PMDG 737NGX | 737NGXu

anyone one know if there is a tutorial out there. I know most stuff but I really dont want to read through a thousand pages :(

I have been "reusing" dx10 preview mode once again after a couple of years without it... what a difference on the NGX! fluidity ... way better than the dx9 mode, LESS STUTTERS, higher FR by about 20% more FR than in the dx9 mode... way obvious frame rates are way up, more stable throughout the entire experience from VC head movement, to ezdok positions etc etc... and I can now run in my vc with most details up (scenery dense, autogen dense) and about 30 to 40 FPS!! yes, that's way more than I was getting under dx9.. where i was happy with 20 to 30 but stuttery even with an external limiter.... this is all on my gtx280m laptop machine ...so your experience will be far diff…

Ok Gents, we have the Xrossfedd on fuel as i understand it you use it to balance the tanks etc. if you have diffrent values in it, say left and right tank have diff on values center is empty, do you just turn on Xrossfeed to balance the tanks and it wil balance it automatecly?

Hi Pmdg team, Just a quick question which I have not seen asked as yet. When do exspect to release the SDK for 737ngx ? Oh great job on the sim love it. I have goflight hardware and look forward to using it with this great sim.

OK For starters ive had nothing buy issues so far after installing the PMGDNGX 737-8900.I Love the plane and want to contine to use it. I have two computers and ive goten the PMDG NGX to work on my old computer somewhat properly.Ive been working with a friend for a few days trying to get it right.So far im having the issue of my cabin lights turning on but not my tail and wing lights.Ive got every thing set up right as far as controls and keys.Ive also got a Highend graphics card and 500 watt power supply in the machine. im also having the issue with the liverys instaler.It seem to want to stop working when i try to install a livery. Ive gone in and checked up on this mat…

Can anyone explain my problem with the exterior lights? No lights at all and aircraft is divided in to two parts by white/red square. Parts of the fuselage are even flying above the aircraft. Problem starts immediately after selection of aircraft with fresh start. Graphic card GForce 9600 GT. Looking forward to any solution.

Today I wanted to make a flight form Brussels to Monastir and make a DME Arc approach. This is what it showed after having programmed the route,legs and Init Ref: Fuel : FullPayload : Full and 2x 2500 cargo Act Perf InitGW 174.7 ZFW 128.6Cost Index 40CRZ Alt 330Trans Alt 5500 N1 Limit40 SEL/DATTO-2 22KCLB-1 TakeOff RefFlaps 10CG 20.5% Trim 6.54 The V speeds stay empty, so surely I made a mistake. Anyone knows where I went wrong ?

Guys and Gals Anyone got a clue where I can get help on EZDok. I just cannot get it to work. There is no category here in Avsim for EZDok.So maybe someone here knows whom to ask or naybe you know something that will help me. This is so frustrating.@*&%£$"^&()&^&£%^$@::*£$&$ Thx Ian

When will we be able to get the boxed version of the NGX and will anyone else be selling it.Thanks,Ron

Watch what its next for the 737: More infor at: http://www.newairplane.com/737/737Max So PMDG, what are you going to do about that?

Just wondering if anyone else has had this issue. I was practicing approaches and when I run the instant replay the airspeed indicator and HGS do not display any information. Also my spoilers were still deployed from when I landed. I don't have this happen with my other aircraft.

I have followed various threads on this problem. I do have HIGHMEMFIX=1and TEXTURE_MAX_LOAD=4096 but I still have an empty space when I turn backwards with just wings and other bits of the plane showing.Is there a fix to this. Peter Rowan

Was thinking maybe it would help the Dev Team track this issue down if they could find similarities in Hardware and Software configurations. So lets give it a shot? Please only post revelant information and if your not having a problem then good for you, save the thread for those that are. This is for the 737-NGX Crashes and Freezes only!

Hello All, Tonight I achieved a milestone in my sim world. I did a flight from EGPF(Glasgow) - EHAM(Amsterdam Schipol) in the VC 737NGX without any problems whatsoever and a magical landing with the HUD at RW36. Previously I had freezes at startup and posted same to Ticket Support. The other day I reinstalled the 737 without Hotfixes, cut back on FS sliders and when the aircraft initialised on runway in VC mode I pressed F9 just to establish it was in VC mode. I am by no stretch of the imagination suggesting that what I did was a Fix but it worked for me and after loading flight etc., the aircraft behaved as I knew it would, even panning around the cockpit and opening …

I've noticed that my standby attitude indicator is not working (analog version). Altimetter and RMI are working fine, but AH is not moving and stays at level position. I've tried to pull the uncage knob and changing the mode button, ILS bars are moving. Is this working right for you? Regards!

Thanks guys for this new repaint.Handsome work as usual. (available in the PMDG download pages since today for those, like me, who love Morocco and the RAM fleet)

Just landed in NYC as leg two of my deliveries for LH, boy that was one scary landing, but the end result was quite satisfying! On a side note, be safe and sound anyone in there!

Not sure if i missed something here on the forums, tried to do a search but came up with nothing - basically i have seen SS's and videos of users and u can see the wing from looking over and behind in the VC?Tried all sorts of zoom settings etc, but still cant manage to see the wing tips when i look over my shoulders! Is this available for TRACK IR users only? - something i am getting in a couple of weeks Thanks Kye

Enroute to Miami! Enjoy.

For those of you who are having issues with CTD's etc, how many of you are using some form of GPU fan contol. I have been using MSI afterburner. http://event.msi.com/vga/afterburner/download.htm It has a very small footprint, and I run it on every flight. I am not proposing this as a fix, but under certain circumstances, if your GPU does get too hot, and your fans are only running at 40%, there is a good chance you will end up looking at your desktop.Just a tip, not a fix. Julian Evans

is it true i can put it on any aircraft? i thought i saw a post about it cant seem to find it. so?

Just a few Screenshots, hope you enjoyed it!

apologies if thios has been asked. but is it possible to do a shared cockput in the NGX, and if yes, is it possible to do on VATSIM?

for a 1200nm flight not over water, is 7,000lbs about right at touchdown? Im not looking at being perfect with 30min reserve etc ( i dont even know how to calculate that). Mitch Bowman

Ok gents and ladies Anti Ice, Engine, Wing when to use..... ;)