PMDG 737NGX | 737NGXu

Hello, I am planning to buy 737-900 pmdg and want to know if there is a Jet Airways and Spicejet 737-900 liveries? Please let me know and oblige. Thank you Satbeer Singh

Hi, I bought the PMDG737NGX in 2014 and I installed in my pc, but yesterday I rebooted my pc and forget to uninstall the Key. Now I tried to install again and I received a ERRO code saying that I have a problem with my registration.

I am trying to better understand how is it possible that the FMC, after setting winds, fuel, payload, runway departure, GW and more.....is telling me that i am good to go and Topcat instead disagrees, telling me for example that i am 20K pounds too heavy. Of course i do go with what Topcat tells me and drop some cargo (and btw it works very well) but i was curious to know what is the big difference between the two, what main variable makes topcat really necessary and why can't the FMC do the whole job. thanks

I've been out of FSX for a couple of years. I just installed FSX and PMDG 737 on this computer. I have no skin on the aircraft. It's like Wonder Woman's aircraft. In the external view, I see all of the internal seats and control panels on the aircraft, but no skin. When in the cockpit view, everything is floating in the air. Does anyone know how to fix this or can you point me to a thread that addresses this issue?

This is my first post regarding the PMDG 737. I just purchased Lockheed Martin's P3D, after getting it installed on my computer, I went and purchased the PMDG 737 for the P3D license, I got a receipt back and was charged for the purchase, I went into my previous purchase and I get a message that says You currently do not have any previous orders in this store. I purchased the PMDG 737 directly from the website. How is it possible that I don't have any previous orders in the store when I was charged for the product? I wasn't sent a download link or anything to my email. I need some help getting the issue resolved or I will be asking for a refund of my money for a prod…

Hello, I have P3D v3 and the actual 737NGX + 6700 addon, both version 1.10.6461. When I try to take off, the engines can only accelerate me to 40knots with 100% N1. But often the engines, running normal in idle dont react to the thruestlevers. They move in virtual cockipit forward, the same when I set TOGA with armed autrothrust or give reverse but N1 doesnt move. When I switch to th simulators map, where I can move the aircraft, set an altitude and speed, im up in the air and everything works from this moment properly. I just tried to reinstall, but it doesnt helps. Kind regards Michael

hello, does anyone know why when i load the PMDG 737NGX i see a blue square with Microsoft Flight sim and when i load the FMC or press the PFD it comes up like this then disappears http://prntscr.com/br7fiy is there a way to fix it

looking for someone to paint the pmdg 737 for my VA. pm me.

Hi!! I'm tryng to download the new update from de PMDG web page (NGX Sp1), but after register and going to my account only appears the possibility to download the original base âckage. I'm not able to find the new versión. What must I do to download it? Many thanks. Regards, Javier

I don't know if I am missing something or what is going on,but I have been flying the 737 for a couple of years but all of a sudden my plane does'nt flare when I land and that gives me a 745fpm landing.I can land myself but when you don't expect it to land like that it take you by suprise.

I am trying to add a new view with FO's MasterCaution These are the lines in my panel.cfg: [Window37] Background_color=0,0,0 size_mm=47,23 window_size_ratio=1.000 position=0 visible=0 ident=10037 window_size= 0.100, 0.100 window_pos= 0.000, 0.000 gauge00=PMDG_737NGX!MasterCautionSystem_FO, -51,-5,100,42 The gauge appears as expected BUT is inoperative! Not clickable and not lighting When I try with PMDG_737NGX!MasterCautionSystem_Captain all is OK Any ideas?

Hi Guys! In my NGX I've never heard the "windshear, windshear, windshear" audio warning. I know there is windshear I can feel it and it is set up under weather in FSX. Anybody else know about this?

So I have been a PMDG flyer for awhile now and still to this day don't know how to get auto navigation running so the plane flies with the pink line on the cockpit displays. Best I have done so far was use the heading switch and turn it when I need to turn but it would be nice to get the plane to auto turn and land if possible. Now I import RTE route files from Sim routes so I don't know if that would work or not. So what should I do?

I have been using taxi lights to taxi to the runway, and when taking the runway for takeoff, turning off the taxi lights and turning on the landing lights. The illumination I get from the landing lights following this procedure, doesn't seem as bright as it would be in the real aircraft, as far as illuminating the runway surface. Last night I didn't turn off the taxi light ( by accident) , and noticed that the runway illumination when I switched on the landing lights was much brighter and what I would consider to be more like real life. I can easily duplicate this by setting the aircraft on the runway, turning on all four landing light switches and then turning on the ta…

Hi, I have recently download the expansion pack for the 737. The 600-700 pack. After installation and activation were successful, I started the sim and fired up the aircraft. To my splendor it was functioning correctly.............for about the first 20 seconds after initialization. After that. the camera bounced very slightly, like something had been loaded. All screens were functional, but they were stuck. If I moved the throttles, the EGT displays stay the same. The FMC buttons would all work but screen has no response. Same thing for all buttons and switches. Funny thing is its like the plane is there but its like paused or something. Like stuck in time. Sounds respon…

When I open this file up its path is for FSX. When I attempt to change the path to my P3D I get both Hi and Low Res checked and cannot uncheck the High Res. Is there a file update to correct this? Thanks Randy

Hi! P3d crashed and froze my pc today. Did a complete reinstall (no addons) and everything worked fine. Installed the 737 ngx and loaded it up - all screens black and no click spots working. Did all of the things in the readme file - now the vehicle menu won't load. Uninstalled the aircraft - vehicle menu is still not loading. Did a complete reinstall of p3d again, and redid the steps mentioned above - still got the same outcome. Any suggestions? This might ofc be a p3d problem, but I have to start asking somewhere:) My specs are: i7 6700K 4.0ghz GTX 980 16gb ram Windows 10 pro Best regards

Hi. My cockpit look blurry! Latest update, FSX on Windows 10. Nvidia and Nvidia Inspector used. Any setting in the Inspector to fix this?

I recently noticed that the NGX keeps burning fuel while I navigate the menus in FSX. For example if I open the FSX map or the FSUIPC menu for a couple of minutes, the fuel amount drops significantly when I return to the flight. This screenshot shows the intial fuel values: I then open the FSUIPC menu for two minutes, and when I close it and get back to the cockpit, the fuel value has changed: This does only happen when I use the menu dialogs in FSX. When pausing/unpausing the sim, the fuel value doesn't change (as expected). I have done the same test with the default 737, and this behaves normally. The reason I discovered this issue was the large amou…

Where can I find performance tables for the 737-800 SFP (with bump 27K)? I'm lookg specifically for the 737 SFP 27K MTOW in SBRJ (which has 1320 m long runway)... Thanks!

Hello guys, i have a weird problem on my NGX, if i'm in hte cockpit with the engines running and my visual point is straight ahed on the rwy i can't hear the engine sound but only the cockpit enviromental sound...if my visual is turned around the cockpit i hear the engine sound... how is it possible? and how can i fix it? with the 777 i don't have this problem it works perfectly! and also others addons thnx

I have a CH Products Throttle Quadrant, trying to assign two of the levers to the two engine fuel switches. I'm using the default PMDG assignments Shift+Control+F1/F2/F3/F4. This makes it easy to assign buttons but I want to use two of the axis' on the controller. Too easy to bump a button by mistake and shut an engine down. I need it to be aircraft specific as I don't want to affect the levers which are working perfectly as Condition Levers in prop aircraft such as the Dash 8. Currently these two levers are not being used in my NGX so if this is possible, can someone let me know how to do it as I am not winning. I don't seem to be able to assign an axis with a custom…

On a flight today, after selecting the arrival procedure in the FMS, the T/D point along the flight path was flashing at high frequency between two points approx 5 nm apart. I also noticed the deceleration points further along the flight path were moving rapidly in unison. Seems the system was confused about two separate T/D points. I did have decent winds in the Forecast page as per PFPX. Running ASN weather. I did change the arrival procedure in the FMS once, same runway, just removing the Transition. Maybe this initiated the problem? Something I have done wrong? Maybe a known issue with the sim? On reaching the first of these duel flashing T/D points, aircraft …

Hi, i see in many videos that the user change view to FMC, Overhead Panel etc with a nice transition effect/zoom. Are these preset hotkey ? If not how do i set it up ?

All shots are unedited - apologies if this is off topic! But the title speaks for itself here really..Specs are in my signature