EMB505 Phenom 300 HD Series for FSX | P3D

Recently installed a fresh copy of P3D4 along with the Phenom 300 and the Navigraph Extension. Bird loads fine and flies fine. However, any time I try to enter a flight plan, after entering the waypoint and hitting enter, I get a CTD. Anyone encountered a similar issue? I've installed the Carenado Meridian along with its Navigraph expansion and that operates flawlessly without any CTDs.

lads i need help. currently i have fsx se however im sick to death with the OOM so ive purchased p3d v4. i was wondering if i had to purchase a separate license for both simulators like pmdg or is it one purchase for both simulators like orbx thanx

Hi all, A little strange, Seems that the engines kept cutting out for no reason and when i activate the APR on the autopilot it noses dived, Any ideas?? Maybe the Saitek controller / SPAD but thought i check here first. Cheers Neil

Why do I get a wheels up alarm when I take off and put up the gear I missing something

I have pollypot GIT, but can't seem to get the 300 to recognize. Any suggestions?

I have been trying to input a flight plan but been having issues. I installed the most recent airac cycle and the G1000 shows it when it loads up. I can input waypoints but I can't choose any departure procedures. For example: I was at KSEA and when I hit proc button all there is to highlight is select approach. I know there are SIDS at the airport yet it won't pull up on the G1000. It seems glitchy to me. I can hit the procedure button when in my flight plan and nothing loads until I am out of the flight plan page. Any help would be appreciated. I read about the navigraph issue from the expansion pack but I seem to have no issues with mine loading. All the VOR,…

Hi all P3Dv4 and the Phenom300 v2 Modified the Phenom300 with the newest version of Bert's Mods as of this writing. Altitude selector should change by 1,000s, right-click 100s, but sometimes it changes by 10,000s, right-click 1,000s. Can't seem to find any rhyme or reason why it does that. Anyone else experiencing this? Doesn't seem to matter if I load the Phenom300 directly or load a default plane and then switch. I'm wondering if one of the default Carenado gauges is interfering with a Bert modified gauge. TIA for any suggestions.

I just tried to create a FPL from KFAT to KMFR (Rogue Valley) and after entering the arrival airport all information regarding a STAR, transition, or runway was missing! I tried entering a couple other airports i.e. KLGB KMRY and they displayed airport information. I just recently installed the navigraph update and the latest EMB505. What am I doing wrong? I just checked my Programs and Features (add/remove programs) and it shows the following: EMB505 V2 FSX/P3D version 1.0 EMB505 NAVIGRAPH FSX/P3D version 2.0 Could someone please verify that these are the correct entries for these products? I am using FSX on Windows 7. Thanks for your help! …

Does anybody use the G1000 with navigraph?? if so, Can you enter a flight plan? Can you save the plan? Can you select an arrival and have it enter the plan in proper sequence? Can you enter an airway? If so, What is the code for the USA? I have no problem with the Flight 1 G1000. I can't get any of the above to work with the Carenado.

http://www.carenado.com/CarSite/Portal/index.php?accion=product&correl=155 Just saw the announcement on their Facebook page as well.

The Carenado EMB505 PHENOM 300 HD for P3D has been released however i'm having problems downloading it, a network error fail, I assume that there is just too much traffic. Anyone managed to download it or having similar problems as me?

Hi I know it sounds stupid, but my PFD reboots everytime I use breaks and stop the plane. Is that a bug or just happens to me? I reinstalled and keeps doing it p3dv4 with phenom 300 v2. Carlos

I've had the 300 since it's release and had no issues. Everything worked as expected. The AP took some getting used to but it worked With this new version, I have some serious issues - Let's say I climb to 10000 feet. Engage AP and select ALT HOLD - this puts current ALT (10000) in MFD and SHOULD maintain the alt. But for me, when I do that, the VS bug goes up and the a/c starts a 10kn/min climb. Have they changed something? IS anyone else having issues with ALT HOLD? Thanx, Vic EDIT: must have been an initialization issue - hasn't failed since I posted. Gotta love computers! :)

Is there a way to control the taxi speed of this bird? I am finding that I have to ride the brakes constantly to control speed. I can easily taxi over 30 knots if I don't apply brakes! Is there a way to increase ground friction to get more reasonable speeds? Thanks for your help! Airbus

Hi, Dumb question, how do you engage the FD and AP? I'm in a stable cruise with a heading and attitude set, the FD/AP will not turn on. Thank you in advance. Bob Fixed. I was loading the plane from a non default one, works now as poor as usual for Carenado.

Now that you can update the default FSX/P3D AIRAC to the latest cycle, my question is whether Phenom 300 comes with pre-installed nav data, or can read what's in the sim? Thanks, Dirk

Looking for a small jet for pd3v4 and thinking of the phenom 100 or 300. I realize the 300 is not yet out for v4 but would wait if some of you think it is much better than the 100. Which do you prefer for fps, systems, and other things. Also want to install gtn 750 in either one.

Is the current release compatible with v4?

Hi I have installed the Phenom 300 before and the serial number had worked but because it is now compatible with p3d v4 I thought to install it with that but for some reason it thinks that the serial code is invalid. Does anyone know how to fix it.

CARENADO NAVIGRAPH EMB505 PHENOM 300 EXTENSION PACK FSX/P3D RELEASED. $5.95 for only for 10 days..... Special price. Go get it. Ray

Hi! Does anyone have PFPX profile for the EMB505?

I am really lost here. I have EMB 300 with Navigraph. Just ran the latest installers for P3D v3. I don't seem to have any nav data when I enter a flight plan -- looking at this tutorial video, I see the guy hits FPL ---> PROC and automatically his local airport appears. He then selects his departure and goes from there. Now when I do that, I get nothing. Cannot manually enter ICAO codes and cannot scroll through them. Could be my navigraph data is old, but hell, there should be SOME data in there, even if it is old and outdated. I also have the S550 Citation and the Hawker XP 850 installed, I will check those as well. I will tell…

I bought Phenom 300 with Navigraph expansion and everything installed but I have a major issue here: When I start the aircraft, I have that popup message saying the database is building, ok, its fine but on map the VORs, fixes, airport icao show without names, not sure why it's happening. I am using Prepar3d 3.2 with windows 10. https://www.youtube.com/watch?v=8ux0YIUwEZ0&feature=youtu.be

Hello, Just finished installing Bert's fine GTN750 mod for the Phenom 300, and it seems to be working like a charm. Thanks to Bert for his great work! One thing I have noticed is that I no longer have the ability to bring up the Autopilot/Altitude set/Vertical speed/etc. panel that was previously activated with Shift-3 key combination. Has anyone else experienced this effect?? Having this panel made takeoff prep & post takeoff activities easier, as I could just turn on AP, set up Yaw damper, and both horizontal & vertical navigation modes. A- is this something amiss with my install process?? B-If others are experiencing this, is it something th…

The ability to update Navigraph data is intriguing, especially for fields like KATL where the SID/STAR waypoints constantly change. Of course I can't do this with the F1 GTN 750 but it's a much smoother and realistic interface. Of the two, which would you suggest and why? Thanks, and Merry Christmas.