Pilot2ATC Bug Reporting Forum

Hello noaa weather doesnt work anywhere in the world. Does anybody have same issue? Thanks Harold

Hi Dave I have been trying to perform flight from EGCC to EGHI and all is well until MCR CLR DEL hand me off to MCR CTR. Manchester Centre shows up underneath the standby frequency but when the frequency is swapped to active it doesn't show up underneath and no-one from MCR CTR is listening. I have checked the frequency in the ARTCC in taxi maintenance and it is there (118.775) I am using MSFS, I'm on the latest beta (M), and Windows 11. I don't get any error messages. I have tried swapping frequencies multiple times and I have disconnected and reconnected mid flight (and refiled) and it just won't seem seem to assign MAN CTR despite the frequency bein…

It's nothing serious but since Beta7L I got the following error message closing P2A accompanied by a box "Program has stopped working": It doesn't matter if I start P2A alone or together with P3D 4.5 HF3. I changed to other "map views" without releaf Program StartedPilot2ATC® (P2A) - version 2.7.0.0_x64_Beta7M 02/03/2024 09:12:02 Windows OS: Microsoft Windows 10 Pro Version: 6.2.9200.0 Platform: Win32NT Memory: 33411727360 Trying to create DB_Dyno. DB_Dyno created successfully. Init 15% done. Trying to create DB_Base. DB_Base created successfully. Application frmP2AMain starting 02/03/2024 09:12:15 Loading Joystick Devices - 7 devices loaded. Loading Form Main f…

I don't recall if I noticed this before but this is a major drop in fps. Not sure if this is a bug or if it can be corrected?

Hi, I use P2ATC (beta 7L) with xplane 12 (last version) and Traffic global (last version), it works well, the AI is detected by P2ATC but I encounter a small problem during landings, if there is a plane on the runway and I am on final, p2atc still tells me that it is cleared for landing, and sometimes he makes me land on the runway that is not facing the wind, so I am with planes arriving from opposite.

worked great with windows 10 but my new rig only was built with windows 11. geek squad said windows 10 no longer installed.ok so trying to load back P2ATC and it just wont load.is there a fix or a new version on the horizon?

I am having issues with Pilot2ATC not providing takeoff clearance when I reach the runway that I've been cleared to taxi to. I am using MSFS 2020 with the PMDG 737-800. Everything works fine with respect to clearances up until this point, but when I request departure from the active runway while at the threshold, it will not respond and provide the clearance. It has happened at both CYYC and CYVR for me, so not isolated to a single airport. I have imported all Taxiways and Gates from All Airports using the MakeRunways software. I would appreciate some help solving this, as I'm forced to takeoff without clearance and fly the remainder of my route with Pilot2ATC! Othe…

Today I updated FSUIPC to the latest version v7.4.2. Now in Pilot2ATC the radios don't detect the changes I make in MSFS. Using Pilot2ATc v2.7.0.0 Beta 7L.

Hi All, Not sure if this is a bug or not, but I find that Pilot2ATC doesn't show many all the AI aircraft around me. Not sure if its a setting on my end.... In the example below you can see AI traffic (being provided by AIGTC) appears as it should on LittleNavMap. But on the Pilot2ATC screen you can see only one of the aircraft. None of the parked aircraft that are visible on LNM are visible on Pilot2ATC. Any ideas why? I'd love to ditch LittleNavMap but the UI in Pilot2ATC just isn't quite at the same level 😞 LittleNavMap: Pilot2ATC

Hello, just wanted to basically reiterate the bug that another user posted below happens to me also with BETA 7L..Marseille Center is bugged a f. I cannot change frequency, it doesnt recognize it and if i try to change I just get told to contact Marseille Center again.

I have noticed of late that the 2 radio frequencies that normally show in the interface window, from time to time just randomly disappear and I loose coms. When I try to manually assign them again from the Frequency menu, it takes a few clicks for the action to be registered . All very clunky. I am currently on beta ‘i’ I believe, or at least the latest one. Is this a bug or am I doing something wrong, as I have not seen this before. I was flying from EGPD, but have noticed the issue in other locations as well. Any thoughts would be appreciated as it really breaks the flow and immersion. I am running XP11.55 Thanks..

This is the issue I am seeing Simulator Connected Recognition Engine Installed Grammars Loaded Piper November Echo Oscar Radio check; Piper November Echo Oscar You are loud and clear. Piper November Echo Oscar Say Altimeter; Piper November Echo Oscar Current Altimeter is One Zero Zero Six Piper November Echo Oscar Say Altitude; Piper November Echo Oscar You have not been assigned an altitude. <---- (this is true, just checking responding) Piper November Echo Oscar would like VFR Flight following to Whiskey Alpha Echo Echo; <--- (the magic phrase to make her deaf) Assigned Ctlr:Biak Ctr 128.50 **end of conve…

Running latest beta because I hoped it would fix my issue with the stable version but it hasnt. Basically I am not seeing any AI traffic at all. I have selected the little red and blue AC icons but still nothing shows up. It doesnt matter what traffic I use, MSFS real time AI, MSFS Offline AI or my preference which is FSLTL. I have tried reinstalling FSUIPC and that made no difference. Little Navmap shows the traffic no problem. Yes I have a connection between P2A and MSFS. BTW this used to work. I've been putting up with it for ages until now but I would like to fix it.

Program closes at random momemts when using M2SS All set up and going then just closes with no input Using with GSX and PMDG 737.

I'm getting this at every airport tried changing the weather to sim weather rex weather back to noaa nothing works any help appreciated thanks

Not 100% sure if this is a bug, or something I did wrong, but did a short flight this morning from KVES to KDAY. Both airports use Columbus approach/departure on 118.425. At KVES, I was handed off to departure on 118.42, then shortly after takeoff, it tried to hand me off to Columbus approach on 118.42, which started a loop. I tried switching away then back to, checking in again, etc, but nothing seemed to break the loop and start the approach clearance. In the end, I'll admit I ended up disconnecting and just routing myself in. Logs below: Program StartedPilot2ATC® (P2A) - version 2.7.0.0_x64_Beta7J2 11/11/2023 15:37:47 Windows OS: Microsoft Windows 10…

Hi, I`m having issue with all flights passing over Marseille because when atc give me the command to switch to Marseille Center on 119.82 the program doesn`t recognize the frequency and I cannot continue the flight. It`s like i never set the right radio frequency. I think there is some conflict in the database and i`ve tried to import new ARTCC data but i`wasn`t able to: there`s a specific procedure for MSFS 2020? In the documentation I`ve found how to do with FSX or P3D. Thanks

Each time I connect now the weather is not available. Anyone with similar experience?

I'm sorry if this has been asked before but I have searched and searched for this. I am getting waypoints in red text in the grammar window - just on their own line, not on any speech line. Is this just P2A showing it's recognised/reached the waypoint or does it mean the aircraft has missed the waypoint and P2A is flagging an error ? I am having a problem where I am flying the approach as requested by approach, but I am never handed over to tower. I am expecting something like "contact tower when inbound on the approach" and then getting landing clearance from the tower when contacting them and saying something like "inbound on the approach". I am able to contin…

I've run into an issue with the frequency for Montreal Center since Beta7G. For example, sitting at CYAS, I'm given a center frequency of 133.2, but upon switching, it reports as 'ENNM ATIS'. I get similar results at other airports in the area, although it reports different frequency names (06FA Tower, as another example). I tested a few other airports out of that area, such as Atlanta Center, and didn't encounter this. I did try re-installing, and it worked fine, but once I install the latest Beta (7G3b), it was reporting incorrectly again. So, I went back a few betas and walked them forward, and everything works fine up through 7F, but once I move to 7G, or a…

Beta 7H Co-pilot managing radios. Stand manually set in INFO before landing. ATC seems not to recognize the co-pilot read back. See Below: TWR: Ground on One Two One Decimal Seven Five SCANDINAVIAN Four Seven Seven; Me: Bodo Ground SCANDINAVIAN Four Seven Seven Request Taxi to the Gate; GND: SCANDINAVIAN Four Seven Seven Taxi to Stand one nine Via taxiways Delta, ~ Taxi to Stand one nine Via taxiways Delta, SCANDINAVIAN Four Seven Seven Co-pilot: Taxi to Stand One Nine via Taxiways Delta SCANDINAVIAN Four Seven Seven; ATC: SCANDINAVIAN Four Seven Seven Taxi to Stand one nine Regards Erla…

Beta 7H. Co-pilot managing the radios. After a request to leave frequency to check weather and coming back on frequency the co-pilot issues a check in message rather than a back on frequency message.

Firstly great work on keeping the regular updates / fixes coming! I had a read through the recent changelogs and stumbled upon the updated callsign logic. To my understanding it seems like this logic isn't 100% correct (or maybe I am misunderstanding Simbrief and happy to be corrected!). If I have the following flight: U2 7839 // EJU 78VA (easyJet Europe flight 7839) I fill in Simbrief flightplan as follows: Airline: U2 Flight number: 7839 Callsign: EJU78VA But according to the 7E logic this would result in the following P2A callsign: U2 7839. Shouldn't logic be: If callsign is available shouldn't it always take that field as priority? So first 3 character…

Hi Dave, I downloaded the latest beta 7G2. When connecting to FS2020 being in LSGG, it connects to CYXL ATIS instead of LSGG ATIS (frequency is correct though). If I try to connect manually to LSGG Clr_Gnd (121.67), I can see the correct information in the STDY frequency (indicates 121.67 and LSGG Clr_Gnd), but as soon as I switch to this frequency, it connects to the correct frequecy but shows DTNH Ground. If then I connect to LSGG Ground (121.85) again I see the correct information in the standby frequency, but when I switch to active it goes to 121.85 EBBE Gnd. Seems P2A is mixing frequencies. Thanks, Fabrice

Hello Dave, I use the version 2.7.0.0_x64_Beta7E. Since I often fly with different callsigns, I have tested the beta version. It works with Simbrief also very well. On the last 3 flights I noticed a problem. After the pushback and engine start I get no release for the Taxi Request. There is no answer. Also the automatic change from ground to tower at the runway did not work. I set the tower manually, then the release to start was no problem. The rest of the flight went without problems. I have saved the log file. I have attached a part of it: Com1StandbyFreqChanged: 121.925. CtlrShrtName: RJFF ClrDel CtlrType: ClearanceDelivery20:14:27 InterruptAudio in SayI…