Pilot2ATC Users Forum

I purchased tonight and the key given states its invalid

Hi, I have recently been training some missed approaches with Pilot2ATC with the copilot voice enabled. Everything working fine, I announce "Lufthansa 123 going around" and the copilot takes over for the rest. Now this will happen and all will be managed by the copilot: 1) Tower sends us to approach frequency 2) Copilot tunes in approach frequence 3) Copilot checks in with approach 4) Approach gives us radar vectors for new approach So actually everything is working fine and as expected. However, this is all going way too fast and I usually end with just starting my (for example) right turn on the published missed approach procedure, when ATC gives …

Is there a way to report "Clear of active" using the Say-it phrases? I looked everywhere but I couldn't find it, but maybe I'm just too blind... Dirk

Hello, It seems to me that during a previous update, an option in the speech assistant window was added to ask to change the runway, approach and / or arrival. I just made a flight to Nantres (LFRS) where P2ATC gave me an NDB approach for runway 03. I wanted to ask ATC for a change of approach (RNav instead of NDB). I never had the opportunity in the speech assistant window to make my change request. Is this normal? In order to be able to request a change, do you first have to modify the flight plan? Could you help me and remind me of the procedure to request a change of arrival or runway or approach? Thank you. Regards. Vincent

MSFS 2020, FBW A320 and P2ATC; P2A consistently requesting squawk at every en-route controller change. Does anyone else have this issue? I would report it to FBW but I am not sure exactly what to report (is there a specific variable name that I need to reference to the FBW team? - what exactly does P2ATC looking for?)

Hello Dave 🙂 I use the last Pilot2ATC v2.6.2.1_x64 release. For the ATC dialogs, I use the P2A_SpeechAssitant. To send messages, I use a button on my joystick. Every time I send a request or a reply to ATC, I get an unwanted popup window. If I don't close them, I have a lot of windows like this one:

I am trying to select the JOHKR1 SID out of KLAS runway 26R but none is shown on the drop down list. I have updated the Airac to 2102 with Navigraph data manager. Am I missing a step somewhere? Any help would be appreciated.

I'm a new user of pilot2atc and I've just installed x-atc-chatter. I'm sitting at KPHX on Clearance Delivery hearing clearances for JFK. I'm quite certain that I've got the native X-ATC-CHATTER set for integration and the sound files are installed in pilot2atc. thanks b

Hello, I normally fly in VR. So when I am ready to request clearance to copy an IFR flight plan, I am in the cockpit in 3D - TBM 930 - and without an easy connection to the rest of the desktop. When Clearance gives me the squawk code I enter it on the MFD and it shows there. But P2A doesn't see the transponder as active, so every radio contact starts with a request to Squawk XXXX. I have to leave MSFS minimized to get a mouse that will let me go into P2A and make the transponder active. From that point on, it works fine. I am trying to load P2A again to describe more detail and it says that another instance of the program is still running. Task manager doesn't s…

J Just a little thing that's happened twice lately, When I receive the 'descend via' message (in this case I was at FL410, ATC advises me to decend to FL410. I did my descent as planned and ATC didn't tell me off so it didn't at actually cause an issue. This is with MSFS.

I am using FS2020 is it worth running make runways after every sim update to get the latest taxi ways in to p2a or is it more a case of if its not broke don`t fix it i know the program takes some time to run and that p2a takes a while to import the data but i don`t mind that

Hoping someone can help. New Pilot2Atc user, have it connected properly, and works perfectly for everything prior to departure. I can get my clearance, pushback, taxi, departure runway approval, etc. Problems start once I take off. I NEVER hear from ATC once I get in the air. I have my co-pilot set up for frequency changes and responding to radio. I take off, and literally fly to my destination with no ATC communications back to me. I don't get radar contact, no altitude change request, nothing??? My sqawk is code is showing up in top of the box in p2atc nor am I fiddling with frequency changes. I am leaving everything as is and waiting for ATC to contact me. Wha…

Hi I don't believe this is an issue with P2A, but probably my PC/microphone setup with P2A, but really would like to get to the bottom of a microphone issue. When I start P2A and connect to MSFS, my voice is detected fine. During any random time during the flight, my voice is no longer detected. I also note at the same time, ATC Chatter is not disabled when I press the PTT button. Grammar Help does not hear my voice (it does however, state the microphone that it has detected). I shut down P2A, restart it, speak and voice is detected & recognised again. Is there something I'm missing that is making my microphone go to sleep in P2A? …

Does P2ATC totally take over for FSX default ATC? Does it read flight plans created in default flight planner or is it better to use P2ATCs flight planner. Thanks

when p2a misunderstands what i am saying i know what it thinks i have said it puts in the log is there any way to get this to show in the chat box not sure what its actually called where it shows what it has understood in the bottom right of p2a as i am not sure if its heard me at all or what part of the phrase its misunderstanding i would like to know where its going wrong so i can do some voice training and going through the log every time is a bit cumbersome

Please if there is any chance for the next version 1) Night mode for the map 2) Direct to request 3) MOST important: Random ATC background chatter playing. ( I'm so tired of EHAM chatter in the background) 😄 Cheers and thx

I am trying to do some VFR flight in the 152 am still wanting to use p2a and some times do some flight following or request take off / landing is there any guides out there on how to do this i am still pretty new to flight siming and aviation and am not sure who i need to contact when at an unmanned location or can i just take off then contact say control when in the air?

Hi, Since yesterday, I cannot launch P2A. Everytime it launch it goes through the loading splash screen, then it disappears and no windows appear, any idea on how to fix it? I have already tried to reinstall the program. Thanks.

Hello all, I am wondering how long it takes to receive the email giving you the registration key. I made my purchase 3 days ago with paypal and was successful. But as of this date and time still no registration key from Pilot2Atc. Thanks all Dennis Gwozdz [email protected]

Hi Dave I would like downloading v 2.6.1.2. Since the latest version I have randomly freezes in X-Plane 11.52. I would like testing with an older version. J. EDIT: Found it. No action necessary....

When I add an airway and select the navaid I would like to terminate at is there a way to highlight that navaid on the Airway map. Regards

When I try to file a flight plan the program freezes using p3dv4.5 . ok until yesterday

Hi David, since the last update the pronounced center names are complete nonsense ATLANTIC One Niner Two Three Contact SKOPJECOUNTYNTROL Center on One One Niner Decimal Three Seven enjoy your morning What should that be? Cheers

Hi, It's been 2 days and I haven't received any registration or license info. I have a PayPal receipt, but that's it. My trial version has expired and I'm looking forward to using Pilot2ATC. I checked my spam folder, but nothing there. I also sent an email to the admin address, but no reply. Any ideas? Thanks, George P.

I have tried to establish taxiways at katl but taxi mnt refuses to do do this. I got all the gates just fine https://www.dropbox.com/preview/Screenshot 2021-02-22 101827.png?role=personal any help? James