MS FSX | FSX-SE Forum

Some of the time taxi steering is very stable, at other times wants to wander either left or right. I see a number of posts relative to P factor and torgue, but rolling at idle throttle or particularly with a jet this should not be a problem on the ground. Under Realism Settings, P Factor, and Torgue are turned off. Now what really is strange: Upon landing at my destination airport, taxi sensitivity is always very stable and the aircraft will taxi in a straight line. This is not aircraft, location, or flightplan specific. By that I mean with any aircraft or same conditions, this problem may or may not show up. Respectfully: RTH

Hi, I'im interested in Aerosoft's CRJ series, but noticed that it uses a proprietary flight plan format. Is there a way to convert FSX-Steam generated flight plans to that format? I downloaded "Litte Navmap" but don't see the option to do so. Any other programs that might do the conversion (not seeing the option in SimBrief either)? Thanks! (Never mind: figured it out, using SimBrief)

Hello. I believe my FSX has been compromised. First, I got a security warning when FSX launched. I thought it was nothing and clicked allow. But then I selected the QW757-200 Icelandair and FSX crashed with no explanation. I tried it again, and it crashed again. A quick scan from my anti virus found no threats. Is there any way I can remove this? I believe whatever that security warning was about is causing this. I'm using FSXSE on Windows 10

I was doing a night time approach yesterday. All the runway lights were a blurry mess, with huge blobs. I have Ultimate Terrain Europe from Flight1 installed, and the airport was Aerosoft Nice Airport. Any ideas as to what might be going on? Thanks!

Yesterday I installed the 777-200ER from Rikoooo. Selected FSX Steam edition, which is what I use. After install the plane appeares in the FSX list of airplanes but when selected it lacks color. It's completely white. The panel is white too and has no instruments. Checked the Boeing_777_200ER_OP folder and found the usual model, panel, sound, texture files. Also checked the configData\dll.xml file. The readme says that installation adds lines to this file. However, the file date is unchanged, so clearly it's not touched by the installation. The Modules folder contains 2 dll files beginning with jb777. So the only anomaly is the dll.xml file which is untouched. The in…

Hello everyone! Can someone help me with error in LEVELD 767 and SKYSPIRIT 767 merge? Everything goes perfect till I reach CRZ and VNAV PATH mode is active. The FMC goes to DES mide for rest of the flight, and no ETA or fuel predictions. Please help Thanks

I've just got into the various floatplanes for FSX (and P3D) and I noticed that in some aircraft, while moored, there are sounds of the water laping etc. whereas in others there's none of these sounds. Is this something I can add to aircraft at all?

I know there's not many of us about, but there are hopefully other owners of this IMHO nice, if slightly overpriced MD-11 who have noticed this "anomaly" When she is cruising at altitude (FL370 to FL410) at the usual speed of M0.84 the Sky Sim MD exhibits a nose up attitude which to my eyes appears a little exaggerated. I know most airliners fly in the cruise with a slight nose up attitude, but please hear me out if you would. This visual nose up attitude is compounded by the horizontal stabiliser pointing several degrees down at its leading edge. I believe I've mentioned in another post that the synoptic displays where stabiliser angle is displayed seems rather…

Hello, I've been flying this wonderful aircraft for a few years. Version 3.14. I'm migrating to a new computer. I installed 3.12 and it works fine. Then I updated to 3.14 but the zip file is missing the air file and FSX complains it can't load the flight model. If I change aircraft.cfg so sim=Douglas_DC3_v1.4, it flys, but its the 3.12 version. The file seems to be missing from the 3.14 zip files. I've downloaded from here and another site. Same thing.

I have been for some year flying X-Plane 10. Now I am back to FSX and find that Minipal, that worked before without a problem, now it doesn't appear, however the panel.cfg I think is OK. Some help? Thank you. ; Localized 09/08/2006 04:53 PM (GMT) 4:4.2.169 PANEL.CFG ;/ Panel Configuration file ;/ Beech King Air 350 ;/ Copyright (c) 1999-2003 Microsoft Corporation. All rights reserved. [Window Titles] window00=Panel principal window01=Grupo de radio Window02=GPS window03=FMC window04=Cuadrante de aceleración window05=Indicador de advertencia window06=Brújula window07=Compensador window08=Combustible Window09=Panel de IFR Window10=…

As the title says, out of the two Carenado aircraft what one should I lead to?

Since the SP2 installation is identical for both, I wonder. Does SP2 contain Deluxe features such as the G1000 and better scenery/airports in selected areas?

REX 4 is reasonably cheap at the moment so I began to investigate it. I am fully aware that it "only" gives you better, more realistic cloud textures and more. I know it is not a weather engine, although it will check a METAR and create a theme for your departure airport. My question is this - I decide to fly from EGCC, long distance over to say, Rome. Manchester is nice and sunny with a few fluffy Cumulus clouds (REX presumably sets that theme up). I have a weather engine to inject real world METARS as I fly along. Suppose that the METARS for airports near the alps say that there is extensive CB and thunderstorms in the area. Would FSX show me that using REX4 theme …

Hello, I'm looking for a LTAY scenery. No matter if paid or not. Must be realistic. Thanks

You will not receive support from Sky Simulations when using these mods! Requires an installation of the v2 release with SP1. Compatibility with the P3D version is not guaranteed and will not be supported. Will not work in the FS9 and v1 releases. Content: Rebuilt and enhanced cockpit sound environment New GPWS system New first officer callouts Load/save module with autosave/load functionality Various rebuilt or bugfixed instruments Rebuilt systems files Realistic autopilot speed hold modes Realistic autothrottle handling Realistic fuel and hydraulic systems including expanded failure modes Aircraft manager for loading, saving and paload/fuel/door handling "Sm…

hello! my name is Ido Atzmon and I have purchased FSX SE About 3 years ago. I had a really fun time with it. before 2weeks something with my sim went wrong.. I had a lot of add-ons and everything was running great!. good fps and everything. but before 2 weeks the game started to look weird. my terrain is blurry. only a small area at the airport I go to is not blurry and looking right. I tried everything in the forums I am super mad about the fact that I have terrain it's just so blurry. at every airport I land at the scenery I have installed is covered by the ugly blurry terrain. I will appreciate so much if you can help me it means so much to me!I think the problem is th…

I've been playing FSX SE for about 2 months now on a PC running windows 10 pro. The game has been working fine until recently when the engine sounds on all the planes stopped working. The other sounds like warnings and ATC are all working fine but i just can't hear any plane's engines. I deleted and reinstalled the game thrice and even checked the sound card but nothing seems to work. Any help would be greatly appreciated.

Hello everyone, My simulator was working just fine until 2 days back, the aircraft is not stable on the runway. Whenever at a high speed, the use of rudder makes it bend over to a side of a wing instead of moving the tires. Please help me with this issue. I have Reinstalled the Simulator and tried stock aircrafts too, but the problem is same. I have also checked this issue on various different airport sceneries too.

Hello all Running Windows 10 Couple of issues 1. After I installed Traffic X and boot up FSX Steam, I get several error messages "Multiple objects with same title". I went to the Air craft config file in my App data, but did not find any multiple SimObjects references in the [Main] section. When I start FSX Steam, The error messages are as follows; simobjects\jftraffic360\justflightctrltowerairfied, justflightctrltowerairport, justflightctrltowerlargeintairport, justflightctrltowermedintairport, ,justflightfollowme_L,justflightfollowme_R, justflightpushback,justflightspotty. Is there anyway to fix this problem without having to rei…

Hi just wondering if anyone knew what is happening or what I’m doing wrong here. So when I start the 737 in short panel state, set parking brakes, set chocks, etc., I open the door and press control-j for the jetway. But even when I have the plane right 100% on the line, the jetway will not move. I hope someone can give me some tips or a fix if it’s to do with the plane itself

Hi this just came out this past April anyone out there tried it? Is it better than FS water config?

I realize that at some airports, particularly addons, tugs may not be displayed at a gate. I am just now realizing that I have no push-back tugs displayed anywhere, including gates that I am sure were available in the past. Note that the other ground vehicles are displayed like luggage tugs and trailers. Under options>settings>display I have Airport Vehicle Density set to maximum (full right). I fear that somewhere a line item has negated my push-back tugs, but I have no idea where to look. Respectfully: RTH

Just wondering of anyone else has raised any support tickets for the V2.0 MD-11 (including the service pack)? I orignally sent an email to them last Thursday 14/3/19 then resent it with the appropriate subject prefix of "MD-11" (as per the small print on their site). I appreciate that only 5 days have elapsed since my original email (2 days were the weekend), but the main idea of this thread is to see if any other FSX users have pointed out similar issues:- The tiller turns the opposite way in the VC Spool up sound still present upon shutting down the plane. I did get some degree of success after clicking a couple of times on the three starter switches…

couatl v3.2 (build 4061) panic log started on Thu May 9 11:55:46 2019 problem raised by engine or unspecified addon {'Airport': 'KLAS', 'User Pos': (36.08644141728471, -115.15390670229888, 666.673 m, 1.90527 m, 94.99999971875394)} Added GSX user Jetway n.2 for Gate E 3 Can somebody please help me solve this problem on where to go in FSX Steam Edition

I've been having some problems with various autopilots recently. The most common problem is the inability to follow a flight plan. This has led to me having to direct the plane entirely using the "HDG" option which is possible but takes up a lot of the pilots time. As planes get more complex they also need more attention. If however the pilot - and in FSX that is mostly a single person - is having to concentrate on keeping the plane on course then things can be missed which can lead to a disastrous situation being developed. To allow the pilot to concentrate on the important things in life it is essential to have an autopilot that can do two simple things: 1 - Follow…