Pilot2ATC Bug Reporting Forum

After the latest version of navigraph when I start or do a flight once I get to the runway p2atc asks to tune transponder to 1200 then after take off I get a message permission to change frequency accepted then no further comms. any ideas on reason please

Not really a bug but I've noticed whenever i have the map up pilot2atc is using around 10% cpu. If i minimise the map or minimise pilot2atc cpu usage drops to below 2-3%. Is there a way to maybe reduce map refresh update rate? Or something else so I can keep the map open with lower cpu usage? Even if the map only updated every 3 or 5 seconds would be more than enough.

Flight ENBR-EKVG Just after departure (SID REKL1C) I requested a shortcut in the middle of the SID to REKLI with assigned altitude of FL160. P2A cleared me to REKLI, but after that P2A left me at FL160 (or at least I supposed P2A wasn't going to clear me to my final cruise level). So I decided to take initiative and request a climb clearance. Here you can download the entire log and here below is the related part. Thank you in advance. InterruptAudio in SayItSpeak- Phrase: NOR SHUTTLE Zero ThreeTwenty One request clearance direct to Romeo Echo Kilo Lima India 03/30/2019 11:16:23 AudioInterrupts: 1 in InterruptAudio 11:16:23 WaveOutPl…

During my flight from EKVG to ENBR, after reaching cruise altitude (or just before) of FL370, P2ATC showed a small window telling that it wasn't able to calculate the TOD. After that it cleared for ILS and told me to descend immediately. Here's the relevant part of log. And from here you can download the flightplan and the full log. heckAlt - NextAssignedAltitude is 37000 - 00:41:26 CheckAlt - AssignedAltitude is 29000 - 00:41:26 CheckAssignedAltitude 00:41:26 InterruptAudio in SayPhrase NOR SHUTTLE Zero ThreeTwenty One Climb and Maintain Flight Level Three Seven Zero 03/30/2019 00:41:26 AudioInterrupts: 1 in InterruptAudio 00:41:26 WaveOutPlayer Pau…

Hi, I'm a new Pilot2ATC User. Yesterday I did a flight from EKVG to ENBR and I noticed that Pilot2ATC wasn't giving me the correct weather info for EKVG. I'm using ActiveSkyXP. Today, collecting the relevant logs I saw this log: Error in XPWeather DecodMETARString 03/29/2019 23:47:11 System.InvalidCastException: Conversion from string "-" to type 'Double' is not valid. ---> System.FormatException: Formato della stringa di input non corretto. in Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String Value, NumberFormatInfo NumberFormat) in Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(String Value, NumberFormatIn…

Hello there! I had a problem today with Pilot2ATC Version 2.5.0.7_x64 with X-Plane 11. After successfully file a flight plan, request IFR clearance, Request Pushback and Engine Start there was no response on the Taxi request. Also with the "Sayit" Feature there wasn't any response. After disconnecting and reconnection P2ATC to the sim I did the same procedure again with the same result. Log-File is attached. BR Andreas

ATC verbal references to Ft. Worth Center do not correctly pronounce the word "Fort". I'm pretty sure this is because it is encoded into the system as "Ft. Worth" instead of "Fort Worth." Is it possible to correct this? I suppose this applies to other "Fort" locations like Fort Meyers or Fort Lauderdale, etc. but haven't checked.

Validated and filed flightplan from EFHK to ESSA. Issuing "Ready to copy IFR Clearance" but P2A keeps saying something like "Your flight plan does not originate from this airport...." and tells me to fix it. I've tried to find out what is the issue and change plan in many ways but with no luck. Is this a bug?

I am trying to fly from NZPM to NZAA. If Auto Plan is used, I will get the following flight plan, which I can File with no issues: NZPM SID(DADL2S-RW07-RUGVI) STAR(DAVE6C-RW23L-DAVEE) APPR(ILS-RW23L-I23LW-EMRAG) Now, if a waypoint is added to the flight plan, for example IDLOK, it will not File anymore. The following flight plan, which was created with RouteFinder, is also impossible to File. NZPM RUGVI H182 PEPPE NZAA

This wont work as the radio can only tune 125.065, 125.075 or 125.080.

I created a flight plan a couple days ago for KSAN to KLAX. It files fine. Today I'm actually finally going to fly the route, but the departure direction is changed at KSAN. So I've started a new flight plan from runway 09 instead of 27. Now the flight plan won't file. I see an error in the Pilot2ATC log file: Begin FPLFile 12/25/2018 22:17:46 AssignedSID: RW09-FALCC1-SLI - AssignedRunway: RW09 - FltPlan ActiveSID: RW09-FALCC1-SLI - Error in btnFPLFile: System.ArgumentOutOfRangeException: Non-negative number required. Parameter name: count at System.ThrowHelper.ThrowArgumentOutOfRangeException(ExceptionArgument argument, ExceptionResource resource) …

Hello, I have imported the P3d .pln file below into Pilot2Atc by the "Impt" button. I have loaded the same file into p3d and all waypoints are displayed correct there (LOAV,SV001(user waypoint),TF(NDB),LOGP) Result in Pilot2Atc after loading the file (showing only the airport waypoints and a generated TOD) LOAV VOSLAU TOD PT ---- LOGP PINKAFELD (I did not found an option to upload a screenschote or attachment here) This is a user waypoint created within P3D V4.4 and can not be read by Pilot2Atc <ATCWaypoint id="WP1"> <ATCWaypointType>User</ATCWaypointType> <WorldPosi…

I have no ATC Centre radius in the config anymore?

I was at cyul (addon scenery) and was told to hold short runway 24R due to traffic on final which was accurate but the instructions continued to be replayed constantly...stuck in a loop...

Hello Dave I have a problem on my PC with select output devices. I have 3 playback devices: - one USB headset, - one stereo speakers set (realtec Hight Definition audio) - one o.display screen with integreted speakers (Nvidia Hight definition audio). I would like to use my headset for eared both xplane 11 sound and P2A ATC voices but when I select USB headset in windows and P2A, there is no ATC voices. The ATC voices works only in speakers or screen when they are selected in P2A.... I have no problem on speech recognition with my headset. Thanks for your help Pascal

Hello, I go by VFR without a flight plane Location LOAV (Wind: 010 at 4 ) First i requested active runway and got correct runway 31, After it i requested taxi to active runway I Got runway 08 (grass for verry small airplanes) I am not a real life pilot, prorbably i do something wrong ? Controller: Info_Tower (LOAV) 118,6 Pilot: <call signe> "say active runway" Response: Runway 31 for arrival and departure Pilot: <call signe> Request taxi to active runway Response: taxi to runwax 08.... !

Hello, I just bought Pilot2Atc Thanks for your grate work. I would like, the Copilot should only reading back the messages automatically. Into the config dialog (Speech) are two check boxes. "Responds To Radio" and "Changes Frequencies" If i uncheck "Change Frequencies" the check box "Responds to radios" will be automatically unchecked too by the software. If i check the check box "Responds to Radio. The second checkbox will be automatically checked too by the software. I want to check only the first checkbox "Responds To Radio" and let unchecked the "changes frequencies" box. This is current not possible. PS: It would be great if th…

Hi all, sometimes, I get strange taxi instructions with unexpected routing. See screenshots. I am heading south, but taxi instructions are given to north and crossing runway and its a way to long, but shorter taxi route definitions are available (see second screenshot). Anything I can do here to avoid this? Cheers, Michael

ATC descends fine, but it says "Climb and main" instead of "Descend to". For example, at TOD FL380, it says "climb and maintain FL300", then "climb and maintain FL222", then "climb and maintain 15000" etc. Version 2.5.0.7_x64. This happens on all my IFR flights.

Dave, Flying P3dV4.4, Version R6 of P2A , Airac 1812 rev3. Could you please check this route created by "Auto Plan"? Does it look right to you? This doubling back to SLI KSAN_--> KSNA SID: Cward2 tranistion SLI Arrival : Kayoh7; Kayoh--> Jogit--> back to SLI Approach:SLI-->Sager-->ILS20R Best regards Hari

Greetings! I have already shut down Pilot2ATC so I might not be able to provide all the requested info for a bug report but here is what happened: Started at KTRM and set up, validated and filed a VFR plan to KPSP which is some 25 miles away. Called KPSP tower about 15 miles out (active COM showed KPSP Tower) and requested a straight in approach for runway 31R. Speech recognition understood my request for my approach exactly as I said it: straight in for 31R. ATC came back and approved my approach and told me to call when established on a 5 mile final to runway 35. KPSP only has 2 runways: 31R/13L and 31L/13R. I ended up just landing on 31R and as soon as I…

Further to my post The new r6 update fixes airports with simple SIDS like EGCC etc. But EGLL curved SIDS still have a problem tracking.

Hello, had a crash in P3D tonight in attempting to use P2A. It sputtered a bit and then had a CTD. Here are the event viewer logs, looks like both P2A and P3D crashed. This is my first such crash so I'm not quite sure which program caused the other to crash but thought I would post it here for feedback. Five event viewer entries: #1 Log Name: Application Source: .NET Runtime Date: 2018-11-28 9:21:28 PM Event ID: 1026 Task Category: None Level: Error Keywords: Classic User: N/A Computer: DESKTOP-1N0QFSI Description: Application: Prepar3D.exe Framework Version: v4.0.30319 Descript…

I have the latest navdata and there are frequencies in my custom scenery but none show up in P2atc. X Plane 11.26.

Hi Dave, I've been having this problem at almost every airport. Not sure where the problem is. See the attached picture for reference. Basically, after landing, and switching to ground frequency, i request taxi to a gate, in this case D6 (which i say as Delta 6). As you can see in the picture, there is a gate D6 defined. But P2A seems like it's ignoring me and just gives me a random gate. If i select the gate D6 i want in the info window, and then use say it to "request taxi to gate" it gives me that gate fine. Am i doing something wrong? https://photos.app.goo.gl/TH7Q2Sv9c1xhgHpB7 Thanks, Joe