PMDG 737NGX | 737NGXu

Hello, I started a little project a few months where my goal was to paint every aircraft in TUIfly Nordic's fleet, and now that I have reached my goal, I have continued to paint aircrafts from the other airlines of World of TUI. I just wanted to share them here, and I as I am updating them continuously, I would rather have them in a Dropbox-folder instead of uploading them to the library here at Avsim. If you want to have a look at them, check them out here: https://www.dropbox.com/sh/44fne26dp4m7t7p/uRsENA1AbU Here is a couple of previews for you as well I am sorry for the double posts, but it I received an error-message when i tried to post the thr…

I am trying to set the cabin pressure in the PMDG 737 with a rotary encoder, I have no problem increasing the cabin pressure in increments of 500 when I turn the rotary shaft clockwise. When I turn the shaft counterclockwise it continues to increase the cabin pressure, How can I get it to decrease? I've tried different parameter combinations without success.. Flightman49

Will there be a patch for NGX 737 FSX Steam to P3D? It is the only payware plane that I have not moved to P3D.I have got so many problems with FSX Steam that I want to shut it down when I have moved the last plane.

I have had the same problem with the new ngx.At one time it did not lock to the loc n the glideslope n my aircraft was off course n too high. I wrote to pmdg n they told me to look at the tutorial which i did but i am doing everything ok to me

Hi, Having just updated my 737-600/700/800/900 today from SP1C to SP1D and I have noticed one change so far, that I'm not sure is intended....? When the 737 auto throttle was disconnected before the update, it required two pushes; 1. to disconnect 2. to supress the flashing A/T warning light. After updating to 1D, the warning light flashes once then extinguishes after only one press of the switch. Have only tried it so far on my current test flight in the -800, but wondered is this a change, or is it now a configurable items tucked away somewhere? Is anyone else noticing this? Many thanks in advance, Graham.

For anyone using FS2Crew for the NGX it has now been updated to version 2 and includes both emergencies and some other new stuff :smile:

Hi guys, First of all i'm french, and my english isn't very good, but i will do my best. I'm actually doing a repaint of the 737NGX 800/900 but i have an error with one file: pmdg_737NGX_tail I already did the repaint of the fuselage with photoshop, but now i want to continue with the "tail file" and it doesn't open In french I have the error: "Impossible d'effectuer cette opération en raison d'une fin de fichier inattendue" as "Can't perform this operation because of an unexpected end of the file" Hope i was clear enough, and you get the solution Thanks a lot

Which one is best overall for game reliability/performance? I'm with FSX now and have been wrestling with random freezing, CTD's, and OOM's.

Hi all, I have bought the PMDG 737 NGX base pack and the expansion. Both are SP1D. When I have installed the expansion package it asks for a serial, I put my serial and then it says: succesfully activated. When I click at fly now by FSX, the expansion pack works for 20-30 seconds and then it freezes, screens aren't black, but it freezes completely. The base package works good, no any freezes. I have the PMDG 737 base pack boxed version of Aerosoft and the PMDG 737 expansion is a download of Aersoft, not from the PMDG Ecommence. Could anybody help me, please? Thanks for your help and support! Yours faithfully, Koray (Kd555)

I know that you can change the sound device for the 737NGX-specific sounds via the options in the FMC, but this seems to apply to all NGX sounds. I would like to use a separate sound device for e.g. the voice callouts. Mixing the voice callouts with e.g. the engine sounds or ambient sounds in the same speakers is not very realistic. Is this possible somehow, or do I have to disable the 737NGX callouts and use some separate software like PM sounds instead?

Hello! Sometimes, I get the "Auto Fail" Led on during cruise flight. I think this mean a problem with air condition.After a time, the Led goes off. What is the correct reaction todo when this problem occurs?

Hi there. Today I was downloading some liveries through the PMDG Operations center and I noticed that in the "version" tab it says that my CD version is outdated: But when I click on the "download update" icon a .txt pops up saying this: So here I am asking why I am able to download liveries but not patches for my NGX CD version? How is that solution comming along for us CD customers? Regards, Daniel.

My last three flights all ended in disaster or near disaster. Preparations went smoothly as always, take off normal. However, the outside air temperature decreases way too slowly and the aircraft is hardly able to climb. After a very long time cruise altitude is reached (or not if the flight is a bit shorter). Outside air temperature is about -9 degrees at 35000 ft. Descent seems normal but on final the aircraft starts to behave very oddly. I get a constant "buffet alert" in the FMC, the engines will not power up, with or without auto throttle engaged or they will power up but I still get a "thrust required" warning and the aircraft is sinking alarmingly. The aircraft d…

http://tinypic.com/r/2qb691g/9 Hi PMDG, After a fresh install of P3D v 3.2, I have problems in my VC. Strange flickering textures like blocks/diamant shape. See pictures. Do you have any solution or tips for me? Thanks, Frits

Today I reinstalled my 737NGX using my CD box. When I enter the registration key I got with it I get this message: Any thoughts? Daniel Santos

I don't have PMDG in the addon manager in FSX-SE. I need to know how to open the freight door on the 737, when painted UPS or FEDX. I tried using , FMS, didn't work. Any help. Thanks Stanford

Need a new rig specifically for FSX and the 737NGX, perhaps P3D down the road...will see. Is anyone flying on a AMD FX8350 processor (which is half the price of an i7) and does it work fine? i know Intel is better but...is it worth the extra $150? thanks Andrea De Biase

I know this has been previously addressed, however I'd like to inquire again seeing as I haven't seen a post regarding this topic for a year or so. (maybe I missed one) But out of curiosity could a split scimitar winglets be released similarly to how the P-8 was done? The only reason I am interested in this is because I fly fly allot and I haven't seen a 737 in while that doesn't have these new winglets, I fly United allot so I'm not exactly familiar with other airlines however I have seen that southwest, delta, Alaska, westjet, and Aeromexico all seem to be fitting their fleets with them. Thanks

Hello I want to use a encoder with the PMDG737NGX SDK (for FSUIPC). What value do i need to give to the variable for the value go down? for exemple this one: EVT_MPM_N1SET_CONTROL (70099) Thanks Robert Rodriguez

I've posted this on navigraph support and the support team said its all working on there side. So i'm hoping someone here can load up the NGX at LGAV, select runway 21R VOR approach with the KRO TRANS. Then confirm if the magenta track is different to what is on the LIDO VOR 21R chart. Here is a picture https://www.dropbox.com/s/1toqwezcy6fnkot/Photo%2009-04-2016%2C%2012%2025%2038.jpg?dl=0 You can see the magenta track pretrudes out like a finger shape rather than turn left inbound 215* Anyone getting this strange pattern on there 1604 AIRAC Thankyou NGX simmers !!!!

Hello, when I try to download the Paintkit for the 737-800/900 I only have 218mb. The size should be 454mb. It seems to be broken. Does someone have the Paintkit and can upload it somewhere? I need to paint something Regards, Fips

Good Morning, I had to reinstall the complete FSX. Now I tried to install the 737NGX but windows tell me it is already installed. I cannot see the planes on my FSX airplanes choice. How do I fix this Thank you Jose Washington Carbon Processor Intel Core i5-4460 CPU@ 3.20Hz' Memory 8GB Windows 7 64 bit OS

Without disabling etops in the options Any painter know how to make that etops "qualified for ext over water operations" texture transparent? -David Lee

I'm finally getting into VATSIM with this plane and had a question about the equipment code- I understand VATSIM keeps it simple, so I'm assuming the code should look something like T/738/L Their equipment listing is here: https://www.vatsim.net/pilot-resource-centre/general-lessons/choosing-equipment-code IF anyone has anything else to add to this topic to help me learn that would be appreciated. To this point I've been flying SIDS, STARS, RNAV approaches, obviously the GPS is working along with the IRS's, I could use VOR's & VORTAC's for navigation if I had to, obviously use the ILS.. and well the FIX feature of the FMC pretty much for any navaid in…

I can't find my Livery Manager from the PMDG root folder. I have a legit copy from 737-800 NGX. Help? I found the solution.