Pilot2ATC Users Forum

Im Sorry if I'm just missing something, I am new to Pilot2ATC but the database doesn't seem to have any of the High Airways RNAV Points in it. If I try to import a flight plan from Navicharts or even enter it manually after creating it in the simulator it doesn't recognize any of the waypoints. Is there something I am doing wrong? I haven't had any issues with low level waypoints. Thanks,

Ok, sorry if this has been asked before, but I didn't see anything regarding this... I am happy to know that Pilot2ATC works with MS2020!!! 😄 But, I ran Pilot2ATC on a networked computer with P3D V5. I now run MS2020 in VR mode on my Oculus Quest 2. I have a very robust system now 😉 My question is, can I actually run a networked version of P2Atc now?! I mean, I had to always look at my other computer to do things in P2Atc. Is there a possible pop up in vr, if I ran it from my main computer instead of on my networked one, that would show in MS2020, if you know what I mean?? A lot the times, I used the say it button to 'talk' to atc, for instance. B…

Is there a way to know the exact distance between the aircraft and a specific waypoint during the flight?

Mic is not being picked up, I have looked through many of the posts and tried alot of solutions but none seem to pick up mic, I am using a JLabs mic and it works with everything else, like teamspeak and discord etc, everything is turned up to the max, any suggestions...

Just started with this and struggling to get it to recognise voice commands, tried the advice from other posts. If I use Grammar Helper my voice is picked up, but 99% unrecognised, very occasionally it will understand Say Altitude, but that's about it. Any advice would be appreciated, Regards G

trying to get IFR clearance tower frequency is listed as 133.10 i get weather report etc but when trying too swap freq to tower to get clearance it changes the com from stand by to active but changes the freq to the weather report one tried setting active tower com in aircraft then connecting pilot2atc but same result any ideas?

Hi all I think it may be something simple I have missed, and hopefully someone can help. I am getting activity like windows popping up in Windows 10 when I speak into the Mic. I am also getting activity in x-plane, like flaps going down or the map appearing when I speak into the mic. Love the software, and if I can fix this it would be even better! Thanks in advance for any suggestions. Dom

Just before flying a STAR, P2ATC typically instructs "Will cross XXX (STAR transition waypoint) at YYY feet". The problem I am having now is that since a couple of weeks (maybe since the last minor update 2.6.2.2_X64_R2), The YYY altitude has been systematically one thousand feet, which is very probably wrong. Any idea why and how to fix this? Sam

I just viewed a few Pilot2ATC videos on YouTube from around 3 years ago. The Controllers sound very mechanical in comparison to default FSX ATC. Do they sound any more human as of 2021? I just bought a headset and I am interested in the software. Also, does Pilot2ATC work with Flight1's Ultimate Traffic Live AI? Thanks Gary

The airborn traffic and ground traffic don't appear on map . I am using realtraffic + psxseecontraffc and since last couple of days the air traffic don't appear in map. Last week was working perfect thanks

All flifht plans imported to Pilot2ATC asign a cruise altitude of FL180 , is there any way to disable it and get cruise altitudes upper than FL180? All flight plans are made traveling inside Europe Thanks

Just bought Ultimate Traffic Live. Does Pilot2ATC recognize and control UTL generated AI. Thanks

Looks like I have to export and load via FMC it does not appear to load it when I click FILE in Pilot2ATC

Hello all. I've recently started using Pilot2ATC and I just added the FS ATC Chatter this morning. I need to turn the volume up on the chatter and I can't seem to, though. From reading the instructions, which I actually broke down and did...the horror...it seems I should click on the com 1 standby channel and a window will open that will allow me to adjust the volume. However, when I click on the standby freq. it tries to open another window, I can see the shell of it added on the task bar, but I can't select it and can't see it. I do see the small preview window, which shows a black box with some error icons all over it. Any idea how I fix this? I tried searching w…

Can load and start but no atis or any response on the new Crjs from Aerosoft. The avionics are on and the plane is ready to taxi any thoughts?

Hi! I have the Navigraph AIRAC installed but when i plan flights the P2A and Navigraph/MSFS shows different SIDs and STARs.. The do not match.. Why is this?

Just got a new computer today, and now installing MSFS 🥱 and all tools I've been using. Is there any way to transfer the P2A configuration / settings from my old machine, or do I have to start from scratch? Thanks! Dirk

During the flight Copilot Options: "Responds To Radio" and "Changes Frequencies" turn on and off randomly which is very annoying, as I can't confirm and change frequencies myself. Unchecking them in Config tab doesn't help. I noticed that clicking on the upper area of Speech Recognition Settings checked and unchecked these two boxes without any sense, and it is very weird. Is there any solution? It appeared in two last versions of Pilot2ATC.

Is there a method or is it in the works to save an ATC voice configuration. I have voices that work for Nippon, UK, and the US and would like to just click a saved setting and all the voices are there, rather than changing each voice by hand (16?) each time I fly in those regions. By the way, the Japanese voices pronounce Japanese cities correctly, whereas the US/UK voices are miserable there and vice versa.

If I point the weather to my X-Plane directory where the METAR.rwx file is I get weather not available? If I use NOAA Weather it works OK?

Hello, After dealing with stuttering in X-Plane over the last week, I've finally discovered that the P2A_XPLink plugin is the culprit. Even with this plugin being the only one in the plugins folder and disabling AI traffic (Traffic Global), it causes stutters. As soon as I removed it X-Plane was back to butter smooth.

So this is happening over and over again. I get to somewhere around cruise altitude and report my altitude. If this is not understood, instead of asking me to say again, ATC goes silent and won't respond to anything. At this point I disconnect and reconnect Pilot2atc which doesn't always work for the rest of the flight. How can I get around this? I suppose I need to train the system to recognise flight levels a bit better for starters.. I guess my question is, when It does stop responding, do I need to reconnect or will it become functional again at the next handover?

I am having difficulty to understand how I can identify the specific approach assigned by P2ATC when there are several with the same procedure (ex: RNAV X, Y , Z or ILS X, Y, Z). An exemple of this is flying to NZQN. P2ATC ATC assigned to me an RNAV approach to runway 23. Actually there are 4 RNAV approaches that can lead to runway 23 according to Navigraph: RNAV 23 Z, RNAV (unspecified runway) G, RNAV(unspecified runway) F and RNAV(unspecified runway) H, they are completely different. How do I know which one to follow? Additional related questions: In the example of flying to NZQN and after assigning the RNAB 23 approach eventually P2ATC ATC instruct…

Not sure what else to do. I import my simbrief plan into P2ATC, enter SID, STAR, proper approach and everything matches up perfectly and my flight stays exactly on course on map in P2ATC. Problem continues to be that ATC does not give me any descent step down information. Example.. tonight I have an easy 60 minute flight into Montreal Canada. Cruise altitude for the trip is 36,000 feet. On P2ATC map, I fly right over the green arrow on map (expecting descend instructions) and nothing. As I get closer I begin to descend on my own, ATC continues to yap in my ear to climb to 36,000 feet yet I am literally 15 nautical miles to runway in my final approach where I need to…

i have just done a flight in to EGUN ILS runway 29 with the tusme transition on the chart and p2a there is a loop to do first sorry dont know the proper term as fs2020 do not automatically do this loop and just cuts it out p2a did not advance the way point and on advising i was on approach to the ils i was told frequency change approved and report field in site on the p2a way points i was further away from the airport than i actually was is there a way for me to tell p2a to advance to the next way point? on a side note where can i host a picture to add on the forums have tried one drive and google drive both are rejected with the insert image from url bu…