Pilot2ATC Bug Reporting Forum

I am using the latest build and I am seeing ATC center (only) give me a freq say 133.4 and as I am changing it I get another one say 128.1 I do respond when ATC ask me to change and that always works with no message back from ATC. This started happening in he latest build. 2.6.3 beta 3

I'm being handed off to center controllers pretty quickly on my flight KMDW >> KLAS. I have AI responding and changing radio frequencies checked in the settings, which worked for a bit, but now he will respond but not change the frequency. I have to tune the radio manually and flip them to active, and then he responds after. I'm using the PMDG 737 + MSFS2020.

COPILOT: LUFTHANSA One Zero Niner Eight Inbound At Flight Level Two Six Zero Request RNAV Approach to Runway Three Two Left; ATC: LUFTHANSA One Zero Niner Eight Radar Contact. Cleared direct to NARAK to join the NARA6I arrival with the NARAK transition Expect the RNAV approach to Runway Three Two Left at BLAGNAC ~Expecting the RNAV approach to Runway Three Two Left at BLAGNAC LUFTHANSA One Zero Niner Eight COPILOT: Expecting the RNAV Approach to Runway Three Two Left at BLAGNAC LUFTHANSA One Zero Niner Eight; ATC: LUFTHANSA One Zero Niner Eight You were garbled. Please say again. (Repeat your request. Your phrase was not recognized. LUFTHANSA One Zero Niner Ei…

When I am at or higher than 10000 feet set in atiltude, ATC wants me to slow down to 250kts or slower. It varies but also always does that at 10000 feet. Once I am at 18000 it never does that anymore. This has been this way for a while, but I thought I would just bring it up

I have newest Version of Pilot2ATC and FSUIPC and when I start MSFS with the Fenix A320 it connect but have not Aircraft Position and show this Windows

I imported a .pln with the DEDKI5 departure R05 out CYYZ and the P2A navlog shows the waypoints of this SID. When I get my clearance, ATC gives me the BOMET8 departure off R33R as the winds have changed, however it does not change the SID and runway in the P2A NAVLOG itself and when I fly the departure I get a vector to a waypoint in the DEDKI5 departure instead of the BOMET8 in my clearance (and programmed in my FMC). Do I also have to manually update the P2A navlog to "sync" with what I got in my ATC clearance? It sounds like this should be done automatically and might be a bug. Thanks LOG: https://www.dropbox.com/s/3937ws2j3623f3n/P2A_2020_log.zip?dl=0

Hello, I'm fairly new to the program so I'm not sure if that's a bug or program limitation, but when flying EDDM NAP26 approach transition in MSFS, I did not receive vectors to ILS after DM459. I continued as instructed by the chart for a while, but eventually turned back after 10 or 15 nm and the ATC communication resumed automatically when I got near the IAF. Here are the logs: https://easyupload.io/yupo5b

I dont recall this being an issue in the past (at least not before filing a flight plan). In the recent betas, I cannot change my callsign without exiting and restarting the program. Not sure if this is a bug or design intent (hope its not intentional.)

Hi here is part of the flight-plan from EIDW > ELLX. ATC directed me to RWY16 😕 <?xml version="1.0" encoding="utf-8"?> <SerializableFltPlan xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <SerializedSIDPlan> <AirportIdentifier>EIDW</AirportIdentifier> <Name>PESI5G</Name> <RunwayName>RW34</RunwayName> <EnrouteTransitionName>PESIT</EnrouteTransitionName> <RunwayTransitionSIDId>0</RunwayTransitionSIDId> <CommonRouteSIDId>3768</CommonRouteSIDId> <EnrouteTransitionSIDId>0…

Hi, I have been using Pilot2ATC on my PC for almost 2 years and suddenly when i launched it today i am not able to use it where a pop up box is saying "License Activation failed". I re-entered my activation key and email and it wont activate. Do i deactivate it and reactivate it with the same activation key? Appreciate your help on this issue. Thanks. Cheers, Sherwin

Have a strange issue that appears to be Pilot2ATC related where I lose ability to type "z". Note that upper case "Z" still works. 1. I create and open a simple text file using Windows notepad. 2. I start MSFS2020. As part of that process, it automatically loads PSUIPC 7. 3. Switching to notepad, I can enter "z" fine. 4. The I run Pilot2ATC and while it is still initializing, notepad is fine. 5. Once P2A is functioning, going to notepad, nothing happens when typing the letter "z" . However typing upper case "Z", it works. 6. Close P2A. 7. Notepad now accept "z". NOTE: 1. I am using P2A beta 2q. 2. The lack of ability to e…

Hey Dave, Still seeing an ongoing issue with vectoring being given way late, or not at all. Will get "expect vectors to the ...." part way through the flight which seems early. Will hit what P2A Calculates as TOD and no descent instructions given (in previous versions if I recall, once that point was hit it would start the descent instructions). Then it will just let me carry on without ever giving me the actual approach or assigns it really late and it's dive and drive. Let me know if you need some more logs but still seems to be off with vectoring and approaches. Thanks.

Hello Yesterday i add some voices in Windows i can see them in Pilot2atc but when i connect to the sim I have no power on radio so ATIS dont start. I use the 2.6.3.0 Public Beta 2q 04/28/2022 This happens in both Toliss A321 and A340 Program StartedPilot 2 ATC (P2A) - version 2.6.3.0_x64_PublicBeta2q 05/10/2022 06:58:05 Windows OS: Microsoft Windows 10 Home Version: 6.2.9200.0 Platform: Win32NT Memory: 34281037824 Trying to create DB_Dyno. DB_Dyno created successfully. Init 15% done. Trying to create DB_Base. DB_Base created successfully. Application frmP2AMain starting 05/10/2022 06:58:37 Loading Joysti…

Hey Dave, This started awhile back but I never really clued in. It seems along the way in the Beta's that the randomization for the controller voices draws from the same pool. I have 13 Cereproc voices, all are loaded in and I have it set to randomize. However, it now only seems to continuously use the same ones. It is random, but rather than drawing from the 13, it seems to pick from the same 4 or 5. Thanks.

Hi, I´m using beta 2p. When taxiing to rwy 25 ATC says: "Taxi to Rwy 25 via taxiways Foxtrot-Delta-Sierra-Alpha. Hold short..." The Delta is wrong. You only need Foxtrot_Sierra-Alpha. How can I put in a screenshot in this report? Thx and regards buysellzer

Yesterday I was at New Orleans KMSY north of runway 11. My taxi from ground was RWY 11 via G A E hold short of RWY 11 hold short of runway 11 I taxied G A and held short at RWY 11 to cross it. I contacted ground with call sign saying holding short at rwy 11 at A. ATC said contact tower for taxi instructions (a little odd) When I did Tower said contact ground. This was a loop back and forth. So I crossed R11 and continued on echo on Ground Freq. I contacted tower and was cleared for departure. I did not have the transmission log saving so that would have helped. I will include a link to that next time I am using the latest build but have seen this i…

I just upgraded my PC with two tadeonal memory sticks and now get an invalid license message when trying to start the program. I tried using the popup reregistration and it returns a server error message. I have messaged the admin for pilot2atc, but have received no reply. Any suggestions on what I can try next?

Hi This is what I get from ATC: "TURKISH One Niner Niner Eight Descend to cross RILEX at Flight Level Three One Zero then Descend via the RILE Two November arrival with the RILEX transition to cross SADIK at or above QNH is One Zero One Two at ISTANBUL" Data missing it seems?

Ok so I want to explain what I did and (what I expect functionality-wise) and hopefully I can get some clarification on what I'm doing wrong 🙂 Created simbrief plan and imported it as: KJFK/13R DCT SHIPP Y492 SQUAD DCT DARUX L459 DASER MOMOM1 TXKF/30 Upon checking ATIS (and real KJFK D-ATIS), the actual departure runway was 4L. I made that change in the P2A flight plan, used "Force Dep Rwy" and made sure to File: After step 2 above, I requested clearance from clearance delivery, but received: "...cleared to Tango X-Ray Kilo Foxtrot, fly the DEEZZ5 departure , with the DEEZZ transition , then as filed. Expect…

Hi - used Pilot2ATC older version, Version 2.5 I believe on Windows 7. Upgraded to Windows 10 and downloaded latest version 2.6.1.1_x64_R3 with Navigraph Data and now cannot get Pilot2ATC to start. Get screen with aircraft then screen showing inside cockpit with Pilot 2 ATC - Loading Data - Please Wait. Get 2 Error screens 1) sqlserver.exe - Application Error "The Application was unable to start correctly (0xc0000142).Click OK to close the application 2) Database Error - The underlying provider Failed on Open. "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not a…

Hi, First I'd like to say that Pilot2ATC is a wonderful program, but it has something that hurts me at every flight : it understands "eight" instead of "gate" ! It is literally impossible for me to get a gate assigned when landing at an airport (without setting the parking brakes and opening the program which is really killing the immersion). I know there is already a topic about this, I tried to set speech recognition to recognize "gate" and "eight" as advised but this didn't help a lot. In real life, does the pilot has to ask for a gate when landing at an airport ? When I fly on Vatsim, the controller assigns me to a gate automatically. Is it possible to add …

running windows 11 and beta n in windows sound setting pa2 is at 100% in p2a all random voices are at 100% and when tested are loud but when they talk to give instructions they are really quiet any suggestions?

This route was a little off.... EGBB/33 DCT HON UL612 MID L151 SITET UN859 SOPIL DCT BALAN DCT EVPOK DCT NARAK DCT GAI DCT LOMRA DCT ROCAN DCT IBRAP UN13 LORES LORES1R LEPA/06L https://drive.google.com/file/d/1tg3dU2zCsIpANBTvfsx5yhSYFjSqbWMZ/view?usp=sharing Pic

Hi, I downloaded the newest beta. Now I did not get any takeoff clearance, no matter what I tried. No idea what went wrong? Seemed like a lot of things bugged out. Can you have a look? The previous beta was great... I sent you the log file as an email. Thank you, Raphael EDIT: Apparently you just published a new beta... will try that. EDIT2: Alright today's beta worked fine.

Hi I installed the trial program and then forgot about it and now I want to purchase it but I cant find a link to buy it?