Pilot2ATC Users Forum

KMEM only has approaches for 36L 36C and 36R, all the other approaches are unavailable.

pilot2atc was working fine but now asking to activate on startup. And I get license activation failed upon hitting activate. I just rebooted. and if I don't that I get a big white host connection error with a bunch of text

Where is the settings file? I had a CTD and lost all my settings... restored "Pilot2ATC_3.exe.config" and nothing has restored.

Hi there, I am having trouble updating the AIRAC in The P2A V3... I can't change it to the latest update using the FMS Installer. Any help would be greatly appreciated. TIA Using the navigraph subscription...

ATC keeps quiet after reaching TOD unlike in Ver 2 where I get the command like "descent to FL XXX". Is that by design? A Bug?

I hope someone can help me setup pilot2atc to use my wireless Bose headsets. The Bose headset and mic are set as the default in windows, and I even used the windows mixer to explicitly set pilot2atc to use the headset. But no matter what I do all the pilot2atc sounds come out my crappy monitor speakers. All the x-plane sounds go through the headset and sound good, and all the other pilot2atc functions work as expected. I have already restarted, rebooted and reinstalled everything, but still get the same results. I am using x-plane 12 with the 0.027M release of V3. I also installed the XPUIPC plugin from XPUIPCV2038 and it seems to work fine even though it says i…

Hi There, will there be an P2A Version plan for MSFS 2024? I tried to see if there was another topic about this but couldn't find one.. Any info or help would be greatly appreciated. TIA.

I can only hear certain controllers in x-plane using pilot2atc. In pilot2atc I can always hear ground controls voices, but I don't hear any other controllers and dont hear their messages, I have to constantly scan for new messages. I am using the 10 day trial using the latest download.

I currently have V2 installed and working perfectly. Will the install of trial version V3 have any affect on my V2 settings or voices? I spent so much time getting it just right and I don’t want to lose it. Will the upgrade purchase have any affect on my V2 install ? Thanks for your help.

I'm using Win 11 P2ATC v3H Traffic Global Whilst holding short of the runway I request clearance for take off. ATC tells me to remain holding short because of traffic on final. At that precise moment the message comes from ATC, all TG traffic freezes on the P2ATC map. But however, in the sim all remains normal and the approaching traffic lands, but I never get clearance to proceed. Ive tried this a few times with the same result. Any help would be appreciated. I've shortened the log file because all the latter pages were repetitive. P2ATC log PDF

I brought the complete package of ATC 3 a couple of days ago and am flying Xplane 12. I have everything set up nicely to a point. I can connect, upload my simbrief plan, I am using Copilot initially to do the radios and I can get clearance, pushback and taxi clearance no problem. However, when I get to holding short at the assigned runway, the radio moves to the tower and instantly moves back to the ground. I have tried to have copilot run the radio and I have manually tried to do it with the same results. I have tried two departure airports. Once out of DFW and Once out of SNA. Even after I take off without clearance, I can not get the radio to switch departure freq…

I noticed the Copilot is saying “Leveled at FLxx” when handed over to next ATC, it always says it even if I am descending.

P2ATC is reusing the Copilot voice for ATC. It’d be nice if the selected Copilot voice is removed from the rotation of random voices used for ATC.

Using P2ATC v3.0027A, I created a flight plan departing LEGR (Granada) from rwy 09 via the VIBAS SID, arriving LEAL (Alicante) via MAGAL approach to rwy 28. VIBAS to MAGAL is on a heading of 74º for 71nm, but for some reason as I approached TOD and after being instructed to descend to 4000’ via the MAGAL approach, ATC notified me that I was off course and to turn left to heading 50º. Knowing I was on course and center of the map track line I ignored the message and continued on 74º. As I continued my heading, ATC repeatedly told me I was off course and to turn left, but the correction angle never changed from 50º. which I thought strange. No big issue but …

In the same way the autopilot breaks out from the main window it would be helpful if all of the functions could break out. As it is I have to shrink the program so my screen real estate is open for the flight scenery. Co-pilot & Requests Map and FP Radios Instead of 'hide co-pilot' having it seperate would make it accessible but not necessarily taking up screen real estate. I imagine placing it over the moving map and being able to click back & forth. Thanks again for the program. (Please move this if it's in the wrong place)

How to I fix this Cruise altitude is out of range. I have imported from simbrief and tried changing the Cruise altitude but it keeps popping up. Thanks.

In V2 I let XP12 handle the ATIS because I can listen in COM2 and COM1 is used by P2ATC. Does V3 allow me to listening to ATIS in either COM radio? It seems in V3 the P2ATC configuration box to enable/disable ATIS is not working properly. I hear overlapping ATIS readout if that box is checked or unchecked.

Hello! I installed version 2703_x64_Beta1A on a networked PC and everything works fine, except for the AI traffic that seems not to be detected. In fact, both during takeoff and landing I found traffic on the runway in the opposite direction to mine, in addition to the fact that both on the ground and in flight I do not hear the communications of the AI aircraft (I remember that in an installation where everything was on a single PC this happened). What should I check? Maybe I forgot to install or configure something. Thanks in advance, Alessandro

Hi all! I am using P2A (version 2.7.0.2_x64) in a network environment and connected to P3D v4.5. Everything seems to work fine but at a certain point (it seems to me that it happens starting from the taxi to the runway) it seems that P2A no longer responds to calls. The program is connected to the simulator and the PTT activates (becomes green). The last time I declared "ready for departure" to the holding point, it responded to contact the tower frequency and then nothing more. After a long time from takeoff, not hearing any communications, I manually set the frequency of the airspace control where I was and I started to hear the communications again that stopped sh…

I recently upgraded my beta version to the latest version, and since then I cant get the chatter to work. i have spent several hours trying to sort this out. All help would be appreciated. Thanks in advance, Stan

Hi all, I'm running X-plane 12 on Windows 11 and I'm just navigating my way through P2ATC v3 0027A . Straight away I'm seeing certain box areas with missing text as depicted by the following links: Image 1 Image 2 Image 3 I've played around with Windows display settings but no change. Anyone else reporting this issue or found a solution?

I have MSFS on my W10 flight computer and had P2ATC v2 on a networked machine. Sound from the flight sim was broadcast through my surround system. No voice sound on it--just aircraft noise. P2ATC was on the networked computer with headphones and mic for P2ATC. Great setup. The networked computer bit the dust. I'd like to install P2ATC v3 on my flight computer, but don't know how to keep aircraft sounds on surround sound system with headphones and microphone also on the flight sim computer for P2ATC v3. Any help for achieving the desired result would be appreciated.

I have been using Pilot2ATC v2 with X-plane successfully for some time from this Airport I find that when I am at NZAA I cant contact ATC, it works fine at other airports such as NZWN when i connect at NZAA I can hear Atis and I am given the ClrDel Frequency correctly in Standby in P2ATC When I xfer to ClrDel the correct Frequency is shown in the Active Frequency box but the text underneath changes to '----' from NZAA CLrDel It is also correctly shown in the sim. But the Speech Assist box in P2ATC is is blank and I get no response to voice transmissions. It all works at another Airport Is there a way to "repair" NZAA? Thanks

This may be the wrong place, but I must express my thanks. For an awesome program. For real support. Thank you. I can't imagine flying without Pilot2ATC.

I have done many flights in V3 and always get good taxi guidance in the text - like this: ATC Speaks: Blue Streak five three one niner Runway One Eight Left, taxi via Mike, Charlie, Charlie One Two, Hold short runway One Eight Left However, on very rare occasions in the past (1 out of 20 flights?), I also got the taxi path showing up in the rounded rectangles section of the UI (upper right). I haven't seen that for some time now. Is there some option or condition that allows the taxi path to also appear in the upper right information section? Mike