MS FSX | FSX-SE Forum

Hi, I have FS2Crew for PMDG 777 aircraft and I have a bit of a problem with the software. Every time I run it, it stops in the random phase of flight. Stops as in it: 1) Does not recognize my voice inputs. 2) No Audio out of the software. No Departure Briefing sound or PA sound or Ground staff sound to disconnect GPU and Air. It does perform the flows like pre-flight flow and all others. However, I cannot run the checklist as it wont recognize my voice. Here is the steps I took: A. Checked the Volume of my comp and the audio device. B. Checked the config of the software for audio device. C. Re-installed the software. …

I'm wondering if there already is, or if someone can make an app that can be used for all different freeware add-on commercial aircraft, that can be used during flight planning to graphically show and adjust both fuel and passenger load. Maybe also showing Pax load divided by class. Maybe this could also generate Vspeeds that could be used on the Honeywell FMC that already exists. I'm assuming it would work with each individual aircraft cfg file to be created. I realize this is probably a long shot, but am asking anyway.

https://secure.simmarket.com/fspxai-boeing-737max-fsxp3d-ai-traffic.phtml It says that the aircraft contains nothing to make it a UI aircraft that is flyable! Does this mean that even if I tweak the physics and add panels, sound, etc., it still will not be flyable? Or if I do add these things can it be a flyable aircraft? Thanks all! Alexandre Trahan.

I am looking for some guidance/instructions on how to merge the Qualitywings 757 VC with the Skyspirit B763, in particular, the Boeing 767-300FER-GE-CF6-80C2 model. I work for DHL Express, and this is one of the aircraft we operate. I've googled and looked through the major FS sites and havent found anything. I have however mostly done it already, but the EICAS etc, dont illuminate, so Im doing something wrong.

Hello, I have a copy of Aivlasoft EFB v1 which I recently purchased. I have followed the complete manual procedure to install the application on a remote computer with data provider installed on the FSX machine. However, I could get it running just the way it should be except for the AI traffic not displayed on the map. I Googled the cause of the problem and could figure out one thing that in the data provider, in the AI aircraft monitor, there should be a list. Mine, shows blank. This is the problem which is causing the issue. Please help Guys! Here is one question I have. Q: In the display unit of EFB, when we are selecting the files and folder…

This is a utility that can assign give you information about real-world flights to do with your aircraft. There are ~2.3 million flights of the database, and a single click can give you a realistic route, airline, flight number, departure and arrival times, aircraft registration, and more for almost any airliner you can think of. There are historical schedules in the database as well, so now you can get realistic flights and routes to do with your classic aircraft that aren't used as much in the real world any more. A huge range of real-world flights from multiple areas of aviation are included. 707 flights for Pan-Am in the 60's, flying Tristars in and out of Kai Tak…

Hi, I use networked configuration to run ASN. It has always worked flawlessly for me until today when I installed Aivlasoft EFB(also a simconnect addon). I have no idea of what is going on but: 1. I have correctly made and placed all SimConnect files on both computers. 2. I double checked the IPv4 address. This was the reason for not connecting last time. 3. Tried reinstalling the software. But all the attempts failed. This has happened after I installed EFB and also I installed moving maps application which also uses simconnect. I uninstalled the it though. It keeps waiting for fsx to connect

I had a strange thing happen on a flight from KBFI to KBOI today. I was about 45 minutes into the flight when my screen started slowly getting darker until it went completely black. I'm running FSX-SE in Win 10 on a Dell XPS 8500 i7-3770 cpu @3.4GHz w/8GB Ram and a Nvidia GeForce GTX 1060 6GB. I have a ASUS 24" monitor that's about 5 years old, connected to the video card with a HDMI cable. I was running Active Sky 2016 and flying the PMDG DC-6. I had about 800000 of virtual memory available. Temp of the video card was about 54c. I use FSUIPC and had FSTramp running. I used the ASUS Tweak utility to turn off the unneeded background activities. I had the same p…

I have the Virtualcol DASH 8 for FSX and am having a problem with the throttles not working in the middle of a flight. I have follow the procedure tn their documentation about the limiter during taxi and make sure it is reset before taking off. Howerver everything works fine for a while and suddenly the throttles stop working althegher. bot joystick and keyboard. Has anyone else had this problem? If so did you find a solution. I have submitted it to Virturalcol support and so far they not been able to help.

I have Windows 7 64 bit.I have FSX Acceleration.Everything was running fine until I installed EZDOK.I tried it for 30 minutes and it didn't serve well.So I went ahead and uninstalled it.I then started up FSX again and noticed that I had no wing views.Also the gauges were numberless.I have PMDG 747 V3.Things were really screwed up.So I went ahead and uninstalled FSX and then re-installed everything again.When I started FSX again I had the same problem.No wing views and numberless guages.I really want to fix this.Can someone help me please?

I have FSX with Acceleration and a high end system. All seems to be running well except in external views the plane is always missing parts. It never used to do this but is doing it now after completely reinstalling FSX. Any thoughts would be greatly appreciated. Tom

I was looking around for some free mesh, looked at my scenery library and noticed that "FreemeshX" was already installed. Is this now part of the FSX-Steam edition? I never downloaded, installed or acitivated FreemeshX.

Hi Guys I mainly fly turboprops but am thinking of changing to a jet aircraft for my next video series. I am looking for a smallish jet aircraft which holds around 80 passengers and fancy getting an Embraer 170 for my virtual hanger. Ideally I would like it to be easy to learn with systems halfway between default and PMDG level, Can anyone provide any recommendations? kind regards Daz (Youtube Dkentflyer)

I reinstalled FSX and when running the program I cannot see the MENU BAR on top of the screen. The cockpit of the plane fills the entire screen.How can I make the MENU BAR visible ?? Thank your for your help. Paul 12

Hello, I was wondering if we could use fsdt gsx on a different maschine rather than the main maschine. I have simconnect finally set up! It will save a lot of ram and frame rates. Please help!

I downloaded Orbx Central, checked the Scenery Configurator and most of the default scenery has a red triangle next to them. Now, when FSX SE is started, it loads the scenery up to 38% then stops. I start PREPAR3D v.5 and there's a message that says " there's a problem and needs to shut down." Since ORBX Central has been installed neither sims are working.

When on a flight on FSX and I am taxiing and use my brakes on my rudder pedals the brake notification on the bottom left side stays applied. I have to use my CTRL key and my period key to cancel the brakes. Just wanted to know if anyone else has had this problem. If so what did you do to correct the problem. It used to be that when I used my brakes on the rudder pedals the message about brakes being applied would go off after releasing the rudder pedal brakes. As of now it does not and I have to use the keys to cancel the brake being applied message. Any info on this would be a great help to me. Thanks for your info and help in resolving this issue. Duane R.

I download Thomas Ruth Turkish Airlines A330-343E. After correctly installed the aircraft only wings are correct but Body and Engines are black. I try to turn on and turn off DX10. Please help

Hello Folks; So I finally decided to purchase Navigraph AIRAC update in order to effectively fly SID's & STAR's. Since this is my first time and very new to Navigraph stuff, I definitely need help and have specific questions to make sure I purchase the correct thing. 1St. these are the add-ons I currently have and use, other then the aircraft I am assuming I will have to update at least the Flight Planner and maybe the add-on airport. Not sure how I will update them. Aircraft: PMDG-747 V3; iFLY 747-8 V2, QW 757. All FMC will have to be updated Flight Planner: PRO ATC X, FS Commander Add-on Airports: 9 Airports Us only What else would I…

Hi, When I start FSX free flight, there is no loading bar, just a black screen. I have deleted fsx.cfg so it can regenerate, I have run it in compatibility mode, updated my drivers etc. Please help me! Thanks, William

After installing the Orbx Central, most of the default scenery has the red triangle next to them.

...is on sale for $20. Does the product still offer a significant upgrade today, considering it's over 15 years old?

Hi, I fly FSX, with a full cockpit build, Saitek and iPads, all tied together with FSUIPC. Flying ww2 aircraft in the FSX modern simulation lacks atmosphere. What could I move to, to experience exciting WW2 air combat? And could I use my Saitek cockpit? That last part is important! I've heard of Il-2. Cheers, Paul Elliott

Hi Guys I've got a clean install on Windows 7, running 2x GX580 graphics cards (previously installed on windows 10) Graphics are all set to ultra etc and all is fine apart from in 2d cockpit mode, the left side of screnery looks stretched big time. All fine on the right hand side, all perfect in spot or virtual. I haven't changed anything in caerma settings. I have orbx installed, Rex installed. Never had this issue before. Updated graphics to latest drivers too, and have played about on various graphics settings within FSX and still the same. Any help? Best way to describe it is, looking through a glass with water (on the left), almost cured, blurred an…

I downloaded A2A's B-17 to a new computer and can't get the crew voices to work. I can hear them on other aircraft and the B-17 works fine on my old computer.