ChasePlane Support

I've noticed that since I did a clean install of my PC and reinstalled Chaseplane that every time I use mouselook the camera will out of nowhere get pointed down towards the pilot seat which needless to say is very annoying, what is the best way to get rid of this?

Hello, i am having issues with chaseplane at the moment it won't connect to my sim I run p3d 3.4 I load p3d up and cp is running but not connected and before this issue it would connect but I wouldn't be able to use the interface but I could still use my views by pressing my Num pad. I am on the stable version I have tried installing and reinstalling still nothing any ideas ?

Hello. I've got problem lately that FSL A320 / Aerosoft CRJ for P3Dv4's cockpit flood lighting don't work with chaseplane. In other words, it still works well with stock cockpit view. I prefer self-service, so reinstalled, turned HDR override off, removed FSLSpotlight, resetted Nvidia inspector setting and all of them don't work (It's working when Dynamic lighting off, but then no PMDG landing light :( ) If there's any solution please help me :) Thanks.

Hi guys, Since I have installed the FSLabs A320 for P3Dv4, even with the latest update I have an issue with Chaseplane. Meaning I can Switch around through the various presets and can also use the Toggle Switch, but aftere about 30-40 min Chaseplane gets stuck and no further use is possible. If I Exit Chaseplane and Launch it again I can`t even see my presets and it`s not working and I don`t know why!?!? Help would be very much appreciated! Thanx in advance! Robert

I can not for the life of me figure out why I can't change the onboard cameras with the controls, I can change the outside cameras with no problems. PLEASE HELP!

Just tried to run CP and it won't come up. Are the servers down again? I don't usually have a lot of time to fly but when I want to I'd really like CP to work, so now I guess I wait.

I redownload chaseplane on my new computer from my old and is said i used max uses on this acc please help sent email dont answer

Hi, I use ChasePlane in FSX and P3Dv3 and v4 and have in all sims the same issue. ChasePlane is started by starting the sim, TrackIR is started also (default by starting my PC) Everething seems to work properly, pauzing/unpauzing TrackIR, centerfunction TrackIR etc..., but after a while (a few minutes or so) TrackIR will no more unpauze while it does in it's one UI. restarting ChasePlane wil resolve the problem but it comes back after some minutes. It's like TrackIR lose contact with ChasePlane .... ? at the moment i use ChasePlane v0.3.29 Beta, YtackIR 5.4.2.27545 in C:\Program Files (x86)\NaturalPoint\TrackIR5 i see the files simconne…

As much as I love ChasePlane and it's features, and I really do, what is sending me crazy is the continual need to stop and restart the Program. It refuses to change view via hot keys so you have to bring up the UI and click on each preset. Or...you stop and restart to reset it. At a guess I would say this is when it tries to contact it's home base and for whatever reason it doesn't get the responce it expects, or my net provider drops a few packets, which is enough to trigger this behaviour. If this is the reason could you please extend the time out, if it's this simple. Course, I'm probably very wrong :) Re-starting ChasePlane six or seven times over a 2 hour f…

Hi Folks, RE: 3.166 Beta Unable to contact server - known issue ? Obviously my Internet is up as I am typing this on same connection... Thanks... Regards, Scott

In the CP outside view only, NDB tower heights get exaggerated. If I disable CP and goto the standard Spot view the towers return to normal heights. I believe this issue is introduced in more recent CP updates, but not sure which build. Here's a video (unlisted) showing the problem with CP enabled/disabled and spot view: Cheers, Rob.

When I try to use my mouse to get closer to dials and such in the PMDG DC-6, they turn blurry and are unreadable. This happens all over the cockpit and only with this aircraft. I have also asked at the PMDG forum.

This may not be a feature that is implemented yet, but I thought I would ask anyways I enjoy holding the space bar down to look around the virtual cabin and zooming in with the mouse scroll wheel. When I try to do so (in this case, the FSLabs A320), I find that zooming in will turn dials and knobs on the flight deck while my mouse is pointed over the particular control. Is there any way to temporarily disable unintentionally activating knobs or switches while zooming in with Chase Plane? Thank you.

Update: FIXED 22.10.2017 ------------------------------------------------------------- Hello there I have been searching on the one to one forum for sometime today and can not find any answer to what is happening on my sim today. Maybe there is and my eyes need checking. So the situation i have is as follow: I load P3D up, select the particular aircraft I want. I.E. PMDG 737, the sim loads fine. The aircraft loads fine. But none of the buttons are working within the aircraft. So for example if I click the auto throttle the button. You can see that the button has worked but the actual switch can not be seen moving within the aircraft. The same…

Hi all, I've been using ChasePlane since it came out and I love it! It has some bugs but most have been ironed out in the updates. But now I have a different problem! It doesn't even launch!!!!!!!! Every time I try to launch it I get this message: "It looks like something unexpected occurred. A log has been saved on your Desktop. Please send it to ***@***.com. Sorry for the inconvenience." and the log says this: Time (UTC): 5/18/2017 7:00:57 PM Launch (s): 0.4300697 OS: Microsoft Windows 10 Home Sim: No running sim Version: 0.2.36.0 .NET Framework: 4.6 RC or later Nav: No active nav…

Recently I started flying in VR with an Oculus Rift headset and use the native VR P3Dv4.1 capabilities. I am really enjoying the experience now that I have figured out the optimal settings for my rig through a great deal of trial and error. One of the things I love about VR in P3Dv4 is that Chase Plane still functions and I can set up "zoomed" in views to toggle between to better read my gages etc... Also I love the external views in VR ! One problem I have come across is that I tend to want to change the positioning of the views in VR to optimize them but when I disable VR and go back to 2D monitor flying my profile views are not correct anymore for the 2D view. …

Trying to join the beta team. When I click on "join beta" nothing happens? Browser issue or is it closed?

Hi guys. I started using TrackIR again over using my Rift because of ease of function when it came to dialing in numbers on the dials etc. But i have this issue where when TrackIR is active the screen/cockpit starts flashing. If i turn off TrackIR or chaseplane the flashing stops. Any ideas please? Regards Mike

Hi everyone, I just purchased chase plane, paid thru paypal ($39.00) and got not serial No. , no download software link, and no purchase confirmation email other than the paypal transaction email. Can anyone tell me what should I do next, please? Thanks, R. George Balzaretti

Does anyone know why this is happening and is there a fix? https://gyazo.com/3fc9c4794d8151173cc474b4bfae0a6f

Hi! After using chaseplane, I can look around with space + mouse, but it will go back to default saved position. Is it possible to make so you can stay at your viewed position like before?

So after my purchase, I can't even install chaseplane.... I try now for almost a hour tho get it working and i'm tired about things like this! VFXCentral hangs at 6% update for ever ..... and after this experience I get a install error of chaseplane! I try tomorrow again, for now back to the other cam programm. Bruno

I have post this problem some weeks ago. The mouse cursor is still present when pan around. Max

Hello, I'm a new chaseplane customer and I'm quite impressed, I've been able to finally replace OPUS FSX for my camera management. One issue I'm having is that before using chaseplane I could hit shift-s to back up one camera view to my wingviews. Now when I do this it changes to Tower-view instead. I'm guessing it's because additional camera definitions have been created. Any way to fix this?

Hi, i discovered when trying to add new static cams as new tower position or so, the tracked airplane is stuttering, jumping around. The same problem occurs when not tracking the airplane, i made a short video to demonstrate the problem. Btw. i use Prepar3D v4. Left original Tower Cam, Right the Chase Plane static cam ( i positioned it close to the original tower just as an example) Is there any help here??