PMDG 737NGX | 737NGXu

I have above problem when airborne, sometimes after 5 min. and sometimes after 1hour of flying. When it first begins I can't stop it again. I have tryed to reinstall the ngx, but the problem is still there. Do any of you have a solution to this problem?

For some reason KECP was not there. Had to TO/GA to avoid touching down in someone's backyard. All settings in FMS were correct, it's just FSX didn't have it there. If anyone of you feels like checking it out. Curious to see if it is me or FSX. ps last time i went to Tampa it was there but way off position wise, also runaways not right...

At the present time I use version 1.10..3219 and I intend to upgrade to version 1.10.6461 as explained in the PMDG Operation center ( see below ) 1) Visit http://www.precisionmanuals.com 2) Log-in to your eCommerce account. 3) Click on "View Previous Orders" 4) Use this page to download the installer required. Up to #3 everything is ok but when it comes to #4 I do not understand anymore.Which installer is required ? Also I wonder what the difference between the two versions are and if I can get them using a different approach. Your help is appreciated

An updated PMDG737 NGX module 4.3 has been released for users of LINDA. A number additional buttons and selectors have been added with full animation. It has been fully tested on P3D v3.2. http://www.avsim.com/topic/341971-pmdg-737-ngx-module-43-new/ Andrew Gransden

my VNAV wont activate and I'm at FL390 help. it wouldn't activate on the ground BTW

When getting cleared for takeoff and landing, ATC recites the latest wind info. What do we do with this info? Is it just a mental note? Are we supposed to enter that into the FMC (takeoff)? Surely we don't have time to recalculate the thrust settings... is there some range the pilot is looking for to stay within to ensure the takeoff setting are still valid? What if the winds change enough to warrant recalculating takeoff settings? Does he pull the plane aside and tell ATC to hold up while I reconfigure? Does that ever happen?

Can anyone suggest any UK/Europe tutorials for PMDG 737NGX? I've done the two tutorials that come with the software, and also found the Fred Clausen and Timothy Metzinger tutorials (which are US-based). I'd like to find some more UK and Europe tutorials too - although flying the aircraft is unrelated to location, I'd like to use the tutorials to become more familiar with airways, waypoints, airports, etc in the Europe and I'm not quite ready to just experiment myself yet! Charlie Woods

Anyone been using this - https://itunes.apple.com/gb/app/boeing-onboard-performance/id584211407?mt= Seems good? Better than paying for topcat!!!

At high altitude (plus 20k feet) my 737 commences to tremble or vibrate. Inside the cockpit all is smooth, but looking from the cockpit to the horizon the shaking is very noticeable. Any suggestion on a solution?

I can tell that the inside of the plane is well designed with seats and upholstery. Does this mean is possible to go visit the back of the 737? Andrea De Biase

hello, can someone please make the Regent Airways livery for PMDG 737NGX. its going on youtube so please help

HI, i use FsX and Pmdg 737. I've Mcp by Cp Flight, throttle quadrant by Fsc, cdu by Opencockpits and Saitek modules. I've just buyed 737 Overhead by Vr Insight. The overhead works about switches and konbs, but the annunciators lights no, it's all dark. Even rthe numbers of electrical panel and pressurtization selector, don't work, I see a lot of 8 in the dwindows. Obviously, I've the "enbladatabroadcast" active in options.ini. Someone can help me? Thank you Luca Italy

Hello everyone. I am looking for to configure the programs, the weights(DOW, MTOW,Fuel Capaticity, etc...) for my PMDG winglets (livery austrian airlines)! Which values should I enter so Efass and Topcat with my PMDG match? I've already read many postings, but there are always different opinions! Thanks for your help. Wolfgang

I'm running Prepar3Dv3 with PMDG 737 installed. Everything appears to work just fine with the exception I have no Nav or Strobe light display. Help would be appreciated. Thanks. Bob Catherall

Is there any plans for a service pack to incorporate a multi-crew environment with the NGX?

Recently, the display in the HGS is gone. Not sure if this is the result from anti-virus on the computer, or a corrupted file. Any suggestions?

On the NGX speed indicator I always see a white pointer when I am on approach. It is somewhere around 140-150 knots, and seems to stay at one speed. I cannot find anywhere in the documentation the meaning of the pointer, and I have looked everywhere. Any help would be appreciated.

Hello, to anybody who can make Liveries for the PMDG 737NGX with winglets. could you please make one for regent airways. Thanks In Advance Cheotic52

I just have a cheap throttle, which came with the Saitek Pro flight System. (Had it for years now) Just of late I have been experimenting with the A/T settings in the MENU. As you are probably aware there is a A/T overide option in the MENU. IN HOLD ARM/MODE ONLY NEVER ALWAYS What is the best option to use for a none expensive throttle? If you were in the real 737NG and you were flying level at FL250, with VNAV and LNAV on, and with the A/T on. What would happen if you pulled back on the throttle? Would it go back to the selected speed chosen speed in the cruise page in the CDU? I tried all of these settings. The 'IN HOLD ARM/MODE ONLY' jus…

Is it possible while cruising at high altitude to reset the FMC to the same initial status when you are parked and just started planning your flight? i know i can punch in a new destination but i am having a hard time deleting the exiting one. Also, once activated and executed a route i think is not possible to program the winds aloft. I can do it but only earlier and it is unclear to me exactly when i lose this option. thank you Andrea De Biase

I have an Open Cockpits 737 yoke that has an autopilot off button. However, when it is pressed in PMDG NGX (P3D) nothing happens and the autopilot remains engaged. I have it set in the FSUIPC but as I said, nothing happens when it is pressed. Is there anything that can be done here? Any ideas at all, please?

I downloaded the -800/-900 paint kit archive from the PMDG site and can't extract it. I get error message indicating that it may be corrupt. Is this a known issue ? Can it be fixed ? I tried re-downloading it with Firefox (vice IE) and it made no difference. The -600 archive extracted without issue. Best to all, Ken Boardman

I have PMDG737 Tutor files in P3Dv3.1 all loading and flying ok: F:\Lockheed Martin\Prepar3D v3\PMDG\PMDG 737 NGX\PanelState C:\Users\Vaughan\Documents\Prepar3D v3 Files But, in FSX I only have files here: F:\Lockheed Martin\Prepar3D v3\PMDG\PMDG 737 NGX\PanelState And I may have copied these from from the P3d folder some time ago when I got my new PC .. cannot recall but the are the same as the ones in P3D at any rate. No PMDG files in here ... where FSX would expect to load them from. C:\Users\Vaughan\Documents\Flight Simulator X Files I got a new PC some months ago and downloaded the newest installers for P3D and FSX and the PMDG Ops center says all is up to date.…

Hi I've just install 737NGX and no Nav or strobe lights show. Landing lights okay. I'm using Prepar3Dv3.

I just realized that I missed an update for the PMDG B737. What is the best way to update to the newest version? I purchased through the PMDG store and still have a link in my account. Will that download the latest version? Do I need to delete the previous version first or install it right over the current?