MS FSX | FSX-SE Forum

Hi, i have been using ray smiths ADE files from AFCADS. Does anyone know will this affect MTX parkings? Thanks.

I have already asked this question in the FS2Crew Forum, but either B.York is far too busy getting the T7 stuff out, or am just getting nowhere in that particular forum, hence being asked here. Have just installed v2,0 of the FS2Crew Airbus X Button Version. Everything is configured as it should be, and I have checked the panel.cfg shows up the FS2Crew relevant entries. All there. Selected FS2Crew from the Airbus A318/319 Configurator. Select Main Button---------initializing carried out Pre-Flight carried out counting down to 30 mins before departure. Secondary Button responses work fime. Before Start Procedure-----again, select Main Button. At this stage I should be …

Hello everyone, First of all I hope I'm on the good category for what I have to ask, if not I'll gladly move the subject to the appropriate one. This being said I recently confronted a problem with my airbus X (a320). I was flying on IVAO doing an approach vectored by ATC to go and catch an ILS landing. ATC did a good job vectoring me and I heard the vocal alert saying "localizer capted" and "localizer alive" (or something along those lines I don't remember exactly) but my plane did not "follow" the localizer as it should have. I did it alot of time on various flight and it didn't failed me so I don't think it could be a human error of my own and this happened at lea…

Hi ppl. I recently purchased the A319/A318 series. I deleted all the interior cameras and ran the EZDOK config tool. Cameras work ok, but I can't get the effects to work. Random effect works but is useless. The camera is static, doesn't move when I speed up or brake, and on touchdown I don't get any ground effects. This things work ok on the NGX. Here's a video where the ground effect and dynamic movement works.

Is anyone familiar with this developer? They have some nice looking aircraft, but am not sure of their quality, systems depth, etc. Their Lockheed Hudson looks very interresting. Their link: http://silvercloud-store.com/index.php?dispatch=products.view&product_id=29903

is there any option to add VC of the A321 into FS9 IFDG A319 318 et.. if the model is MDL8MDLH one ?? into fsx of course ..

Hi always when im flying the PMDG 777 i always seem to run into a problem. im taking off and i turn the auto pilot on, as soon as i get to 5000FT the airspeed the altitude heading and the artificial horizon just start moving up down side to side. i cant seem to fix this. there are no errors turned on or anything. please help i need this fixed asap!

Hello all, After I've set up a flight plan in the Eaglesoft Citation X 2.0 FMC, when I press the "FMC" button above the PFD it is supposed to display a magenta CDI needle in the HSI but on mine for some reason it is completely missing. I've tried reinstalling the plane thinking it was a missing guage but no luck. Any suggestions on what it could be? I followed the sample flight from the manual perfectly also, but that magenta cdi needle is still missing.

Any reviews on this PC 12? I'm kind of interested in it, but will reserve my judgement until I read a review from a simmer on this forum. Stan

I've noticed My Saitek X52 Joystick Lights blink. At the same time I have no controls in FSX. I discovered that if I go to the Saitek Site and download the appropriate drivers , the lights stop blinking and I have My Controls back. It seems they start blinking after there's a re-boot. I've had a history of loosing controls in FSX and thought it was caused by FSInn or one of the other add ons like Plan G, now not so sure.

Anyone know of a new Southwest livery for Ifly's 737?

I would really like some help/advice in respect of the following; I have registered with Vatsim and will shortly download the software required. Once it is all in placed and installed I would like to play the sounds of the aircraft through my Corsair twin speakers and the Vatsim ATC through my Razer Carcharius Headphones which has the Xonar U3 soundcard adapter. I will also be using FS2 Crew and flying the 737 NGX. Can someone advise me how I set it up in order that I can have sounds out of the speakers for the aircraft sounds and the headphones for Vatsim ATC. Many thanks in anticipation. I am running on Windows 7. Michael

I really only fly amphibians for sea plane applications. I can move on dry land, so this is not a biggie, but I am curious. At least some of the time, at docks, or particularly under a partial hanger my bird drifts away with the current or wind. Is there a virtual command of any kind to secure to a dock when available. I tried setting the brake thinking that might serve the purpose, but sometimes the aircraft still drifts. Thanks: RTH

Hallo. I have FSX and many addons. Now I have a big problem with My Traffic 2013. I have no aircraft in air and on the Airport. Whats wrong? Can any help me? I have write on other forum as Aerosoft but now answer or help. Kjell

Hi Everyone, Need a little help, I am unable to download the mesh files I paid for from FSgenesis. I tried to contact support but the website doesn't let me submit a ticket. The website is terrible! Below is the email I sent. Hopefully someone can help, or perhaps the FSGenesis staff members may read this forum. Hi, I am a long time customer and (ex) lifetime member. I recently upgraded to FSX and purchased a large amount of the Nextmap mesh. I am unable to download your products, have tried from 3 separate connections in two different countries. My broadband in London is 50mb with Virgin Media, my girlfriends broadband is 30MB and my…

I'm trying to get My Reverse Thrusters and speed brakes to work. Would prefer using the keys, but could settle for My Controller. I also have the FSUIPC ( Payware ) installed. Thank you

I'm finding the a318 too much for my computer, i.e; it hangs, large patches of scenery still not loaded, then it finally closes. I don't have any problems with the 777/737 a320 with fs2crew, GSX, vfr scenery or night with extreme airports. - I thought I'd overcome OOM's I only have the scenery in use checked, which is usually fine. I've used bejotes cfg. editor. On a more positive note... it's a lovely aircraft! Love the exterior lighting, good work.

Wanting to move FSX and related files to bigger hard drive. Is there a way to do this short of starting over?

Anyone here use the Wilco A340/ Project Airbus A380 merge and get horrible fps? With just the default PA A380 I get 45+ FPS and with the default Wilco A340 I get 45+ FPS as well, but with the Wilco gauges inside the PA A380 VC I get a max of 18 FPS and usually about 15 FPS which doesn't seem right since on their own I get 45+. Anyone know how to increase the FPS on this merge? (and please don't suggest upgrading hardware) If it's necessary (which I doubt cause it seems like an issue with the merge itself) my specs: Intel i7 940 @ 2.93GHz EVGA GTX 750 Windows 7 64 Pro 6 GBs of RAM

Sorry of this is in the wrong forum guys, but I was unsure whether it should be in the repainters forum or not. Anyway, either way, I hope someon ecan help. For some reaosn, that remains a mystery to me, I am not seeing any repaints of my A2A Cherokee in the aircraft selection window. I follow the normal procedure of adding the repaint folder to the aircraft folder and then the relevent lines into the cfg. but the repaint is not showing!! Any ideas fellas? Thanks...

Been eyeing this for a while... Something extremely sexy about a 5 bladed prop lol! But the asking price is a but much considering it has no navigraph support. I do see a CDU of some sort probably basic. Wondering how the systems are done and if there's even an autopilot? Anyone have any experience with it? What about fps/ performance? Graphically is it as good as their recent PC9 release?

Hi , I am getting up to speed on the Dash ,. Need help with a couple of things. 1st not sure how to adjust the cabin pressure on the Dash8 keep getting cabin pressure warning light after I climb over a certian hieght. 2nd during start up checks we are suppose to check hyd #3 I believe it should be up but mine is shows no pressure not sure what I am missing, thanks for help.

I was on the JustFLight website and noticed a 787 in the Coming Soon section. Just thought I'd let you all know. Personally, I think it looks off, especially the cockpit windows and engines. Hopefully as it is still a work in progress this will be fixed. http://www.justflight.com/product/787-8-download

Hey, so I got the feelthere 737 thing a while back. I recently got the fsdreamteam GSX(ground service x) So I try using it with the 737.... but I can't figure out how to open the doors.... I got the front cargo door and main passenger door, but can't figure out the other cargo door and the service doors. I searched all over google and couldn't find anything. So just thought I'd ask here. Thanks in advance.

The flightdeck main panel,throttle quad and radio panels are light blue. The panel where the 2 fmc are is gray. Anyone else see this and how do I correct it. Paul