MS FSX | FSX-SE Forum

I would like a better autopilot for the Carenado C310R. I would like to add the autopilot from the Carenado C182. I've been able to get it to load as a Window, but it doesn't power up. I would also like to add it under the GPS on the dash in the virtual cockpit. Is this possible? I would prefer to have the Garmin GFC 500 AP, but I don't see that anyone has reproduced this yet. Thoughts? Parts for autopilot from Carenado C310R aircraft.cfg [electrical] max_battery_voltage = 24.0 generator_alternator_voltage = 28.0 max_generator_alternator_amps = 60.0 engine_generator_map= 1,1 electric_always_available = 0 flap_motor = 0, 5 , 17.0 gear_m…

I cannot figure out how to turn on the passenger cabin lights to Chris Evans' version of Air Force One. He assembled and edited it based on the Posky 747-8i model. There's a switch in the VC instrument panel called "Cabin Light" but it doesn't seem to turn on any lights in the cockpit or passenger cabin (as seen from the outside). Does anyone know how to contact Chris Evans?

I am not sure if this is the right forum for my question/problem. After purchasing and installing FrankfurtMegaAirport ( from aerosoft ) I cannot run FSX anymore,getting the following error message: ( I also use GSX ) couatl v3.2 (build 4061) panic log started on Fri Apr 5 10:13:24 2019 problem raised by engine or unspecified addon {'Airport': 'EDDF', 'User Pos': (50.024939336687, 8.5435203679414, 113.354 m, 2.40662 m, 158.9246267594058)} Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_SODE_JW_TB_2_5_LOGO_FRA' {'Airport': 'EDDF', 'User Pos': (50.024939336687, 8.5435203679414, 113.354 m, 2.40662 m, 158.92462…

I tried this in the P3D Forum & picked up a suggestion that it only FS9. I have been on the HJG website & dug around but haven't been able to find anything that tells me which sims they build aircraft & liveries for. Hoping P3D is included, but suspect it might be FSX or earlier. Anyone know? Thanks T45

Anyone who has these products, could you let me know which one you purchased and why. Was there a reason you didn't buy the other companies version. Which one appears to be the most compatible and works the best. Opinions? Thanks

I have seen lots of YouTube stuff where everyone’s video’s have very cool clouds and cloud cover that goes all the way to the ground eg for Cat III landings. I cannot achieve these weather / cloud settings in FSX so I am guessing they are using an Add-On like AS16. Before I buy it, I would like to know if you can just create the weather conditions that you’d like to fly in (eg just create the Cat III weather conditions) for say my home airport YPPH (Perth Western Australia) or do you have to go and fly where ever those conditions exist ‘around the world’ as they exist in reality? The review I did watch on it seemed to suggest that I’d have to go find the conditions I w…

I just downloaded the ifly 747-400 freeware and the airac data on the fmc is 0511 my question is how can I get the fmc and stock airports updated so the work together at no cost to me I don't want to spend money because 1 it is tight but 2 im not a huge flying simmer so I don't really care how old the data is I just want something that works

Hello All, I have a bit of a question, and I thought what better place to come than the Best FSX Fourm I know of. Below is my Feelthere ERJ-145 **LR** Config, I have A2A Lights Redux installed. I was wondering if anyone knew which variable controlled which. By this I mean which numbers in the Sequence control which direction the lights go. I used to know but I nolonger recall, anybody know? thanks!! Derp //LIGHTS CONFIG\\ [LIGHTS] light.0 = 3, -12.8, -31.74, 2.52, fx_shockwave_navred , light.1 = 3, -12.8, 31.74, 2.52, fx_shockwave_navgre , light.2 = 2, -12.0, -31.99, 2.53, fx_shockwave_strobe_2_nl , light.3 = 2, -12.0, 31.99, …

I have the Carenado DA62 with the G1000. I’m trying to create a flight plan. If I use airports in the flight plan, it adds them fine (KDVT-KFLG-KRIW). If I try and add an identifier as a waypoint, it brings up the info (UT73 or any other UT or C0 series) and says press Enter to add, but when I press enter, nothing happens. I’ve watched pilots on YouTube add these in on a real G1000 flight plan. Am I missing something to make this work (such as something I need to update in my sim), or is this a feature that just won’t work because it’s a flight sim? Thanks

I know it's old but I thought I'd have another try at her... She keeps pitching up after takeoff...The airbus is supposed to hold the pitch that is set...I have to trim down after takeoff to hold the pitch...The trim is supposed to manage itself. Is this feature not modeled, or am I doing it wrong? The roll axis holds itself perfectly, just not the pitch...

I have been using FSX Boxed addition ever since it was launched. Now I use the FSX-SE addition. Love it for VR play as well. The problem is as time has gone by the Operating system as well as the platform have changed(boxed vs steam) and the Add-ons have installation files that are not always up to the job. In many cases, you only need to direct the installer to the FSX installation directory and it will do the rest. I have 2 Questions. The first is a much broader question. 1) Is there anything else that you need to consider with FSX-SE when installing some add-ons? Let us say aircraft. Are there other files that need to be modified other then w…

I have been trying to move my XP FSX scenery to my W7 FSX:SE insallation. The directories all moved OK. But FSX:SE is not displaying the scenery objects. But the airport information part of the files is there. Why isn't FSX:SE displaying the AddOn Scenery? Bob Macklin Seattle, Wa

Hi folks, I have a whole bunch of WOAI FPs running without issue, but cannot seem to get even the simplest that I create to run. I have a test plan Concorde Aldergrove to Heathrow (heathrow was uber busy needed a quieter area), everything seems to be set but obviously I am missing something as they don't show up. The plan validates fine. I have a few pics below. Any suggestions gratefully accepted.

hi all i am facing a problem with an overland a340. the problem is right after touchdown my elevator trim and elevator gets locked i can't put the nose wheel down it slams when the aircraft slows to 70 or 60 Knots is there anything i can edit in aircraft.cfg to resolve the issue.

Recently I purchased the Imaginesim ZSPD scenery and installed in FSX and also in P3Dv4 then after loaded the aircraft I found all jetways black in both sim. Does someone experienced the same?

I just got home from the hospital. I did a lot of thinking about FSX while I was there. My son gave me a book about military aircraft from pre-WWII till current times. I have been running FSX on a XP machine. I have had to upgrade most of my computers to W7. I take it FSX SE is the replacment for FSX. Will my old FSX sim objects and scenery work with FSX SE? Bob Macklin Seattle, Wa

Has anyone figured out how to make FSX Eyepoint views - Shift + Enter and Shift + Backspace - to work as in FS2004.or what does it takes to make a visual landing when the runway cannot be seen?

Tired of paying each month for P3D and going back to Steam FSX for awhile. I would like to know free or inexpensive ways to make it look great. There used to be a DX fixer for it but was discontinued years ago so what other ways do you guys (or gals) use to make it look as good as possible?

I am using Windows 7, FSX. My weather isn't working. What can I do to fix this? I need good step by step instructions. Thank you.

Hi all, I have recently built a new pc with an i7-8700k and rtx 2060 and downloaded fsx se. After installing, I can't for the life of me make the graphics sharp. I have nvidia inspector and I am certain it's been set up correctly however it doesn't seem to be working. Can anyone offer any advice? Thanks

Please, help. May be somebody already has this problem. Only with this plane (Majestic Dash8 v2) all sounds still playing even simulator window inactive (or not in focus). All manipulations with Control Panel - Global sound - on or off doesn't help. And second issue - there is no any smoke from runway and wheels at the touchdown moment. Majestic website is inactive now. Windows 10 Pro, FSX and P3D 4.4.

WGood evening all, I know this is probably not the best place to post such a thing but I have literally run out of ideas and I am at my last point in regards to this product. So about a year ago I purchased the Aerosoft A320/21 from Steam, it worked perfectly so I decided to go ahead and purchase the a319 etc. Fast forward a couple of months and I tried to load the aircraft up and it loaded eventually and was incredibly laggy to the point where it was around 1 FPS and al, the knobs and switches had blue boxes around them. I have emailed the support and we have tried everything from a simple reinstall to trying to repair .net files and updating drivers and everything…

Hi folks, Does anyone have a fix for the Rate bug not going to the correct amount as per the setting, apart form giving changing the rate a notch and putting it back? I know it isn't a game changer, but a bit of a pain 🙂

Hey i Have recently been getting a problem throught FSX SE. When i go to fly in a payware aircraft, when i go to put in how much fuel i want etc. it just doesn't change ! Help please Nathan

Hello there, I would have a question, I have installed the UTT Boeing 787-9 ai and the norwegian livery pack manually but it shows like this in the game: https://imgur.com/a/zNsRCqb. The tail is okay but the whole body is transparent. I have installed UTT Boeing 787-8 too with norwegian livery pack and it works fine. Any solutions?