Can someone tell me the name of the FMC keyboard under which it is
listed in the panel.cfg

Thanks, Peter

Does anybody have a template of the phenom 300 for Professional flight planner X? I´ve been looking around and airlinerperformance.net/ used to have one but not anymore.

Thanks!

I know that CAS is telling me I have a problem in fuel E1, and BYP is bypass.

My rig is W10 / P3Dv5.4 last HF.

Any ideas?

Any help would be most appreciated.

But would be interested to see of if anyone has a insight.

Thanks.

Reading many of the reviews on the newly released 300 and I too was surprised by the lack of work that was done on the autopilot system.  I'm in noway a real world pilot so I'm not sure if the AP in the real 300 sucks the same way?

Nonetheless; I'm wondering if one of the Wizkids on this forum is planning on retrofitting the GTN750 to the 300 VC.  Bert and another gentleman made mods for the 100 and the Hawker 850.  If anyone is planning on do the same for the 300, please let us know (I'm beggin' here....)

Thanks 

GTN MFD ENHANCEMENTS

Two configurations options are provided for the placement of the GTN gauges in the MFD cockpit, a single GTN 750, and dual side by side GTN 750s. In the single GTN, the EIS gauges are displayed vertically on the left side and the GTN fills the rest of the screen. For the dual GTN’s version, the EIS pages are displayed below the GTN gauges.

Each option has its advantages and disadvantages. The single GTN screen is larger and easier on the eyes, while the dual GTN setup allows for two different pages to be displayed simultaneously, albeit on a smaller scale. The horizontal EIS pages on the dual GTN setup have larger fonts and values are less crammed than in the vertical EIS format. 

Modified cockpit panel textures are provided for the single and dual configuration options. Each texture basically changes the layout of the bottom softkeys that interact with the EIS pages, as well as modifications for the right bezel buttons, to add direct shortcuts to the Home, DTO, default GPS (Unit1,Unit2,Sim GPS), and stock MFD popup. 

Different panel configuration options are provided for each GTN setup both for F1 GTN and RTX GTN. These include the addition of a weather radar gauge or a secondary GTN 650 (only available in the single GTN alternative) in place of the MFD GCU keypad in the lower cockpit panel. Specific textures are provided for these gauges.

In addition to the revised EIS pages, a number of modifications and additional features are included in the GTN MFD gauge for the Phenom 300: 

• The PFD CDI is now crosslinked to the GTN CDI.  Switching the GTN CDI will automatically set the PFD CDI source. Previously, the changes in the PFD CDI could change the GTN CDI source, but not the other way.  Now if the GPS is guiding to an ILS approach, once the GTN switches to Localizer CDI mode, the PFD will automatically engage into NAV1 CDI mode. The PFD’s CDI soft key retains its original functionality and can override the GTN if desired.

• Automatic Thrust Reserve (ATR) functionality is enabled. The default mode for the ATR is off, and can be enabled via the ENG SET softkey button in the EIS Engine page to engage the Takeoff Reserve power setting or thru the 2D stock MFD.  It will provide an extra 4 percent power when on. The ATR is automatically enabled under one engine operation, and it will automatically disengage after 20 minutes operation. As in the real aircraft, temperature must be set before enabling the ATR ON button.

• The engine igniter switches are functional.  The engine will not start if its igniter switch is set to OFF.

• The transponder settings are automatically controlled by the GTN MFD. The PFD’s XPDR mode (STBY, ON, ALT) will be switched to STBY on the ground, to ON below 500’ AGL and to ALT mode over 500’ AGL.

1. Oxygen tank’s initial quantity is set to full at startup when fuel capacity is greater that 70%, else it is set as percentage of fuel capacity. Consumption is calculated based on 5 hrs. duration with 1850 lbs. with the Oxygen valve open and altitude above 10000 MSL. No dispatch CAS warnings will appear on the EIS gauge if pressure is below 730 psi.

• Landing field elevation warning will remain flashing until field elevation is changed. The LFE adjustment bottom soft keys have been added to the PFD accessible thru the System EIS page. Cabin altitude is set to density altitude on initialization.

• Cockpit animations for side sunshades and instrument reflections are enabled on a cold cockpit, and are disabled when battery power is available.

• Pushback can be activated by the Cabin ALT switch on the lower panel. Left click releases the parking brake and toggles the pushback on, while right click disables the Push back (parking brake is not re-engaged). The original functionality of the Cabin Alt switch is not affected by this change, and will continue to work inflight.

• Visual and aural altitude capture alerts at 1000 and 100’ have been incorporated in the PFD.

• Ground Power mode has been added to power up the Shed Bus while on ground with ENG2 running. When active, the turbine will enter in power reduction mode. Setting the Engine1 starter switch on will disengage Ground Power mode, disconnect the Shed Bus, and restore Engine2 to its normal idle.

• Ground spoilers are automatically enabled by the full flaps setting and automatically retracted on speed below 30 knots, increase throttle, or flap retraction from FULL position. Speed brakes can manually activated via the cockpit switch, or programmed to a joystick or throttle quadrant lever or button.

• Forward recognition strobe lights have been added, activated via the Effects switch in the overhead cabin light panel. Two options are provided for two-flash and three-flash strobe effects. The strobes are automatically disabled when the landing or taxi light is activated.

• Flap activation turns recognition strobes off and will activate the landing lights if airspeed greater than 30 knots.

• Pressure gauges are modeled to be live and more realistic. Consumption of oxygen will commence above FL100 if the cutoff O2 valve is open, and no pressure readings are shown if the corresponding shutoff valves are closed (hydraulic, bleed air, ECS, Oxygen).

• The emergency brake reserve accumulator tank is programmed to provide up to six applications of the emergency brakes (parking lever) if no system hydraulic pressure is available. If the accumulator pressure falls below 475 psi, the emergency/parking brakes will not engage.

• Master brightness control for the PFDs, MFDs and EFIS has been incorporated in the Audio panel’s Pilot/Passenger volume knob (above the Display Backup red button), and will adjust the brightness levels in the PFD, MFD (EIS section), and the EFIS. Very useful to tone down the SVS brightness.

• Inflight fuel, time and distance statistics are provided in the corresponding EIS page in the MFD. Some of the computations such as endurance reserves, fuel required, reserve fuel at destination, rely on flight plan data variables which the GTN 750 does not provide, and must be obtained from the FSX / P3D sim’s legacy flight plan. Creating and loading a flight plan with departure and destination waypoints will provide the sufficient data these computations. More accuracy can be achieved by loading a more complete flight plan by using apps like Little NavMap to export flight plans to both the GTN and the sim’s flight planner.

• Cruise speed control (CSC) functionality is added to the Autopilot and enabled by the CSC button in the AP panel, the selected speed above the airspeed ribbon in the PFD will turn from cyan to green when enabled. This must be enabled in the aircraft.cfg file autopilot parameters. CSC will disengage under over speed or under speed conditions, and below 500’ AGL. 

All gauge parameter and limits have been modeled to the real Phenom 300, and all cockpit switches are live switches, and deviations from normal will be reflected on the CAS alerts, and in the gauges as well.   

The Mod also includes revised panel textures for the single and dual panel option.

If you want to help in the final beta testing phase, please drop me a PM with your email address and I will send you the download link.

Safe landings,

Jorge

I get the fltplan from Simbrief always rejectet from loading into the GTN.

Then I changed the name from orign NCRG-NTAA to NCRG_NTAA (acc to the book) and then it was ok.

Now the GTN rejected this format also. Only manual input possible

Any tips?

Peter

I type EGCC and hit ENTER but it goes in as the first waypoint. In the next field down it shows the heading and distance from (blank) to EGCC. 😠

The software is either faulty or the process is very strange. I consider myself reasonably intelligent but just can’t fathom out how it works.

I'm brand new to the 300 and I've had a few issues regarding the installation. I have it working now but on the PROC display in the PFD, only the ARRIVAL option is active (Cyan) the rest are greyed out. I can cycle through the top two but the bottom two are not accessible. I've watched the FSMania videos and they are available in his PFD. I've re-downloaded the file several times, even using the email download but the result is the same. Does anyone have an answer for this? Any help will be much appreciated.

Thanks...Kenny

What have I missed?

https://youtu.be/me5qnnGEARE

I have a Learjet 25 from Extreme Prototypes but the lights have a huge impact on performance. In all other respects it a nice enough aircraft bar the 1970s cockpit.

I’m considering this Phenom as I love the G1000 display and that was the main reason I bought the Vertx DA-62.

But that’s a pretty slow aircraft so what I’m looking for is the VC of the Vertx with the speed of the Lear.

I have Aivlasoft’s EFB from which I can generate flight plans so the lack of recent Nav data in the Carenado isn’t a problem. My Navigraph subscription plus accessing another site for default VORs, NDBs etc means the nav data is fine in P3D.

Anything that I should be aware of?

Hi everyone, I did a Google search but I couldn't find an answer to my problem.

I am practically unable to use the Phenom 300's central MFD.
If I press the enter key, the initial image does not disappear and always remains in the foreground, not allowing me to use the tool.
Do you have any suggestions?
Look at the video I uploaded to Youtube.

https://www.youtube.com/watch?v=6-VHWyssO_4

My graphics card drivers are up to date.
I own a GTX Nvidia 1080Ti
As a processor I have an Intel I7 7700K overclocked to 5GHz.
and 32Gb of RAM

Any suggestion is grateful!

PS
I have already tried uninstalling and reinstalling the product but it doesn't work..

I found a new passion in flying the Phenom 300. Because I´ve once been on a Phenom I´d like to fly the exact one in the sim as well. So if there is the chance of getting the livery done by somebody. This would make me really happy

As I fly mainly in Europe I´m wondering if the option to change the Units into metric is simply not modeled or if this is a bug? 

Thank you 

I have again problems with the Phenom 300.

1.) I'm unable to select fuel weight in KG at the AUX page. Only selectable are IG and LBS, but the cursor cannot be set to KG

2.) I cannot open the baggage door fwd and/or aft. It does'nt matter I use the control panel or the std key strokes. If, for example the entry door is open

     and I select fwd or aft baggage, the entry door closed. If all doors are closed, and I select the fwd/aft  door, the entry door opens.

Any help welcome

Peter

Runnnig P3D V4.5 Hotfix 3, and here's how my dll.xml looks like:

<?xml version="1.0" encoding="utf-8"?>
<SimBase.Document Type="Launch" version="1,0">
  <Descr>Launch</Descr>
  <Filename>dll.xml</Filename>
  <Launch.ManualLoad>False</Launch.ManualLoad>
  <Launch.Addon>
    <Name>SPAD.neXt LVAR Bridge</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>Modules\spdbridge64.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>CMeteoXml</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>.\CMeteoXml.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>FSUIPC 5</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>Navigraph Simlink</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>Gauges\NavigraphSimlink.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>IVAO Pilot Client</Name>
    <Disabled>False</Disabled>
    <Path>C:\Flight Simulation\Tools\IVAO\Pilot\PilotCore\pilot_core_fsxp3d_x64.dll</Path>
    <Commandline />
  </Launch.Addon>
  <Launch.Addon>
    <Name>Carenavigraph</Name>
    <Disabled>False</Disabled>
    <Path>.\Carenavigraph.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>as_connect</Name>
    <Disabled>False</Disabled>
    <Path>as_srv\as_connect_64.dll</Path>
  </Launch.Addon>
</SimBase.Document>
 

Thanks,

Mustafa

It looks good, and it is operated by Sundt Air, and is the ONLY norwegian registered Phenom!

I´m like to update my Emb300 with the GTN750.

Which one should I get: Flight1 or RXP??.  I have read at Simbrief that the flightplan export works for the F1 GTN. 

In this case , I do not have to insert a fltpln manually, which is a big plus for me.

Any suggestion?

Thank you

Peter

is there a way to adjust the colour of PFD/MFD?

Peter

I bought the Navigraph Expansion and I used the FMS Data Manager as well as a manual install of the FMS Data from the Navigraph website, but the G1000 seems to be stuck on the 2016 version in that initial screen it shows. Any insight? This is driving me crazy - I have been able to update all the non-G1000 Carenado FMS systems just fine - the ProLine works fine.