EMB505 Phenom 300 HD Series for FSX | P3D

Hi all, Can someone tell me the name of the FMC keyboard under which it is listed in the panel.cfg Thanks, Peter

How does one clear this CAS? I've tried pushing in and out on the oxygen button to no avail. Thanks.

Hi Does anybody have a template of the phenom 300 for Professional flight planner X? I´ve been looking around and airlinerperformance.net/ used to have one but not anymore. Thanks!

I am receiving this CAS (E1 FUEL IMP BYP) since batteries are ON, taxiing, taking off, cruising, until parking at destination. There is nothing wrong with the checklist, I receive the Ready for Takeoff before flying. I use the RXP mod for the GTN750, which is working fine. I know that CAS is telling me I have a problem in fuel E1, and BYP is bypass. My rig is W10 / P3Dv5.4 last HF. Any ideas?

I would like to enlarge the A/P panel in the VC so that it is the same height as the standby instrument next to it. The button above it for the illumination can be omitted. Any help will be gratefully received. Peter

Can't seem to get the audible altitude alerts to work. Have contacted Carenado. They said they would troubleshoot and get back. Carenado hasn't done so for quite some time. I have downloaded their "new" wave files and put them in the appropriate directory but still not audible altitude warnings. Any help would be most appreciated.

So, all of a sudden these two CAS messsages appear -- "EMB BRK LO PRES" & "HYD LO PRES". Doesn't seem to affect flying the plane that I can tell. So far just a nuisance. As far as I can tell all of the switches are set properly. But would be interested to see of if anyone has a insight. Thanks.

Hello All Reading many of the reviews on the newly released 300 and I too was surprised by the lack of work that was done on the autopilot system. I'm in noway a real world pilot so I'm not sure if the AP in the real 300 sucks the same way? Nonetheless; I'm wondering if one of the Wizkids on this forum is planning on retrofitting the GTN750 to the 300 VC. Bert and another gentleman made mods for the 100 and the Hawker 850. If anyone is planning on do the same for the 300, please let us know (I'm beggin' here....) Thanks

The Phenom 300 single and dual GTN mod is ready for testing. This is a rework of the GTN 750 mod posted on the Flight1 File Library system on January 2017, and includes a completely revised EIS gauge pages for Engine, System, and Fuel planning with all live gauges and real operating parameters and alerts. A dual GTN version is also included. Configuration panel.cfg options are provided for both Flight1 and RTX GTN modules. GTN MFD ENHANCEMENTS Two configurations options are provided for the placement of the GTN gauges in the MFD cockpit, a single GTN 750, and dual side by side GTN 750s. In the single GTN, the EIS gauges are displayed vertically on the left side…

I´m facing some problems since a couple of flights. I have changed nothing. I get the fltplan from Simbrief always rejectet from loading into the GTN. Then I changed the name from orign NCRG-NTAA to NCRG_NTAA (acc to the book) and then it was ok. Now the GTN rejected this format also. Only manual input possible Any tips? Peter

How do you enter the departure airport into the Phenom 300 G1000 planner? I type EGCC and hit ENTER but it goes in as the first waypoint. In the next field down it shows the heading and distance from (blank) to EGCC. 😠 The software is either faulty or the process is very strange. I consider myself reasonably intelligent but just can’t fathom out how it works.

Hi Guys. I'm brand new to the 300 and I've had a few issues regarding the installation. I have it working now but on the PROC display in the PFD, only the ARRIVAL option is active (Cyan) the rest are greyed out. I can cycle through the top two but the bottom two are not accessible. I've watched the FSMania videos and they are available in his PFD. I've re-downloaded the file several times, even using the email download but the result is the same. Does anyone have an answer for this? Any help will be much appreciated. Thanks...Kenny

I'm not sure what I'm doing wrong but whilst the engines spool up to 24.7 N2 advancing the throttles does nothing. N1% shows 7.4 with OFF against them both. What have I missed?

I installed the Phenom 300 to P3Dv5 (P3Dv4 installation with P3Dv5 patch), and to the best of my knowledge everything seems to have installed okay. Only problem I see so far is the Procedure page of the FMS can only show me Approaches (refer to video attachment). Every tutorial and manual I see indicates that I should be able to see the remaining 3 IFR procedures below the Approach function. Am I doing something wrong here? I should be to just press Proc > Departure in order to start my route, right? Check out the video and let me know if I am doing something incorrectly. https://youtu.be/me5qnnGEARE

I fully appreciate the Carenado aircraft are not state of the art regarding the flight model but they’re reasonable enough if the PC-12 is anything to go by. I have a Learjet 25 from Extreme Prototypes but the lights have a huge impact on performance. In all other respects it a nice enough aircraft bar the 1970s cockpit. I’m considering this Phenom as I love the G1000 display and that was the main reason I bought the Vertx DA-62. But that’s a pretty slow aircraft so what I’m looking for is the VC of the Vertx with the speed of the Lear. I have Aivlasoft’s EFB from which I can generate flight plans so the lack of recent Nav data in the Carenado isn’t a …

Hi everyone, I did a Google search but I couldn't find an answer to my problem. I use P3d v4.5 The Phenom 300 is version 2.1 of the Carenado I am practically unable to use the Phenom 300's central MFD. If I press the enter key, the initial image does not disappear and always remains in the foreground, not allowing me to use the tool. Do you have any suggestions? Look at the video I uploaded to Youtube. https://www.youtube.com/watch?v=6-VHWyssO_4 My graphics card drivers are up to date. I own a GTX Nvidia 1080Ti As a processor I have an Intel I7 7700K overclocked to 5GHz. and 32Gb of RAM …

Hello everyone, I found a new passion in flying the Phenom 300. Because I´ve once been on a Phenom I´d like to fly the exact one in the sim as well. So if there is the chance of getting the livery done by somebody. This would make me really happy As I fly mainly in Europe I´m wondering if the option to change the Units into metric is simply not modeled or if this is a bug? Thank you

Hi all, I have again problems with the Phenom 300. 1.) I'm unable to select fuel weight in KG at the AUX page. Only selectable are IG and LBS, but the cursor cannot be set to KG 2.) I cannot open the baggage door fwd and/or aft. It does'nt matter I use the control panel or the std key strokes. If, for example the entry door is open and I select fwd or aft baggage, the entry door closed. If all doors are closed, and I select the fwd/aft door, the entry door opens. Any help welcome Peter

https://forums.vatusa.net/index.php?topic=10288.msg46219#msg46219

Just wondering if there's been updates on installing the GTN 750 in this aircraft. With FSX Bert had sent me an install but that was when it came out and since then i updated my rig and scaped fsx to P3Dv4 so i'm behind the 8 ball. I searched a bit but did not see anything to answer my question -Thanks Louis CYYC

Just installed the Navigraph expansion but after powering on the batteries the MFD is struck on the intro screen and showing the AIRAC out of date (Exp Mar 30 2016) although the db file in the CarinadoNavigraph folder is up-to-date after updating nav data with Navigraph FMS Manager. I clicked on ENT as specified but the map only flashes and I'm back to the Intro screen. Any ideas why this is happening? Runnnig P3D V4.5 Hotfix 3, and here's how my dll.xml looks like: <?xml version="1.0" encoding="utf-8"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>dll.xml</Filename> <Launch.…

I request LN-HLM for the Carenado Phenom 300. It looks good, and it is operated by Sundt Air, and is the ONLY norwegian registered Phenom!

Hi all, I´m like to update my Emb300 with the GTN750. Which one should I get: Flight1 or RXP??. I have read at Simbrief that the flightplan export works for the F1 GTN. In this case , I do not have to insert a fltpln manually, which is a big plus for me. Any suggestion? Thank you Peter

Hi all, is there a way to adjust the colour of PFD/MFD? Peter

Hi, I bought the Navigraph Expansion and I used the FMS Data Manager as well as a manual install of the FMS Data from the Navigraph website, but the G1000 seems to be stuck on the 2016 version in that initial screen it shows. Any insight? This is driving me crazy - I have been able to update all the non-G1000 Carenado FMS systems just fine - the ProLine works fine.