Pilot2ATC Bug Reporting Forum

I did a full flight of four hours got to the Destiination airport taxi to the gate that they gave me but when I went to see how many hours I got on my logbook I didn’t get any but when I take and and flew and taxi to the gate Microsoft flight Sim and went to their gate it was saved is it just me having this problem or what

I had a couple of problems with this flight taking off from EGGW runway 25 in p2a runway 26 shows as runway 25 and runway 8 shows a 7 when i tried to change them in Taxi Mnt after a p2a restart it was showing 4 runways instead of the 2 and on requesting taxi it told me to goto runway 26 but directed me to go via runway 8 and cross over it there is no crossing point and no taxiway on the other side Taxi mnt showed the same no taxi route there (taxiways have been updated using makerunways 5.13) is there a way to change the runway numbers to make them match real world? the other problem i had was the approach to EGNS i was told…

When trying to get the active runway at KYNG it hangs. Not sure how to attach a file here. It also looks like KLNN has the same issue. Thanks Bill

Problem Description: When I report ready to Taxi, P2A either does not answer the request (and stops responding to requests) or gives no Routing (just says "Taxi to Runway 08 Right" for example). ( In the first Case, there is an Exception happening at "TaxiPath.get_RwyName()" ) Occurrence: Seems to be related to the Position of the Plane when doing the Request. For example when starting in P3D/EDDF from Gate A17 (ready to Taxi on N5), P2A stops responding every time. When I request Taxi from N8 it works normally. When I tested in EDDM (P3D / MSFS), P2A either did not give a Routing or worked normally. Here the Trace-Files: https://www.mediafire.com/file/zepcu9v…

Since about two updates ago (using beta), the traffic on the Map is the wrong color 95% of the time. Usually, blue even though it is air born and seeMs hard to hover over and get stats. Not sure if a setting got changed, but don't think so?

Hello, I am a new flight sim user as well as a new Pilot2ATC user. I am trying to learn as much as possible when it comes to ATC communication. I would like to be able to queue up my mic and repeat "or confirm" the last ATC message that's displayed in gold, rather than it doing it for me. I have tried turning off co pilot responds to radio / co pilot changes frequencies. This turns off the audio portion of him responding, but the gold text is still there, and if I try and repeat it myself, I get an error from ATC. Any help on this topic would be greatly appreciated, as I'm preparing to go to flight school and train to be a commercial pilot :)

if i go to config and setup call sign type airline airline lookup if i put in baw for British Airways it dose not come up with anything it used to come up with speedbird not sure if this is broken in the latest beta i am using 2.6.3.2 beta 5

Hi Dave I purchased P2ATC and has been working fine. Certainly the software doesn't allow me to file a file plan although It can be validated. You will see on the screenshot that P2ATC is connected but the connection button remains grey and the icon of the plane is no where to be seen. I have updated AIRAc using Navigraph FMS Data Manager, downloaded your latest version of P2ATC and have updated XUIPC (the latter cannot be a connection issue because I can connect other third party software and plugins using XUIPC). Any help would be appreciated.

If I import a flight plan from Simbrief, Pilot2ATC constantly stops responding during the flight. This has happened on the past few flights where I have used Simbrief to plan. Other methods like importing a plan that was set up in MSFS2020 work ok.

I am running P2ATC version 2.6.3.2 Beta 4. When I launched it today, the map has several squares on it that say "Exception: The remote server returned an error: (418) Blocked. We are sorry, but we dont have imagery at this zoom level for this region." I have never seen this before. I didn't change anything in P2ATC, and my internet connection is good. I tried zooming all the way in and out, but the error messages are still there. Any ideas on what may be causing this? Thanks.

I fly a virtual airline and I was scheduled to arrive at KDEN Gate B89. This gate is listed in MSFS correctly, however Pilot2ATC shows this being gate 55 or something like that.

Pilot2ATC does not import altitude from the following flightplan. It seems that .000 in the <CruisingAlt> tag is treated by the program as invalid data. Full flightplan I used: <?xml version="1.0" encoding="UTF-8"?> <SimBase.Document Type="AceXML" version="1,0"> <Descr>AceXML Document</Descr> <FlightPlan.FlightPlan> <Title>EETN to ESSA</Title> <FPType>IFR</FPType> <RouteType>HighAlt</RouteType> <CruisingAlt>28000.000</CruisingAlt> <DepartureID>EETN</DepartureID> <DepartureLLA>N59° 24' 48.00",E24° 49…

Most of the time when I close the P2A Configuration Window some combination of "Respond To Radio" and "Change Frequencies" get selected weather I selected it or not. Also sometimes "Respond To Radio" unchecks itself. I'm running the most current stable release that I did a clean install on my removing any Pilot2ATC directories in "C:\Users\username\AppData\Roaming\ and re-installing from scratch.

Pilot2ATC keeps giving me unwanted approach vectors with the following settings enabled in the Flt Pln tab: ATC assigns SIDs ATC assigns STARs ATC Assigns approaches Force STAR assignment The rest of the setting are unticked. I load a flight plan into my ATC, start flying it and a little bit before decent it informs me of the the STAR to expect. I input the STAR, start flying it and sometimes ATC informs me I am off course and need to follow heading X to return to the route without STAR. (I ignore that when it happens). When I am at towards the end of my STAR it suddenly starts giving me vectors rather than letting me fly the approach whic…

import IFR flight plan validate File Request clearance, receive clearance with wrong runway (this is fine that it's "wrong", but i want to request a different runway) Request taxi and get taxi instructions to "wrong" runway (expected) Me: "<Callsign>, request departure runway 05L" ATC: This is ground, you need to be on Clearance delivery" Change radio freq and repeat step 6 above No response from Clearance This is with latest public beta. Alternatively, if you DO successfully get a runway change request from clearance, my taxi instructions are still to the original "wrong" runway. I will try to get so…

This is getting to be worse than the sim itself if that's even possible. I just installed the latest update (from 6/18) and even though it says I'm connected to the sim and all lights are green, I'm not getting a thing from P2ATC. Dead. Will not change frequencies or nothing. It's getting old. Earlier the sim was broken and couldn't fly and now P2ATC seems to be broken.

Dave, Love the sim brief import. Thank you so much. But while your at it adding features. You think you could add com 2 in? I would love to be able to monitor the weather on com 2 like I do in the real world. Thanks so much for all you do

AIR CANADA Two Zero One good morning . Radar Contact. AIR CANADA Two Zero One Expect the STAVE Eight arrival for the ILS approach to runway Two Six Left at VANCOUVER International . AIR CANADA Two Zero One Descend to cross BOOTH at Flight Level One Eight Zero then Descend via the STAVE Eight arrival to Flight Level Three Eight Zero. I keep getting descent directions that are my cruise altitude. I was at FL380 and ATC says descend to cross booth at FL180, but then says "to FL380". Did i misconfigure something? Descent was STAVE8 via BOOTH to CYVR/26L (using latest public beta from 6/6 )

I just updated from 2.6.2.3 x64_R2 to 2.6.3.1 x64 (from the website) I have reviewed the installed directory but was unable to find an update log. Can anyone provide a list of modifications between these two builds? Thanks

Hi Dave, Not sure if you're able to offer some assistance in relation to whats going on here. P2ATC just not giving me a clearance. Its recognising voice (or Sayit) but just responds with ASSIGNED CTRL:EKCH CLRDEL 119.90 Tried a reset of the program but no joy. The flight plan validates and is filed. Any ideas? Spoiler Program StartedPilot 2 ATC (P2A) - version 2.6.3.1_x64 06/11/2022 13:14:37 Windows OS: Microsoft Windows 10 Pro Version: 6.2.9200.0 Platform: Win32NT Memory: 34300735488 Trying to create DB_Dyno. DB_Dyno created successfully. Init 15% done. Trying to create DB_Base. DB_Base created…

Hello Everyone, Maybe someone can help me with the following issue: I tried to use Amazon Polly voices, but they were not really reliable. So i decided to buy 5 Voicec from CereProc. After installing them in P2ATC (V2.6.3.1 Public Beta 2) everything went fine. After the flight i shut down my PC and on the next day i tried to make a flight. I started P2ATC, filed a plan but now voice was coming out of the speakers. I shut down P2ATC and restarted it, than it worked. Today, the same game: I started P2ATC but the voicec were not giving any tone. So again, restarted P2ATC. I checked if the voicec are speaking, ans as this was the case, i started a flight. But now EVERY S…

Although I'm sure some of them are self induced but I'm really not sure what's going on. MSFS 2020, PMDG 737 Running 2.6.3.2 First of all I can not get the FP to match Simbrief without a struggle. I'm having to change many waypoints and runway assignments. This has been going on perpetually, regardless of the options selected in config setup. Last flight from KSEA to KPDX was a mess. I did finally land but no thanks to P2ATC. It changed runway assignments on approach then vectored me all over the place. Telling me to descend to 2400' when I'm already there (this went on for 15 minutes) then telling me to climb to 4000' when I'm on final. Thinking…

I'm using the Amazon Polly voices. I confirmed at startup that they are working as they should, but during different calls, the voices that activate (random selection) are cutting out early. For example: Controller: Southwest 3027, Climb and maint-- Me: Climb and maintain Flight Lev-- Controller: Southwest 3017, Contact -- Me: Contact Center on-- Or they stop working entirely, despite not changing to a different controller (my copilot voice will come and go as he pleases). Amazon services bugged? Too much strain on my system? Bug within MSFS2020? Combination of all, or none? Very weird. I don't get an error that the voices are unable to be u…

I recently reinstalled/rolled back from the beta to the most recent non-beta release and my COM1/COM2 toggle graphics are now just white boxes with Red X's in them. Do I have something corrupt with my install?

Good evening Dave, I know a few other users have posted that they have had P2A freeze on them when being handed off to approach and that is typically when the calculations are being done for the vectors. I have not had this happen previously but did today using the latest version. In my instance, I was connected with Center as there is no tower, as I approached TOD P2A froze, but not completely. I could not interact with ATC, or manipulate the program in any manner however the ATC Chatter continued to play. If I changed frequencies in the virtual cockpit, the ATC chatter would actually change to the appropriate controller so P2A is seeing that I made a cha…