Pilot2ATC Bug Reporting Forum

I am importing a flight plan via simbrief and then i open the tab "App-Dep Procedures". When I try to choose a SID the program shuts down itself. I am running P2ATC as admin. I have installed the ver 0.23 for MSFS2020.

Alot of times the approach or tower freq thinks it a new number but still old tower with departing runway. Alot of times calls for frequency with a 6 digit number and com only takes 5? Can click on freq number under airports listing can get ya there, cant type it it?

I get a CTD when loading approaches, and when disconnecting from XP. V3.0.22

When flying the flybywire a320(only plane i have flown so far) in msfs 2020 and using pilot2atc ver.3 the logitech radio panel has issues during the flight portion. Squawk display goes on and off. And the radio tuner jumps back and forth when adjusting frequencies. Making it hard to tune in. Seems to work better on the ground. All works fine in old version.

XP12, PC, P2A V3.0.023 https://drive.google.com/file/d/10sPbv2HfqJWlqCiDIWcKv9olBfawYdzc/view?usp=sharing

After completing the conversion I get the following error and Pilot2ATC will crash. code = Error (1 ), message = System.Data.SQLite.SQLiteException (0xB7AF001 F): SOL logic error no such table: ATCControllers at System.Data.SQILite.SQLite3.Prepare(SQLiteConnection cnn, SQLiteCommand command, String strSql, SQLiteStat ement previous, Ulnt32 timeoutMS, String& strRernain) at System.Data.SQLite.SQLiteCommand.BuildNextCommand0 at System.Data.SQLite.SQLiteDataReader.NextResult0 at System.Data.SQLite.SQLiteDataReader .. ctor(SQLiteCommand cmd, CommandBehavior behave} at Syst em.Data.SQLite.SQLiteCommand.lExecuteReader(Command Behavior beh…

V3 looks for ...currentwx_snapshot.txt The format in my install is ...current_wx_snapshot.txt

I use P2ATC from V2 and now V3. In V2 in my display all show excelent in V3 i have some trouble. Some windows when opened have too large a font, so that not all the text can be seen. Since it is difficult for me to describe this, I am sending videos of these problems in the attachment. https://drive.google.com/file/d/1VdXrXP2WGGgV1uPYlheTWgw3ou1dw4NL/view?usp=drive_link https://drive.google.com/file/d/11jBAAh_ddc4ugc9XoQ3-TrBncUNJr2Cm/view?usp=drive_link https://drive.google.com/file/d/1U1WQF9SEnKhDkJIyhNoDobTcNP_ipC3V/view?usp=drive_link https://drive.google.com/file/d/1sWZes38V0vqCweGpOM7NyImCXUjFPhnx/view?usp=drive_link Finally, I have …

Pilot2ATC 3.0, early access v. 0.0.20 Today's flight: TFFF - TGPY (routing: TFFF/10 N0318F240 KISE2R KISES A324 DUSAL DCT TGPY/10) Initial clearance was for 6,000'. When I was handed off to Martinique Approach I was given clearance to flight level 120, however, before my co-pilot could respond, ATC started to speak again (presumably to nag me to switch frequencies, this has started happening a lot lately when ATC has a long message for me that includes a handoff.) My co-pilot cut off the second ATC tx to respond to the first one, but all of a sudden my assigned altitude is 7,000' instead of 12,000'. Also I get notice to expect the RNAV approach to rwy 10 (at TGP…

V3 0.0.20 XP12 ATC initial contact gives me a report of QNH 33965. P2A crashed during flight, and I had to re-start it. Not sure if this has anything to do with it? Regards

Thought I had a problem with latest P2ATC update, but it seems it's to do with Zibo mod? Cannot get any comms working. Even if I select a frequency from the FREQ table, the comm frequency is not set in the standby window. Not getting any chatter or response from ATC. Anyone using this with Zibo?

I have a Navigraph subscription, and followed the video QuickStart-First Flight to convert V2 Navigraph data to V3. But now it takes more then 3 minutes to load Pilot2ATC V3 ( EA0.0.14 Navigraph 2410 ). Any idea what it could be?

Hi, in this last 10 days i haven't do a single flight with V3, always use V2 after bugs, V3 doesn't work for me, last version tested 0.14, i open this topic for leave some log if you can check. No traffic with Traffic Global and WT on XPlane12 (on V2 show), CTD when i press to show on maps traffic always, today no response for ifr clearance, same station answers other questions instead but nothing for clearance, very slow to validate flight plan or to connect to simulator and cause sometimes CTD, sometime cause me freeze Xp12 every 5 seconds, disconnected and reconnected and no freeze. I hope this logs in the spoiler can help to fix some problems, some part…

Hi Dave, as mentioned in another topic I have some problems to complete my first test flight from AYKM to AYVA ! Normally I create a flight plan with Little Navmap, which I did this time too. Here is an IFR flight plan for testing: Spoiler <?xml version="1.0" encoding="UTF-8"?> <SimBase.Document Type="AceXML" version="1,0"> <Descr>AceXML Document</Descr> <FlightPlan.FlightPlan> <Title>AYKM to AYVA</Title> <FPType>IFR</FPType> <RouteType>LowAlt</RouteType> <CruisingAlt>2500</CruisingAlt> <…

I was able to import the taxipaths but not the gates. Is it possible that this is not yet supporte in v3?

Climbing to cruise and centre started telling me QNH and instructing me to descend >>>

I made a 4 hrs flight (MSFS2020 / Fenix Airbus A320) from efhk to lepa and made the following observations: 1. To get the chatter, I had often to disable and enable the chtr box after frequency changes 2. The AI Traffic (AIG Traffic Controller) was active at EFHK but freezed once airborn 3. Weather seems not to be transmitted to v3 (I tried NOA and Rex Weather Force). In the Info tab for LEPA the weather was all the time 00:00 Z and no weather information available. 4. The import of taxiways and gates not possible via MakeRwys, i.e. the import will not start eventhough the path to MakeRwys is correct. 5. I did not figure out how to put the UI in w…

HELLO My xplane crash i start it re enable midle fyght then open pilot2atc import flyght, validate, file, but no atc for clerance... search all radio coms even clear deliver, clerance, no option for clerance Best Regards

I've been using P2ATC, v. 2 for over 3 years and I just installed Version 3. Everything seemed to be working fine but I found out that the latest AIRAC is not used in flight plans I entered. In Navigraph FMS manager, the Addon Mapping shows Pilot2ATC pointing to the existing Pilot2ATC_3_x64 directory and the Addon List shows that the latest AIRAC revision (2410 rev 1 as of today) has been downloaded (green background) for Pilot2ATC. Avitab in X-Plane 12 and LittleNavMap show the latest Jeppesen plates versions, but P2ATC shows outdated plates. I understand this issue has already been reported but I was under the impression that it had been rectified. Am I wrong? The…

Departing from a busy airport YMML. I was kept holding short for inbound aircraft. I set my AI Traffic Separation for 30 sec thinking I am bound to get a Take-off clearance. I use Live Traffic plugin and it was showing inbound separated by about 4-5 miles. Finally I just took off and ignored P2A. I have emailed log and screen image to Admin rgds

@Dave As a long-time P2A user, I downloaded the new version 3 today. For now as a trial. Congratulations on this work; everything looks great. Unfortunately, I now have to report a problem: After starting the program a few times, it now freezes. Even when I start it as administrator. I have no idea why. What could be the reason? Or what can I do about it? Thank you in advance for your always very quick help. Regards ikarus6

Hi, I receive from Pilot2ATC v3 EA 0.0.15 NG 2410 on the flight from EDDW to EGKK wrong ATC Centers. Image below shows Anchorage Center And here it is Havana Center Don't know how to add the log file. As far as I can see it, no error messages shown. Thanks for your help Bruno

Another vanilla XPlane flight - KATL-KCLT imported from simbrief. Every ATC interaction perfect until I passed TOD and entered the STAR without any ATC contact. Chat stopped playing as well. The log file does not contain the ATC interactions where I asked for enroute descent and also contains exceptions. At 09:46 I refiled the flight and got approach vectors when I asked to switch to approach and asked for the specific approach. So, anything that went wrong is before 09:46. Spoiler 2024-10-03 09:00:48.2507|INFO|Pilot2ATC_3.ViewModel.MainWindowVM|Program StartedPilot 2 ATC (P2A) - version 3.0.0.0_EarlyAccess 0.0.11 10/3/2024 9:00:48 AM 20…

Restarted the program while at cruise, revalidated and refiled. Tried initial contact. ATC keeps responding "Aircraft calling Jacksonville center say again with your call sign". ATC was perfect with this flight plan up until climb when I had to terminate the program. Log only shows my ATC messages but never the ATC response above: 2024-10-06 10:37:52.0099|INFO|P2ADataLinq.ATCListener|Initial Recognized Speech: Center BLUE STREAK five six five eight At Flight Level Three Six Zero 2024-10-06 10:37:52.0414|INFO|P2ADataLinq.ATCListener|Handled Recognized Speech: Center BLUE STREAK five six five eight At Flight Level Three Six Zero 2024-10-06 10:37:52.0414|I…