi,This is the first time I've had a problem system-wise with the NGX. I've switched VC configs, clicked the SPD INTV button, flipped AT on and off, as well as both FD switches, and still can't get a ligh to show under the VNAV button. I thought maybe I didn't have VNAV installed in the aircraft I was flying, the PMDG Southwest paint for the 700WL, but that wasn't it.Any Help? or just reinstall?

Hey guys, I'm losing the ability to click on anything in the virtual cockpit. I'm able to click them on the ground (sometimes) but when I'm flying, I lose the ability to click anything. I already know about re-positioning the camera to a closer view, but that won't do anything. Any help would be great. Thanks! -- Anthony Polomaine

Hello, I wanted to know if it is possible to add a virtual cabin into my PMDG 737 NGX? And also that there are engines under the wings in VC?

Hi If you have read my last post. You can see that I am building a cockpit panel, own design. The cockpit and it´s function are firstly based on B737 😊 My all components are control by a several Arduino boards and Phidget for my led-Lights. I am programming it in Javascript together with Node JS server wish will handle the connection through FSUIPC. I have a main software as PMDG 737ngx for P3D 4. I think it will work but a thing to sorts out. 2) Both the PFD and the ND must be able showing in a separate monitors the FMC too, I think it can be done with 2D panels?. 3) Must be able sending the the output values to a external hardware like …

Hi all was wondering if anyone would be able to help with the issue for the 737 NGX FSX SE 600/700 & 800/900. Lately the mouse has intermittenly stop working in VC, this would happen randomly but not on all flights. I opened a ticket with PMDG Helpdesk and they suggested uninstalling and re-installing the new version, this seem to work for one flight and then the issue came back again. Also what happens occasionally is only one engine powering up and the other will just idle and sometimes the throttles won't work at all. I have tried a few things such as different eyepoint in VC, updating windows 10, turn off other addons and not use any controls at all whilst ai…

Hi guys, I need your help immediatelly. I use boeing pmdg 737ngx for a long time. I have sp1d update. After takeoff i press ''g'' to command gear up, but after i press that all panels, displays ,buttons and yoke freeze at that time. You know how terrible it is. I start my aircraft from cold and dark then configure it about for 30 minutes than it freezes. I also use PMDG777(SP1D) it works perfectly. Please help me.I don't know what to do. I used it for long time and i miss my 737.

It freezes for a second whenever i start an engine (both when i select GRD and then when i set the fuel levers to idle) By the way my specs are: I5-7400 @3.0GHz (Quad) 16GB RAM GTX 1060 6GB OC

Hello ! I had a problem recently after reinstalling my P3D v4 with the pmdg 737 ngx and the pmdg 777 and the problem is that neither the 737 nor the 777 are illuminating landing lights and strobe lights in the ground ! The cockpit lights are working well but there is no lights illuminating on the ground or illuminating on the plane . I have P3d v4 Dell inspiron 5577 Gaming laptop with intel core i7 7th gen Nvidia Geforce GTX 1050 2gb 16gb Ram Please help me get my lights back :(

Hi, using dynamic lights in p3d. The Dynamic lights is selected in the p3d lights menu, with no problem in performance as long as at the apron. Taxiing to the runway and as long as the landing lights are off no problem FPS 30-35 with PMDG 737 NGX. Turning ON lights for take off FPS drops to 10-14 FPS Any advise please? Any help? Giorgos

I have a problem, I buy the 737 NGX expansion pack. I start the configuration and install the aircraft normally, but when I launch FSX and I select the 737 600 or 700 for activation, I can't activate the key and it sends me a ERROR message, please check your connection and try again " I'm going to support PMDG but the page doesn't working. Can you help me?

Does this problem repeat for everyone? The arch(go aruond phase) is incorrectly drawn, but what’s more interesting is that point WI008 is not in the FMC ACT RTE LEGS, but nevertheless this point is in Navigation Display... AIRAC 1908, LOWI RNP 26... Spoiler

Hello: I reinstalled FSX and the PMDG-737 .When opening the program I get a message: Application failed because side by side configuration is incorrect, Can any body provide a hint what this means ? Thank you Paul12

On the ground, nav/comms work fine. When in flight for about 15 minutes navs and comms are not able to to take frequency changes.

I am not done with everything. I saw a Topic in here but nothing updated there. I am doing that myself. If someone got good Pictures of Real Life B737, that would be awesome! I am starting with the Lower here. Then CDU then Upper and last one will be MCP and Throttle. It is not that easy to edit everything. I also want to create clean Gauges. But the Spec. is not really easy. I will keep you updated.!

Hello, P3D is working fine but only whithout PMDG planes. As soon as we install (yes fresh and clean!) a pPMDG Plane (we have 737, 777, 747) we get by start : "P3D has stopped working...." After delating "Generated files"in the best case , P3D works again 5/5. We have tried quite all the usual medics with no change. Could it be a problem with the files in the registry??? Please helpifyouu can!!! Thanks and regards Daniel Kittler / Cyberavia