Pilot2ATC Bug Reporting Forum

Hi everyone, I already know that there have been many posts regarding this type of problem but dealing with msfs 2024 maybe it's something different. Anyway I install p2a, everything is fine, I do what the guide explains to me, I connect the whole simulator, but there is nothing to do, my voice goes through the microphone, because it works 100% (I tried other similar programs BACT, Fshud) but it does not arrive to p2a, I also thought that msfs 2024bmi was stealing, so to speak, the microphone, since it is written that msfs is using your microphone, surely a bug since I have the chat disabled. And so nothing done I tried, I think everything, I read most of all the posts he…

In flightplan I left Star and Approach empty when planning. Rw is filled automatic when selecting Airport, no way to delete it. Tested by entering an airport manually and it selected a rwy by itself. At Dep airport if I leave SID empty Clearance gives me a SID, nice. In real life, if I am not wrong, pilots get the STAR and RW from Approach controller when contacting them. Just because weather or traffic might have changed when I arrive. What happend to me was that Center told me to expect Vector to Rw 17L, nothing about a Star. Should not Approach do that, Star and Rw? Anyway Approach continued talking about Vectoring, no Star. There where several avai…

I think when ATC are giving you instructions and you click on SPEAK button before they have finished, it breaks the whole ATC speech completely. They interact, but no sound, and you cannot SPEAK in return... Regards

During departure and climbing holding around 250 knot and after passing 10 000 and started to accelerate ATC tells me to slow down to 250. Gives order to climb higher but nothing about the speed. So I just turns on FMC speed and not a word from ATC Checking SID charts I can not find any speed restrictions. Happen twice now from different airports.

Get this error when trying to buy with PayPal SyntaxError: Unexpected end of JSON input

I open the program, headset enabled and save the configuration. I open the program without the headset and it has recognized the change in hardware even though the program won't function without the headset. So I enable my headset and then must go back to hardware and change it from my speakers to the headset. If I forget, the voices come from my speakers while static sounds come through the headset. Am I doing something incorrectly?

Chattersounds from ATC chatter are working but you cannot select the region anymore, and the max delay is 120 sec, version 2 was 5 min.

XP12. Had the auto-response etc on for a bit. Now I have lost Freq box display. I tried INITIAL CONTACT and P2ATC crashed. I re-started P2A reloaded the plan and connected etc, still no Freq box, and P2A keeps crashing. 😕

Flight was ok but at the end after pressing the approach button the program crashed, I had a valid flightplan and Star/Runway regards Wim

Team: I updated today and after completing my data conversion, I have lost all voices. I can hear the distortion, but no voices. Have uninstalled/reinstalled with no improvement. Thoughts?

Climbed up to FL130 as per instructions - Fenix is on Std & at FL130 - ATC insists I descend to FL130 (no restrictions in place) never gives further climb after SID. Spoiler 2024-11-12 22:30:57.9661|INFO|Pilot2ATC_3.ViewModel.MainWindowVM|Program StartedPilot 2 ATC (P2A) - version 3.0.0.0_EarlyAccess 0.0.27G 11/12/2024 10:30:57 PM 2024-11-12 22:30:59.9587|INFO|Pilot2ATC_3.ViewModel.MainWindowVM|Pilot2ATC® starting initialization. 2024-11-12 22:30:59.9587|INFO|Pilot2ATC_3.ViewModel.MainWindowVM|NumberDecimalSeparator: 2024-11-12 22:31:00.3442|INFO|P2ADataLinq.WxMgr|Retrieving weather from web successful at 11/12/2024 10:31:00 PM 202…

Hi, I can't swap communication frequence during a flight with FBW A380 (see red arrow below). I know it is also a early version of the A380. If I use the same flightplan with FBW A320 and P2ATCv3 everything works fine. I use P2ATCv3 Update_EarlyAccess_0.0.27H with Navigraph 2411. Any idea what this could be?

Small issue but the (selected) sound if com freq changes is not working

AI planes from Traffic Global do not show up at the correct position , you can see the planes but they are not correctly updated. Planes are visible in the XPlane map, but do not show up in P3ATC at arrival airport. ATC Traffic alert does not work.

Just downloaded version 3after years of version2. The program shuts down after entering any info. exampl: to create a flight plan departing atlanta, KATL. I type K A as soon as I type the 'T" it shuts down. Even in "Settings"after typing a few letters the program shuts down. Any Ideas Denis

i try pushback and engine start from the gate it gives ctd

Hello i was able to have traffic, no interations or warning but appear on map, now i cann t be able even to show dont know why Best Regards

Hello Dave, the new interface looks great nice job! Using V3 EarlyAccess_0.0.13 I haven't been able to connect to the X-Plane traffic plugin over the network. I was able to install the newer version of the plugin using the installer included in V3. I have firewalls turned off on the P2A and X-Plane computers. Connecting with P2A V2 works fine. Any ideas? Thanks ! ! Bruce

Hi, both 0.0.26B and the current 0.0.26C list „Fixes possible problem where Validating Flight Plan adds waypoints.“. Since then (at least did not notice before) my flight plan is „doubled“ (I get a new Section appended starting with the depature and ending with the destination airports highlited, with the first waypoint on the original fpln removed and prepended to the first waypoint on the „second“ one, doubling up there). So the flight plan is unusable after the validation.

Hi fellow pilots! I have recently updated my P2A version to 2.7.0.2 and trying to get it to work. However, when i am in the cockpit at an airport and ready to talk to ATC, i click connect and receive an error stating that "aircraft position can not be found". I have clicked on the yellow centre on aircraft button and that does nothing either. I have the latest FSUIPC and it is running. It does connect to the simulator, but it cannot seem to read my location. Can anyone help me? This software looks really cool and i would like to fly with it! I am sure i had it working when i first bought it last year but i did not know there was an update f…

Hello In v3 is always say again your call sign.... Best Regards

When exporting a flight plan from P2A to X-Plane 11/12 format, the content of the P2A "Via" column is exported as column #3 in the .fms file. This results in e.g. writing the string "Airway-Y101" there, where only the airway name ("Y101") is expected by the FMS file format. For example https://developer.x-plane.com/article/flightplan-files-v11-fms-file-format/ states "The third column is the via/special column. It can have the following values: ADEP/ADES for departure or destination airport of the flightplan, DRCT for a direct or random route leg to the waypoint, or the name of an airway or ATS route to the waypoint." So exporting some exemplary plan results i…

V3.0.0.24B, Windows 11, XP12. I left the aircraft cruising while I done some chores and switched on the auto-response, and auto-tune for about an hour. When I "took control" again, ATC did not respond to me in anyway, and also gave me instructions without any sound, but I could see the text. the SPEAK option did not work either. Tried turning on the auto-response again, but that stopped working. ATC was giving me instructions, with no sound, all the way to approach... 😐

When I press the Data Mnt button in the settings under Data Conversion, I get this error. code = Error (1), message = System.Data.SQlite.SQLiteException (0x87AF001F): SQL logic error no such table: ATCControllers .......... What am I doing wrong?

Flght plan wont upload until told by atc that no plan is on file. Then it works. How to fix?