Pilot2ATC Users Forum

Is there a way to change the term "Lufthansa 456, climb to flight level 270" to "Lufthansa 456, climb flight level 270"? It's a bit annoying to always hear the incorrect phrases especially when using P2ATC for training purposes...

Hiya Dave I can't land at EGLL . all time the ATC says me traffic on runway ....missed aproach The ia traffic has taken off when iam approaching and there is no traffic on runway but atc still tell me that there is traffic on runway and can't land Is there a way to fix it through config menu? thanks

Hi There Just out of the blue without warning Pilot2ATc doesn't seem to connect to XP12 Says simulator connected Green Pwr on Ignore Avionics switch ticked Ignore battery switch ticked can validate flight plan can file flight plan cannot see my aircraft when pressing yellow button, however it will centre to where the aircraft is No ATC Regards

I've been checking these out today and some of them are very good indeed, albeit rather slow for ATC. So I'm wondering whether other users have had any success in speeding these up within P2A, given that the Speed control in the Voices tab doesn't seem to have any affect on them? Thanks in advance for any advice on how to achieve this. For anyone who may be interested in these, but hasn't yet tried them, the sign up and installation process is a bit convoluted, but it is worth persevering with.

Hi everyone, Does any body have problem with P2ATc and XP12? I don't know what I am doing wrong, but I can't do a whole flight without P2ATC freezing and stopping working every other minute. It could be a connection problem . Second, I have not been able to let the copilot change frequencies, so it's a nightmare. I am using the last issue from xpuipc+ in a network environment. I have flown the Xcarft ERJ, Felis B747, and IXEG 737 until now. Any help? Thank you IPA

I have been so exited about Polly Amazon voices since I saw this video on youtube. But finding out how to get it working has been a nightmare. First off I haven't done any sort of testing sofar. I have only tried to gather information about the facts and the process. The only thing I have done sofar is create a user at AWS (Provider of the service). I have come across this tutorial: https://torontoai.org/2019/09/25/using-amazon-polly-in-windows-applications/ Because I have understood from the video that PILOT2ATC uses the windows TTS engine to generate speech inside the application. Is this where I should start? Kind Regards Morten

Hi Dave Thanks for P2ATC -it reallly makes XP12 come alive! I've been trying to get it to see the XP12 AI (I've added 19 AI B737 Laminar aircraft at the flight set up screen for P2ATC to use). Hovever I've noted the follwing 1.At EIDW I was instructed to take off RWY 16 when there was an aircraft on short final 28R and I was holding short to cross-is this something P2ATC can prevent? 2.I lose control of my spacebar (NB I use Win 10 and WMR for VR). I can't see the option for uploading files here

Hi Dave, Is there anyway that P2ATC could implement an option to delay take off for spacing with AI? Currently, take off clearance is given with the wake turbulence warning as soon as the AI is off the runway. Would this be possible? John

I have a wave sound file to simulate radio degradation sound , i have selected it in config but nothing works anyone have this problem too? thanks

Hi, In P2ATC I have NOAA weather selected. Whilst creating a flight plan and departing LEMG, pressing the Wx button tells me winds are: 291 @ 3Kts which matches the real world METAR. Yet both ATIS and pressing the info button in P2ATC tell me departures & arrivals are runway 12 which is incorrect. This is without the X-plane running. When I start up XP12, I have Traffic Global plugin running and this too has traffic arriving and departing in the wrong direction, this could be coincidence so I'm not sure if the two are connected. Any help would be appreciated. Thanks

Hi Dave, I hope you are well. I am having a small issue with the chatter files for Asia, P2ATC plays what I believe is the Oceania files. I have my chatter files in the following structure.. C:\Pilot2ATC_2021_x64\Sounds\ATC_Chatter\Regions\Asia\Controllers I have the Controller Folders radio button checked in P2ATC and Asia selected as default. What should I have in the Root Folder? I am sure I am doing something wrong, so any suggestions welcome. Many thanks, Stuart

As of today, whenever I try to open P2ATC, I get a Database Error message. I do not know why, because I have not changed anything. What can I do? I have already reinstalled. Thanks a lot

I've been trying to request taxi to a different runway than ATC would like to assign. I'm requesting a parallel runway so wind should not be a problem. I am picking the available request phrase from the pull down menu and am using the sayit function. I have the "Force pilot runway selection" button checked. The response is always taxi to the ATC preferred runway. i've tried this at two different airports with the same result. Any suggestions? Thanks.

Hello! I've recently started the trial period for this program, so far I'm really enjoying it! However, I've noticed that after I import data collected by MakeRwys into the program, the controllers will soon completely cease to respond. It has happened twice so far, and both times, it has been immediately prior to the approach phase of flight. From my experience so far, it seems that attempting to perform an approach into any airport that has had MakeRwys data imported into it will kill the controllers' ability to understand me. To clarify, once this happens, it effects all controllers. It can be temporarily fixed by reconnecting to the sim, however I noticed that attempt…

I did a flight yesterday with P2ATC in XP12.(What a godsend this program is!). At EIDW the tower frequency suggested by P2ATC ground is different from what shows up in the avitab plugin but P2ATC accepts comms on the latter! Also there is no .005 frequency options on the Toliss A320 while the grinding frequencies suggested by P2ATC include these (although P2ATC seems to accept comms on the closest frequency?) Are these bugs? Thanks. Jay

Hi Guys, I know the dev of Pilot2ATC is active, so I hope someone or him can help 🙂 I am currently doing the trial days and everything seems to be okay except for when I take off from ZRH with an initial climb alitude (set by ATC) to FL140. After transition alt I set it to STD at FL140 and Pilot2ATC keeps asking me to expedite. I even changed the settings to allow up to 1000 feet difference, to no avail. I appreciate if anyone can help me with this. Thanks galaxy

As the AI programs are releasing their pay structures and users are getting sticker shock, I decided to put together a soup to nuts setup video that shows users how to get Pilot2ATC configured in the way I've been using it and covers things like Makerwys that took me a bit to workout a half year ago when I started using the app. I have a really good experience with it in the sim, and its frankly the response times for the AI systems that puts me off more than the pricing models, though I can't imagine the bill I'd have doing 1-2 hour pattern touch-and-goes. In any case, users here might find a few things they didn't know, or might be able to tell me a few things I don't k…

Hi-where is this file on the client computer? Thanks.

Hi,is there a way in the options to change lets say when the tower says “ Taxi to runway Twenty Six left” and instead it will show in the text box “Taxi to runway 26L” same when the tower says the frequency’s and the altimeter. that would be great to have because it will minimize a lot of reading. Im finding t’s a bit hard to read everything ATC says, special when English is not my first language. Ricky

I've been using Pro-ATC since forever. And RC4 before that. Since PATC is no longer supported, I've been bummed out by some of the bugs that will never be fixed. I periodically look for new ATC programs, but never did find this one until I saw it mentioned in some obscure post. Why have I never heard of P2A before? First run was from LPLA to TNCM. I was quite impressed. Everything worked like it was supposed to. ATC instructions made sense. It even said "no" when I asked for a bogus altitude and recognizes my position on the ground. (That part is HUGE -- I'm not sure how far you go with this, but getting a "cross runway" instruction made my day.) I shot a mi…

Hello folks, I recently had to wipe my PC and start over. When I reinstalled P2ATC it originally accepted my activation code, however it is now saying it is installed in a different machine and denies access. I am using the same PC, so how do I fix this issue? Many thanks, Stuart

I've been running around for the last 30 minutes and I am not handed over to tower. Where should I be? Airport is KEWR. Been cleared to taxi to RWY04L. The taxi instructions dont resemble the airport, but I followed the blue line, but P2ATC does not hand me over to tower. Picture is just where I took it. I've been driving around the end of the blue line for 30 minutes https://drive.google.com/file/d/1h-siTzPUGgsYtZ4tVTZc7Oup6X-nKW-F/view?usp=drive_link

Hi Dave, I just downloaded the latest beta (2.7.0.0 7N) and my BitDefender AV software blocked the install. It's telling me the exe and a temp file are blocked due to malware. Unfortunately it does not give me a lot of details as to why it did that. I've been using Pilot2Atc for more than a year now, generally downloading the latest beta whenever it is available. This is the first time my AV software has complained. I did an individual scan of the exe and it came back clean. Is it possible that your beta installer process has changed so that it is doing something that the AV software does not like? Regards, Roger

Hi, I'm running Pilot2ATC 2.7.0.0_x64_Beta7N on windows 10 with MSFS 2020 (still in trial mode). I wanted to use the GMFZ airport which is not in the database, so I ran MakeRunways and went in the Taxi Mnt option of P2A, selected "MakeRunways Folder for P3D or MSFS" and typed the path of the folder where MakeRunways files were created. I made sure "Import New Airports from MakeRwys" is ticked and in the Config option, in the Flt Pln tab the "Only Use Airports in AIRAC Data" is unticked. Then I ran "Import Tawxiways From All Airports" and "Import Gates From All Airport". As described, it took some time and the Taxi Mnt window closes at the end. I restarted Pilot2…

P2ATC says I'm number 2 for departure. There are no other aircraft at the airport. Why? Should I just take off?