ChasePlane Support

I'm using version 0.4.46, but I'm not seeing any way to assign the 'hot corners'. Also, I'm not completely sure I understand what they do. I assume you assign a view to one of the corners, then move your mouse to the corners and click to activate that particular view? Anyway, I couldn't really find any explanation...thanks any help you can provide.

Hi Keven, I noticed the Browse menu for community presets is now greyed out in 0.4.51 is this just a temporary thing? Also haven't been able to search for any community presets for the past couple of hours (on and off!) Cheers, Neil

HI! It is possible to use POV on joy as view ext/int camera? Like in Outside Spot view mode (S key) I have latest exp version of CP Cheers

Hi all, the new version should fix the issue that changing cameras "disables" MJ sounds until you click in the sim. Now i have the following issue; I was in my VC - then started the APU - changed to the outside view - gone back inside and now all the sounds of MJ are gone and i only hear the GSX vehicles and the APU outside sound. I'm nearly sure that isn't the way it should be so how to fix?

Hello, I remain amazed and impressed by the continuous development of Chase Plane. An issue that I've had with FSX/P3D in general in inadvertent selection of the Context Menu, which shows a pop up menu containing Cockpit, Outside, ... when I right click the screen. This is pronounced in complex aircraft that use the right mouse button to interact with controls. Is there a way to disable the right mouse button from launching the Context menu, either with a setting in P3D/FSX or as a feature in ChasePlane? I thought I saw this enabled in an early alpha of CP, but I haven't been able to find it in quite a while. Thank you, Craig

Hello FSFX Packages team. I first installed ChasePlane and updated to v 0.4.43. After updating, the starting of ChasePlane will stop at "Loading Preferences ...". Waiting for few hours, but does not continue to next. I tried reinstalling several times. However, the same symptoms occur. Please tell me the procedure to start up properly. Thank you.

Hi guys, I have a problem with my chaseplane and need your help. First after the latest update, my preset ground motion effect was not working. There is no ground effect at all. So I decided to reinstall it. However once I un-install the product and would like to direct install it again, the VFR Central give me this error : Installation Error: System.Exception: cpDownloadError at A.c.A(Boolean ) at VFXCentral.MainWindow.A(Object , DoWorkEventArgs ) at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) Could you help why I can not download it? Tha…

Hi, updated to the new V0.4 this morning, great perfomance increase! Now I am having problems with the effects; All of them seem to be working fine, except for the environmental ground effect which seems to be completly absent. Tried pegging the slider to the max, no success. ( There is not even the little green bar displaying intensity, at any given slider setting) So the camera just sits still when moving on the ground.. Any help would be appreciated Cheers!

Hi Keven, Just throwing out a thought - what about interactive checklists as a new feature of ChasePlane ? Happened to be watching a video review on Goran's beautiful XP Saab last night - which the developer appears to have included just that... It seems like a perfect meld with ChasePlane's current niche for the FSX/P3D crowd - for both custom ones created by users - or canned ones provided by the developer during initial distribution... As you select each item on the checklist the camera automatically slews to the correct view - with a zoom close enough to actually read the labeling... It would GREATLY speed the learning curve associated with new complex aircraft..…

I had a very small window to test the replay system last night. Loved the smoothness of the replay, but i had the following issues. I pushed back at Gatwick, started, taxi'd out and took off, did a right turn onto a downwind leg and then replayed the scenario. Replay put me back at the gate with engines off, but i had a whole lot of audible warnings going off. Probably understandable. There was also a persistent looping sound (hard to describe what it was) but it persisted throughout the taxi and take-off ground phase. Assume it was undercarriage related. Aircraft lights didn't seem to be recorded (all lights were off during the playback.). As I say, …

I'm afraid to fire up P3D and have ChasePlane update on me. From reading some of the post there appears to be a few bugs with this latest release. Anyone not having issues?

Just checking out the 0.4 update and *with my version*, it's skipping the external camera after pressing 'S' from the virtual cockpit. It skips directly to the nearest tower view. This seems to be happening with all aircraft.

New update - Chaseplane is not finding any deafult static cams from the airport afcads. I've tried rescanning and it crashes with an error at 96%

Hey guys I tried to startr chaseplane this morning. Both chaseplane and vfx central give me a WMI error. What gives? Any help would be appreciated. Lon Duncombe

Latest ver. CP. Key "S" next category in P3D4 switch to tower view ommiting Outside view. In Outside view I have 7 cameras (attachment) https://imgur.com/a/3HjRm BTW Thanx for nice addon!

Unable to use the replay feature without chaseplane crashing to the desktop. This is with the FSlabs Bus. Not tried it with other aircraft yet. I'm aware it is very much a work in progress. Just thought I'd give you a heads up

ever wanted to celebrate successful landings in style? check the hot corner actions... ;)

Absolutely love this feature. Can't get the bottom central location to work though. Anyone else?

Hi, All was well until I activated the experimental option. When it restarted I got an error "There was an error initializing chaseplane...". It then closes. I have uninstalled many times but same issue. I cannot get into the program to turn off the experimental option so its pretty much broken. What should I do?

I didn't want to hijack Max's thread so here goes. I use S - View (Next Category) and A - (Next in Current Category) A LOT. They're even assigned to buttons on my Saitek yoke. But I'm seeing some very odd behavior here in this latest version. I use S to go to View, then A to Spot, A again to Locked Spot, then A again to go to FyBy, then A yet again to go to Top-Down. This no longer works unless I manually go to the P3D4.1's View menus and choose spot, then I can cycle through the views. BUT, the minute I choose a predefined CP view I had already set up, my familiar S & A setup no longer works. Here's my notes I took just now in A2A's 182 as a te…

Hey all, I bought Chaseplane yesterday because I heard about the new features coming out and was super excited. However, since I installed it the program has totally wrecked my sim I had just gotten v4.1 to a point where it would look good and run well. But now with Chaseplane it either 1) drops the FPS so low that you can't do anything, or 2) makes it so that my textures take forever to load and makes my autogen draw distance drop so low it looks like I'm constantly flying in a fog. In addition, while I was able to pan normally with my joystick hat switch when I first installed it, I suddenly can't move the chaseplane cameras at all after last night (not with arrow…

A few months ago I asked in this forum whether or not Chaseplane would have VR support. The answer was that it is planned after release. On the product page there is an overview over planned features, and VR support is not on the list. Why?

Nice update guys, I haven't tried Replay yet but the camera motion is alot more fluid, and the response seems really quick. Now a question regarding saving presets, are the automatically saved in the installation directory, or do we have to choose a location, for the camera profiles? Again, really nice work!

Hello I still got ChasePlane 0.3.70 When is possible to see update to 0.4?

I asked what I needed to get for a 2nd license for a 2nd desktop PC on another thread, but it didn't go anywhere. I signed into FSFX under the email/pw that I used to install CP on PC1. Using the same email/pw I cannot purchase a second license. So the question is, do I have to have a second email account setup so that it will tie a second license to my PC2?? Thanks!!