Pilot2ATC Bug Reporting Forum

Not had any luck with using my voice for a while, so been using the CLICK option... that has stopped working in 0.2.2... I am selecting IFR Clearance etc.. ATC does not respond...

I've noticed that when I request a step climb — asking ATC for a higher altitude while cruising — instead of replying with "denied" or "approved", they just respond with a generic "good day", "good afternoon", or "good night", etc. Below an example from my last flight: TAM Eight One Two HEAVY Contact Brasilia Center on 123.850 ~ Center on 123.850 TAM Eight One Two HEAVY TAM Eight One Two HEAVY good evening . TAM Eight One Two HEAVY request climb to FL 410 TAM Eight One Two HEAVY good evening <== ATC not replying correctly. Any tips?

I've repeated this twice now, once with 0.1.4, and again with 0.1.5b...during the departure immediately after contacting departure, I get a climb to FL140 and a freq change to 136.4, then immediately after ATC gives me another freq change to the approach freq at my destination over 500 NM away, and it gives me a descent and starts vectors for the approach despite my having barely started my climbout. If I click on the APPR button, it shows the yellow course line from my present position all the way down to the radar pattern at the destination. Log follows--the fun starts at 17:35:48 in the log: Spoiler 2025-04-13 17:02:47.0376|INFO|Pilot2ATC_3…

Hi Dave, I am still using your version you send me 0031f. AI traffic and sector handover is not working as it should in version 021. I hoped that the latest updates would fix a lot of those things I can test updates for you, regards Wim

Now my first short VFR flight after the update and what I observed: Got a loop between ATC and copilot: ATC (white) > Skyhawk Zero Charlie Papa Visual Straight In approved. Call 5 mile final for Runway 35R (yellow) > Cleared for Visual Straight in Runway 35R Skyhawk Zero Charlie Papa Copilot (green) > Cleared for Visual Straight In runway Tree Five Right Skyhawk Zero Charlie Papa ATC (white) > Skyhawk Zero Charlie Papa Visual Straight In approved. Call 5 mile final for Runway 35R (yellow) > Cleared for Visual Straight in Runway 35R Skyhawk Zero Charlie Papa Copilot (green) > Cleared for Visual Straight In runway Tree Five Right Skyhawk Z…

I didn't run P2A V3 some time, now today, I got an appcrash each time I start it, a reboot didn't resolve the issue. It may be related to Windows 10 22H2 or DOTNET updates in the last weeks. Windows event viewer shows me two consecutive error msgs: 1. Application: Pilot2ATC_3.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.ArgumentException at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean) at System.Windows.DependencyObject.SetV…

I have made a few flights with V3 0.1.5B trying to get familiar with the changes from V2. All of the V3 video tutorials show the flight plan as a magenta line, but whenever I create a plan it always shows as a dark blue line. I think I am doing something wrong because during my flights even though I am following the blue line, ATC always says I'm off course and vectors me away from the flight plan line and towards the destination airport. Any ideas on what I may be doing wrong to cause this? Thanks.

During starting, app hangs up more than an hour. After more than an hour it automatically closes. Then, after it closes I start the program again and it returns to normal. I already tried reinstalling it several times, but it still hangs up during the first start.

Hi, I'm trying out this magnificent app in its trial version and I'm enjoying it. It took me a while to install on Windows 11, but I'm very satisfied overall and how compact it is, and apart from the ATC service, all the accessories it includes and helpful in the flight. I just have a question: is it possible to overlay Navigraph charts on your P2Av3 map? Especially the SIDs, STARs, etc., because I've occasionally been told they're not available in the aplication and its compatible with for example traffic globlal or another Traffic add on xp12?. Otherwise. very good work. Mostrar menos

Just had a new Navigraph AIRAC update. P2ATC still not picking up the latest update so trying to use the conversion tool. P2ATC just crashes when clicking on "Data Mnt" 😕

Not even reached TOC and I just got approach information for destination, then descent instructions... 😛

Dave, Since one of the recent updates of V3 the program loads without taxiway and runway information . The "show" function in data management shows only the map. The result is that the taxi-instruction is limited to "taxi to runway xx" or "taxi to gate xyz" (btw gate information is loaded). I can load taxiway information of saved airports but to activate them I have to restart the program and everything is lost again. I noticed that when I load saved taxiway information of an airport the pop-up is looking for a filename ICAO_Taxiways (filename used in V2) where the airports are saved as ICAO.txl. Maybe this is an indication of where the problem is. I…

This was with 0.1.3 I get multiple back to back instruction by Approach, which is difficult to memorize. at System.ThrowHelper.ThrowInvalidOperationException(ExceptionResource resource) at System.Collections.Generic.List`1.Enumerator.MoveNextRare() at P2ADataLinq.FlightStateMgr.CheckActiveTriggers() 2025-04-20 11:41:35.0429|INFO|P2ADataLinq.Speech.SpeechMgr|AudioInterrupts: 0 in UnInterruptAudio 2025-04-20 11:41:35.0429|INFO|A.c0a0e4f0f922705579dcca7063389a951|Copilot Speaks Response: ~ Descend via the GUERA two arrival with the GUERA transition to seven thousand feet . Altimeter three zero zero niner DELTA Seven Three Niner 2025-04-20 11:…

As title, Traffic Global now showing, everything is set-up correctly.

I closed the program and yet continued hearing chatter. Opened Task Manager and there were two instances of the program running. One had 515 mb, the other had 60 mb. Right clicking the shortcut does not show a choice of 'close window' If I then click the shortcut the program opens normally. When I click to close the two shards remain.

As above. You have to use the App-Dep Procedures button...

No comms at all 😕

Hi Dave, installed new update 1.53B: IFR flight section handover seems to be ok now, No AI traffic inserted in P2A anymore, PSXT on or off does not change anything Weather reports (at destination airport) is not working anymore. Your email adress should pass my email rules now, regards Wim Newest XP12 update 12.2.0-b2 with Zibo V4.04.39 System I9, RTX4090

Hi Dave, some time ago I got from you EA31F which worked quite good with XP12, now there are new updates to 0.1.4 I installed these versions but they work with PSXT traffic and no longer with the P2Alink (which in these version have no installer) this version makes a mess af the section handovers and does not alert on traffic, however the AI is visible on the map, settings are ok so yhat is not an issue.

When I try to input approaches Early access 0.1.3 shut down.I'll try several times every time shut down.

@Dave I've been a user and fan of Pilot2ATC for many years. I'm currently using version Pilot2ATCv3 Update_EarlyAccess_0.1.2 (Windows 10, X-Plane 11). Occasionally, a problem arose, but the excellent support team was always able to resolve it. Now I have another problem that I haven't been able to eliminate despite numerous attempts: Up until and including takeoff, the dialog with the controller works perfectly. Until now, I was assigned to a new frequency after takeoff. But now after takeoff, ATC remains silent. A radio check just says I'm on the wrong frequency. But I haven't received any new instructions from ATC. I don't hear anything from ATC for the rest…

The last hours, updated P2A V3 to 0.1.2 and did a VFR flight. My observations: Voices -> Radio Sound Effects -> Enable Background Noise: voices send correctly to my USB headset, but the noise is send to the speakers (maybe not always as after one of the many restarts I think, I heared them in the headset). Clearance delivery didn't like "Radio Check" (spoken by me but even by "Speak" button): "... appears you're on the wrong frequency" Validated and filed VFR flight plan between small "INFO" airports. Now "RADIO acts as ATC" delivers more functions (not as much as P2A V2), but doesn't handle all of them. "Ready to copy VF…

Hello Dave, I am very happy to notice a clear improvement in the understanding of my terrible accent since EA_0.1.0. However, I have noted the following three cosmetic issues: I & II - Empty actions regardless of the option chosen. III - A small typo that is not critical but, I must admit, slightly obsesses me. Kind regards (Windows 10 - RAM 32Go - GPU nVidia 16Go - Xplane 12 - Pilot2ATC v3)

Good morning, Dave, I am having troubles using Pilot2ATC in a specific computer. After a quite troublesome installation of English language pack and voices, P2ATC is connected but does not tune any radio frequency and any input does not seem to make any change. Also, when swapping or setting it to COM1 it automatically goes back to COM1. I have tried the program in a different computer during the free trial period and seemed to work fine. I assume it was because of the language settings. However, now I have the same config in this computer and something is working differently. I attach a picture of the radio settings. It is not connected in the pictu…

Pilot2ATC 3 CTD when I select App-Dep Procedures ? Arr-STARS. DEp-SIDS OK