Pilot2ATC Bug Reporting Forum

Hi, where I can get cycle 1705 for x plane? My version still is 1610, so there are problems by importing the flight plan into the fmc.

I am testing Pilot2ATC with Xplane 11 on a windows 10 i7 7700, 32gb ream, GTX-1080i-11gb and can not get the program to recognize voice commands. Microphone is properly setup in Windows and works everywhere else. It did work once before the program crashed. I am also getting a repeating bug during the descent, either I get the same approach instruction over and over in a loop or the program simply crashes. I have also added the X-chatter files and they work great. Looking forward to purchasing if I can use the voice commands and I can actually land with ATC. Furthermore, testing the PTT in the grammar help crashes the program. I read that your next update has ad…

I have been using 2.4 for a few months and everything worked fine, normally i create a flightplan outside of P3DV4.2 and import it into the sim via the flight planner button, this works fine for me. I updated to 2.5.0.1 today and although i can create a flight plan either with auto plan or manually adding sids and stars and the approach and exporting that plan to my P3DV4 folder, when it comes time to import than flight plan via the flight planner in P3DV4.2 it does not do anything, I tried one of the earlier flight plans i made in 2.4 and they load perfectly. I also tried building my flight plan again using the tip "Force Pilot Runway Selection" from the other thre…

Just a quick question, Stock out of the box xplane 11 airport KPVD. flew here with pilot2ATC and it worked great. Got the to airport, selected "Info" and saw that the realworld cargo ramps was called 'Park15'. There are a series of this type at the airport. I requested to taxi to 'park15' and got no response. Requested '15' and got issued instructions to the small gate. Can it only be a number? or a single letter with a number? Question: what is the logic used for P2A to recognize a gate/ramp? Thanks

I had the chance to fly a couple of flights with the latest version, 2.5.0.1 and have had no problems other than runway incursions while I'm on approach. I'm using Ultimate Traffic Live for AI so I don't know if P2A doesn't see it. On both flights, I was with 1 mile of the runway when traffic pulled out in front of me.

Hi Dave, I just re-initialized my PC running P2A V2.4.0.5. The PC also has Prosim (cockpit) installed. All other flight sim apps including P3DV4 are on another PC. I am using voice commands and find that the ATC Chatter will talk over the top of me when I am transmitting on either comm or even listening to ATIS. This never used to happen and I believe it started with the 64bit version. Has anyone else reported this? Best regards Rob

Hi there, i am in the trial stages of Pilot2Atc and mostly going ok. The problem im having is when calling Atc from my local airports YMLT or YMHB i get green text ok, but never a response. I do get a response if i dont speak correctly, advising so but i can not get a response to taxi or ifr clearance. If i try at a larger airport like YMML it works fine. Am i missing something or has the software not been developed for all airports? I can hear chatter of other aircraft at YMLT so i believe im tuned correctly. Thanks

Hi Dave, I recently bought the Aerosoft Frankfurt EDDF and did my first flights. All went well during LSGG-EDDF, but on the return flight, P2A stopped responding when I asked for taxi clearance. I was ablke to ask for IFR and pushback clearance, but after asking for taxi clearance, nothing happend. I could ask whatever I wanted, P2A just stayed unresponsive. The PTT key was working (it became green), but I did not have the "ding" saying that a command was recognized. I continued my flight anyway, but at no time P2A came alive again. I tried a second time and had exactly the same behaviour. I don't know if this is a bug or a problem with the taxi maintenenan…

Hello! With version 2.5. I more often get no descent instructions by the ATC when I reach the TOD waypoint. Also the descent announcement is missing. If I descent anyway, ATC tells me again and again to stay at cruise altitude and I get no other instructons until I reach the destination airport. There is no matter from which or to which airport. .

Hello Dave, I finally had time to check out version 2.5 x64 and I encountered the following issues: 1) When connecting to the sim and the battery switch and master avionics switch is off, the atis starts playing (the pwr indicator is red). When I turn the switches on and off the atis message stops. 2) I tried to make a short test flight from EHAM, created a flight plan with rwy24 as the takeof runway. and everything went ok until the taxi clearance. The taxi clearance itself was ok but when I looked on the map and selected the taxi button to show the taxi route it gave me a route to the middle of rwy 36L. I started taxi maintenance and I placed the airc…

Hello Dave, Just started a fllght between New York and Frankfurt (KJFK-EDDF) and it seems to be a recognised problem only for the transatlantic waypoint. I send you my logfile via e-mail in a few minutes.

Hi Dave, I noticed last week that I don't get charts anymore when I click on the TERPS button and enter the ICAO. It says No Charts Found. I tried uninstalling and reinstalling but no luck. It used to work. I'm on the latest _c version. Thanks.

Dave( admin) I am not reporting a bug. ). Just a request for clarification and help. I am migrating from FSX steam to Prepare3D V4 How do i get P2A re-connected to aircraft location in Prepare3dV4. . I would also like to retain the sounds (atc voices.) Do I need another purchase?. i am not planning on running FSX Best Regards hari

Hi Dave I really enjoy Pilot2ATC, I fly on XP11 using Zibo 737 in VR. It would be more immersive to use the Mic button on the top left of the 737 VR cockpit as PTT. In P2ATC setting I can assign keyboard or joystick only. I already talked to to developer of the aircraft and he asked if you have a command for the PTT. If this didn't work, can we map any button on the VR controller to do that? Thanks in advance

Hello Dave, I've updated from Version 2.4.0.5 directly to V2.4.0.6_b. When starting the program it "pauses" at 90% for quite some time. Then an exception is displayed). When accepting the exception notification, the program starts and seems to be usable. I tried to install a full version V.2.4.0.6_b, too. The error is the same. Any help is appreciated: Here's the logfile: Program StartedPilot 2 ATC (P2A) - version 2.4.0.6_x64_b 03/04/2018 18:45:53 Error in FlightDate Init System.Data.Entity.Core.EntityCommandExecutionException: An error occurred while executing the command definition. See the inner exception for details. ---> System.Data.SqlCli…

as it says above, i cannot get p2a to listen to me, i just get the green full txt when trying to speak. nothing responds. all my system is set up correctly, ive been through every forum post about but it will not work. i'm out of ideas

Hello, really enjoyed the trial version and decided to purchase, still learning, however, really increased the immersion factor for me. Is there a preferred way to ask for a deviation around weather while en-route? Is this even an option? Thanks, Bruce Looks like i posted this in the bug forum instead of the users forum,sorry

Hi Everyone, I saw the Hotfix for Version 2.4.0.6_x64_b Update. The version I had was Version 2.4.0.5_x64. I looked for Version 2.4.0.6_x64 in order to Download it but could not find it. So I downloaded the Hotfix Version 2.4.0.6_x64_b Hoping everything would be in the one download. After I installed it and launched it I realized it wasn't. There was a blank screen. I made sure it was installed in the folder that I always installed it too. Anyway, any help would be appreciated in solving my problem of the missing blank screen. Thanks in advance Harry

I just started with Pilot2ATC. After a couple simpler flights, I tried a short flight through Las Vegas bravo airspace, and got confusing results. I never got cleared into bravo and basically ATC stopped responding after I entered anyway. No fighter jets were scrambled (as far as I know). It could easily be my error, but should I expect Pilot2ATC to handle bravo airspace?

Dave, I had 2.4.0.5 with navigraph install. I have the latest navigraph 1802 airac installed (not sure if that matters here). I just ran the update installer (not the full installer) to upgrade to 2.4.0.6. When the app launches now, i have no map. Nothing i do shows the map. screen shot below. the logs are clean, but I pasted in the log from the startup anyway for you. https://photos.app.goo.gl/OmBTRVYlsnRvXhpo1 Startup Log: Program StartedPilot 2 ATC (P2A) - version 2.4.0.6_x64 02/26/2018 14:11:32 Application frmP2AMain starting 02/26/2018 14:12:06 Loading Form Main form opened: Pilot2ATC 2018 v. 2.4.0.6_x64 Navigraph - AIRAC cycle…

I've installed P2A 2.2.1.4 and updated navdata with NavDataPro cycle 1706. P2A refuses to open the database and shows the following error: "Unable to initialize Database. The underlying provider failed to Open. Cannot open database: C:\PILOT2ATC_200\DATA\P2ADYNAMICDATA.MDF requested by the login. The login failed. Login failed for user 'DesktopPC\Paweł'. Any ideas?

Nothing major but something I'd hope you can fix next time around. Sometimes ATc will tell me to contact the local tower saying contact Tower "underscore" at 118.2. Should be to me...Tower at 118.2. Sometimes ATC will tell me to "resume" navigation and other times it sounds like "re-su-may" own navigation. When it tells me I'm cleared to NDB RH it will sometimes substitute a word that has the letters RH in it. Not sure on this but if you directed to a fixed navigation point, say NASCO, should ATC try to pronounce it as a word or November Alpha Sierra Charlie Oscar? Thanx. Love the product. Really adds to the reality.

Hey Dave, Apart from the other problem I am still having that I told you about in PM P2A is doing something strange now that it's never done to me before. I am filing flight plans and picking the runways I want to use but the Ground Controller is giving me what he wants. Example; I planned a flight today out of Chicago Midway (KMDW) and the winds were 200 and 13 knots in the weather briefing so I filed for a 22L departure which matched what Simbrief.com filed for me. This should be the correct runway. When doing Clearance/Delivery I noticed the control told me to expect runway 13L, which is for regional jets only, not big 737's. I re-filed and made d…

from KPHX, i requested a VFR flight following on app/dep frequency , and it was a complete silence each time . So, i checked the log as usual to see the problem :/ i would like an explanation of this part of the log where it seems to be the problem :