Pilot2ATC Bug Reporting Forum

Hi dave, Installed v2.2.2.0. Great improvement! Vectoring is really excellent. Missed approaches can be flown by the book. I installed the update, because I wanted to keep the changes I made to several airports. For instance at LGAV I rearranged and renamed the parking positions according to the official charts. After landing I could ask for a specific gate and were directed to that gate. After installing the update I'm always directed to gate 1, whatever I ask for. Is this a bug that can be solved or do I have to install the full version. And after installing the full version can I make changes to the airports as I'm used to? Thanks in advance, …

In this picture you can see i was cleared for ulme1n rwy 5 at lsgg.ATC started giving me vectors ( 2 hdg corrections) and it went silent.Not sure what happened. here is the picture

Hi Dave, Just installed the update 2.2.1.9R3. It seems to have solved my problem of not recognizing certain sentences (requests after a missed approach). Thank you for that. Only now I have another problem. Some frequencies for certain (Dutch) airports are gone. For instance EHAM no longer has CLR, GND, TWR etc, only Ctr frequencies. I understand the frequencies are now read from the Navigraph database (I have cycle 1707). When I try to change the controller frequencies in Config it says: "controller frequencies are from the Airac data and cannot be edited". Is this a bug, a Navigraph problem or am I doing something wrong. Regards, Fedor

SInce the 2.2.1.8 update, I am no longer able to get flight following. Even using the Say It function still does not work. This has happened on 2 different flights since the update. Here is an excerpt from the log showing what is happening. Recognized Speech: Skyhawk Three Lima Siera would like VFR flight following from Kilo Papa India Romeo Two Kilo Delta Zero Seven At Six Thousand Five Hundred Feet 20:47:58 Stopped Listening HandleInitialContact 20:47:58 SpokenRandomGreeting 20:47:58 HandleInitialCenterContact 20:47:58 CheckSquawkCode 20:47:58 SpeakAltimeterSetting 20:47:58 ControllerChanging: False : 06/28/2017 20:47:58 InterruptAudio in SayPhrase …

I am trying to create a flight plan and I am having issues with. Here is the route I am trying to create. KATL NASSA2 YAALL J14 LIT MLC PNH ACH ABR J78 DRK J231 HIPPI GABBL HLYWD1 KLAX First, I enter the starting and ending waypoint for KATL and KLAX. I then add the SID NASSA2 with the YAALL transition. Things look fine at this point. I then click on YAALL and load an airway for J14 LIT. My route then goes all screwy with a lot of GCRPt... waypoints and a route that takes me to Israel. I love the country but that isn't what I'm trying to. If you try to clean things up by deleting the GCRPt's you end up with unhandled exceptions. I am running the latest .18…

Hi Dave. Thank you for great addon. I use P2ATC with xEnviro.(xEnviro no show weather information) I use "WX" button for show weather and this works fine only first request. If I move in another airport and afresh request weather I see identical info how first request. I use X-Plane 11 and P2ATC last version.

Dave, not sure this is the same bug you mentioned awhile back but.... here's the screenshot http://postimg.org/image/611tyfpih/

http://postimg.org/image/vqh260wyx/

http://postimg.org/image/w60lnduj7/

never had this error ...its the first time .. http://postimg.org/image/68xqjac43/

The currentpos in the picture shows where/when I asked for vectors after a missed approach. The yellow line shoud indicate where atc is going to direct me. But instead of telling me to turn at the turntofinal dot atc told me to turn where the blue arrow is . What happened ? picture ->

I just did eidw-egno. As I was gettting close to the airport i got this from atc " airbus One Victor Bravo Expect the ILS approach to runway Two Five with the WTN transition at WARTON Turn Left Heading Zero Eight Eight cleared direct GINIS" Thing is that going direct to ginis would have meant to back .GINIS was a waypoint i had already passed.Not sure what happened ? logs https://pastebin.com/gz9Hs6n8 Thanks

With the new power switch bottom Left corner. Using Jar A320 have to turn the Battery and Avionics to Ignore in the config tab. Aircraft powered up completely and PWR button stays red until Ignore is ticked. Using default C172 no problem. XP11 latest, A320 latest.

During a flight eidw einn I got a crash on approach.Not sure it was because of the ils freqs (rwy24) was wrong in the software. Log here->https://pastebin.com/BkEFnZC7

All late versions, timer in top left corner keeps accurate minute time but hour increases randomly, sometimes coming up to the 1st hour it jumps to one then jumps to 2 after the hour passes.

On the latest version (2218). Two issues: Flying out of KMSP - in order to get a clearance from Clearance Delivery I have to use the Say It feature to get a response - I then get clearance from ATC. After that I am able to request push, taxi, etc as normal. Secondly, after taxiing (including holding short of crossing runway) and I am given clearance to take off. Once in the air I am directed to the next frequency, but at that point the PTT feature stops working and I am unable to communicate w/ ATC. One note - I have replicated the initial issue (needing to use Say It to get clearance) three times. I have not had a chance to replicate the PTT issue. …

Planning a flight from SARI to SPIM, both of which were accepted by P2A. As soon as I click STAR I get an unhandled exception" ************** Exception Text ************** System.Data.Entity.Core.EntityCommandExecutionException: An error occurred while executing the command definition. See the inner exception for details. ---> System.Data.SqlClient.SqlException: Invalid column name 'NavaidIdentifier'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at …

It just happened again. The software just stopped and restarted and crashed. LOGS ->>> https://pastebin.com/k2G4Pb3b

With FPL window open, I close P2A. When I launch P2A again, FPL windows is off... does not remember "on" state as it did in prior versions.

I did a flight ENGM getpa koret latku kelin lalil topla atrib EKCH and after awhile the software started hanging so I restarted it and contacted center and resumed flight....it hung froze and gave me strnge vectors logs -> https://pastebin.com/dMT7RSCu

After installing 2.2.1.7 I am not able to edit controller frequencies. Airports that have controller frequencies do show up in the info box, but in Config/ATC Settings/Edit Controller Freqs they are not editable. Thanks, Bruce

Flight from KSAC to KPWT. I was given the SLNT1 departure with the SAC transition. To the best of my knowledge, there are no DPs at KSAC.

I have the copilots options both ticked but Fo seems to have a mind of his own tho. When I connect FO seems to change and activate freqs a few times and then it stops. ATC tells me to climb to 15000 or so feet and then goes silent.If I ask for new altitudes and i get them but I don't get descent instructions. I'm on the latest beta2.2.1.7b Here's the log https://pastebin.com/aSMCcknb

Hi, I downloaded and installed Version 2.2.1.7b. Then I have updated the airac data to 1707 with Navigraph program pilot2atc_1707.exe. After starting P2ATC I get this error message: Unable to initialize Database An error occured while executing the command definition. Se the inner exception for details. Invalid column name 'Frequnecy Unit'. If I cklick on OK button then I can use P2ATC. But I do not know if it is working properly. Can someone help. Thanks and best regards, Markus

I just installed 2.2.1.6 and manually updated AIRAC to 1706r4. I'm trying to plan a flight from 4U9 and got an error that I had to set the departure airport as the first waypoint of the flight plan. I tried making 4U9 the destination (from KDLN) and was told that it was unable to locate waypoint 4U9 in the database. I've tried some other three-character airports (6S1, 7S1) and have the same problem. A nearby tiny airport with a four-character code (MT05) works fine. However, I can pull up Taxi Maintenance and browse to 4U9 without any difficulty.