Pilot2ATC Bug Reporting Forum

Hi, I am on beta 5k, today I got cleared for departure although there was traffic on final for this runway. It looks like it could not see the traffic. I use FSLTL

It's a pity to spend hours to get a small function right. A button on the Thrustmaster T.16.000 joystick has the number 14 in MSFS. If I want to assign the button for Pilot2ATC as "Sayit" button, the button 13 is displayed. If I program it to Pilot2ATC (Sayit), nothing happens. Sayit is not triggered. Why are the assignments in Pilot2ATC wrong? What is the solution?

Concerns a flight plan from LSGG (Geneva) to Munich. In LSGG actually correct from RW 04. The opposite runway is correctly called 22. Two mistakes: a) In Pilot2ATC runway 05 and 23 are implemented by mistake. b) Although my flight plan is from runway 04 (or wrong 05), when pressing the INFO button only runway 23 (wrong) is displayed instead of the information for runway 04 (or wrong 05).

Hi, I posted this in the FSLTL (AI aircraft injector) forum and they suggested I come here also. Issue: Displaying aircraft on the ground (blue) works well Display aircraft in the air (red) shows both on the ground and in the air. Repeatable on demand while user aircraft is on the ground at any airport.

Hello new to p2atc i noticed a few times when being vectored for landing that the atc repeats procedures over and over again any fix for this?

Hi. With the version 5X of Beta, importing scenery rom MakeRwys seems to note be working. No progress is shown in the taxyway imort box and gate import hangs at 90 %. It worked fine with 5V.

No matter what I do after loading fpl from simbrief the cruise altitude is set at FL116. It should be for this flight FL380. I cant even manually change it, can change everything else like des and GS etc but not cruise. Never had this issue before. Currently using latest beta but did revert back to stable latest version and doing the same.

hello love Pilot2Atc and are having alot of fun with it - one little issue i seem to have the "Response to Radio option keeps unclicking it self " anyone else having this issue - i click it - when i hear no response i go back to the conf and once again is unclicked any work arounds? what am i doing wrong? manuel

I'm getting this across the stable version of Pilot2ATC and also on beta 5s4. I'll start up P2C once I'm on the runway / ramp and get through the instructions for takeoff. However, if I request a flight level change, a radio check, altimerter or weather report, I get no reply and any subsequent instructions illicit no reply. Other than the initial request, no further of my requests are displayed on P2ATC window although i can see that the Push To Talk button is activated. Then, anywhere between 2 and 10 minutes later, I'll get a flood of replies from ATC from my previous queries. Log file below Program StartedPilot2ATC® (P2A) - version 2.6.4.2_x64_Beta5s4 03/22/…

Steps taken. Launch microsoft flight slimulatorlet it fully load the start rex weather effects and start the real life conditions Launch Pilot to atc connect to sim wait 2 mins contact atis and it says the wrong altimeter

Hi everyone, Since I have updated my computer to Windows 11, Pilot2Atc doesn t work ! A lot of buttons are missing. Impossible to use it ! David

I have a problem with ATC giving me strange taxi instructions with the latest P2A beta. Is it just me or someone else have this problem?

still not loading MSFS2020 all i get up is the grammer

Hi, my first post here. I’ve been using P2A for quite some time and I’m really enjoying it! During my last flight I encountered a problem. The situation: a short VFR flight w/o flight plan from EPGD to EPOK (Oksywie), just ~15 nm away departed with no issues, squawk 1200 called EPOK tower for landing P2A correctly answered as Oksywie tower, but assigned me RW29 for landing the problem is that RW29 is at EPGD, but not EPOK; the correct rw would be 31 after landing on RW31 I was advised that I landed on a wrong runway upon taxi request I was directed to EPGD(!) ground frequency I guess that P2A “thinks” that I am on EP…

After MSFS is running and P2ATC is loaded I hit the Connect button and nothing happens. I can't add attachments in Avsim so the log file is copied below. I confirmed FSUIPC is running and the version is 7.3.16. I think the problem started when I upgraded FSUIPC to 7.3.15. I would fall back to an older version but I don't have access to an older copy. Thanks for any help provide Dave. Richard Logfile: Program StartedPilot2ATC® (P2A) - version 2.6.4.2_x64_Beta5c 01/28/2023 10:59:57 Windows OS: Microsoft Windows 11 Home Version: 6.2.9200.0 Platform: Win32NT Memory: 34025422848 Trying to create DB_Dyno. DB_Dyno created successfully. Init …

I have XPUIPC plugin loaded, P2A_XPLink plugin loaded, X-Plane running, in cockpit, and trying to get Pilot2ATC to connect and getting the following error:- The SIM or FSUIPC/XPUIPC stopped functioning and P2A is Disconnected. Error in frmP2AMain ConnectToSIM FSUIPC.FSUIPCException: FSUIPC Error #9: FSUIPC_ERR_NOTOPEN. The connection to FSUIPC is not open. at FSUIPC.FSUIPCConnection.Process(Byte ClassInstance, IEnumerable`1 GroupNames) at P2A2021.P2ASimulatorFSUIPC.Init() at P2A2021.frmP2AMain.c6da96e2c3dc97ecb14521624b5c07984() Simulator Disconnected. 03/24/2023 14:55:57 Loading Joystick Devices - 4 devices loaded. Loading Joystick Devices - 4 devices loade…

Hello folks, I need a little help with importing airport specific taxi routes and gates. I am able to get them to show up via taxi maint option, however they just seem to disappear and never show up when I try and use them. I have tried pushing the various save options, but they just disappear. Any advice? Thanks.

Hi Dave, With the latest beta 5T, when i launch P2ATC, it launches into the frmGrammar window, with no way for me to get to the main app. Joe

I have P2ATC set to use sim weather in the config tab. P2ATC informs me that weather is not available at my location. Nor is altimeter. Am I missing a setting somewhere perhaps??

Yesterday I did a VFR flight from KHND to KIFP. When I requested landing clearance from KIFP tower he instructed me to enter a left downwind for runway 16 and to report downwind. When I reported downwind the controller once again told me to enter a left downwind for runway 16 and immediately gave me clearance to land. This happened again after touching down when telling me to exit the runway when able. The tower controller told me everything he already said every time he talked to me.

Every time I take off VFR the tower gives me clearance to change frequency. This happens even in the slow Cessnas so it has nothing to do with climbing too fast or leaving the class D horizontally. I checked the radius settings and I believe tower radius was set to 5 nm. Any idea why ATC wants me to switch frequency long before leaving their airspace?

I had an aircraft reg with "X" as the last letter, TTS was pronouncing it as "The tenth ray" because it's parsing "X-Ray". Is it possible to have it parse "ex-ray" or something similar so that it's pronounced correctly? I am using Amazon Polly. On the latest beta, if that matters. Thanks dave.

Sometimes Pilot2atc stops responding. When I close msfs (restart or main menu) then p2a gives all the respondings on the requests that were not answered before. I wonder what can be wrong here.

Had this issue a few times now. If a runway has a displaced threshold, ground expects me to takeoff at the landing threshold instead of the takeoff displaced threshold. Only way ground will hand me over to tower is if I taxi all the way to the landing threshold. Is this a known issue? Thanks

I've noticed that the VOR frequencies sometimes show up in the P2ATC flight plan and sometimes they don't, even in the same flight plan. Is there a reason for this or something I'm doing wrong? Thanks, Doug