MS FSX | FSX-SE Forum

I'm looking for some payware mods that have decent performance on my PC. For example, the payware mods Majestic Dash 8 and Wilco airbuses work great, so I'm just looking for further mods that work like them. I'd prefer a 737 but I cannot seem to locate one. P.S sorry if this is the wrong section.

Hey guys The FASA virtual air racing club had release a very nice freeware T-6 air racing series. http://www.fsxairsports.com/air_racing/classes/t6/FASA_T-6_Racers/ Cheers TJ

Has anybody purchased Xtreme Cities X USA SouthCentral that would care to comment about it?

I have The Majestic Dash -8, with EZDOC Cameras and Accu Feel.I get the sound of the engines while in the cockpit, but when I go outside, no engine sound. There's sound of the engines while outside with all my other aircraft. How can I fix this problem because I love the sound of those engines. Thanks

ok so after i am about to install it the 1722 error comes up. i have tried the Software Licensing System Reset Tool but when i go into the cmd and do the MicrosoftKB928080 / resetsldl -All it says failed to dlete the token store heres a pic - http://prntscr.com/4oneqx please help

Hello All I have a interesting question regarding the FSX Map. Is this a way to bring the FSX Map and waypoints up to date to match something like the skyvector site? and if there is a way it has to be done by someone who is not so computer bright. thanks Ian Snow

Folks I suspect the answer is yes, but would appreciate if someone could confirm. I use FlightAware and Skyvector for most of my flight planning for tube flights. This is fine in the US as the routes are in FlightAware. For Europe, I plot my way around the airways maze, finding SIDs & STARs that connect to airways that are headed the right way. But honestly, I'm making a fairly educated guess at the route and there's a bit of time consuming trial and error involved. And this doesn't take weather into account. Does PFPX do the donkey work for me with this? Cheers Mike

Hi Good People, For those that may not have noticed recently, the Ford Tri-Motor Project Team have been pumping out a bucket of liveries for the Default Microsoft Curtiss Jenny JN4D aircraft. This is a great "low and slow" historical aircraft however, she was lacking somewhat in her texture mappings - typical of the Microsoft default girls. Lots of mirror mapping and some duplication mapping for various components. This unfortunately, like the other default aircraft, restricted the scope in creating some Fact, Fiction and Fun liveries. However, the Ford Project Team has push some boundaries - experimented and pumped out lots of stuff for these almost forgotten …

Hi everyone, I recently got forcewindowedvsync correctly working and performing well, i created the .bat file but my question is, do i have to have aero enabled for this to work? i like the classic look but i feel like this will make the vsync tweak stop working. is that the case? Thank you

Hey guys Im having some problems with my recently installed PMDG 737NGX. The wings are horribly looking and are just a pixely mess. Anyone know how to fix this problem? SPECS: i54690 GTX660 8GB RAM 64 Bit Windows 1TB HDD 6-GB SSD Thanks GUYS! http://imgur.com/t7oFdsq,3dtTs35,LlwdA45#0 http://imgur.com/t7oFdsq,3dtTs35,LlwdA45#1 http://imgur.com/t7oFdsq,3dtTs35,LlwdA45#2

Havn't really touched FSX for what must be near 2 years now due to giving up on crashes/errors/poor performance. Did have one very short session trying out DX10 when the Fixer came out but that was short lived. Bought components last night and should have my new PC up and running within a few days. Specs are: i7 4790k 4.0Ghz Z97X-Gaming 5 mobo. G.skill 8GB 2400Mhz MSI GTX 770 2GB Have a 120GB Samsung 840 evo SSD which i'll be sticking FSX and all addons on. Windows will be installed on my WD velociraptor 300GB. Will also overclock the processor (though it will be my first time). What i'm wondering is what the main addons that are now used for people fly…

Hello All, I'm a little confused as to the best flaps setting for landing this bird. The sample flight tutorial says to land with flaps 15, and this in my opinion is the most stable flaps setting for landing. When I try landing with flaps 35 she becomes very difficult to control, particularly with the speed. In real operations, do pilots land with flaps 15 or 35? Thanks very much, James

Greetings! Is there a tool anyone is aware of that allows us to enable/disable Scenery objects *outside* of FSX? First,a bit of background. When the weather is clear, one of my favorite flights is from KORS (Orcas Island) to KHQM (Bowerman) for the proverbial $100 hamburger. Load the Legacy with 30 gallons of gas, strap in the Wif-Unit, set the altitude for 2500', and up and away we go. I have all the Orbx NA regions, and we all know how nice PNW is for flying around the San Juan Islands. I used to be able to make this flight without incident. However, after purchasing and installing some Orbx airports I get the soft chiming from FSUIPC that signals an impendi…

Actually I am uploading it as I write this message. It is named "texture.ae.zip"I also uploaded an American Airlines for the Posky 747-100 last week.Hope you like it.Leo

Hey. I haven't got Jetway key assigment in simulator key control options. I try to add this manually to Standard.xml in Control in FSX folder in appdata, but not working, what to do? (payware scenery - UK2000, Aerosoft)

Hello everybody, I have installed FSX in my new computer, but for some reason it gives bugs and fps decrease with any external add-on... At first the FPS were between 30 and 60fps, but now seems to be quite different: - with any scenery add-on + custom aircraft (like PMDG 737NGX, Aerosoft A320 Ext.): between 3fps and 10fps - With any scenery add-on + default aircraft: between 10 and 20fps with lacks btween 1 and 5 fps - No performance impact received with high/medium/low settings - DTX10 seems to improve the fps by 5 to 10 fps but doesn't help very much - FSX.cfg tweaked for performance does not improve and makes worse I'm having and almost 1 week old …

Hi I have tried all settings in NI Inspector, read all stickys about Antialiasing and FSX! My problem: Yes Aliasing is working, and yes no more shimmering with sparse grind SS! A small performance hit, yes but i can live with it! For what i can NOT live with it because of blurried gauges and texts with such high Antialiasing settings! Makes me blind! DX10 is not an option for me but i know Aliasing works much better with it! Is there any solution out there to solve the blurries in the cockpit with such high AA Settings? Thx Max

hey guys wonder if anyone can help me when i done a fresh install of the citation x 2.0 for some reason my pfd nav display and eicas are all blank iv gone thorugh the correct procedures to power up the displays even tampered with the brightness but its like a gauge is not loaded or something as iv got all black displays. Paul

I am re-installing The Magestic Dash -8. ( a boxed Version ) for FSX. I use My key and name, then it says to go online for a connection, so I do , but get a pop up that says ; Cannot Connect to Server. I tried going on their forum but can't because they require an invitation code, but there is no explanation of what or where that is. PLease help, thanks

FSX Native 3D Support Thread for users of the FSX Native 3D Utility ===================================================== In process of uploading. ....... More action here soon.

i had to uninstall fsx because it was messed up but when i install it two errors come up Data error (cyclic redundancy check) and Error -1603 fatal error during installation. Please Help

Just discovered this website with an really amazing rendition of the airport so Valencia in Spain. I think you can give it a try.Here is the link: http://www.ake-airlines.es/akesoft/LEVC-X/

Hello, I recently downloaded this awesome aircraft but am unable to even start the APU! I was following the manual and it just seems the VC is dead. I can flick switches, also my joystick works with the aircraft but that's already all about it. Is there something I'm missing???

Good day to all, I have noticed that my local HD is getting almost full as I have my FS9 and FSX installed on my C drive. I am looking to buy a new external HD and connected to my PC and wanted to move my FS folders to the external drive. Can you please advise what are the steps to take before or after the move so I don't get problem when flying. Now my set up is C:\FS9 and C:\FSX. Lots of add-ons are also installed. Any help would be much appreciated. Regards

i am running FSX SP2 i installed this panel on the ANZ Posky 777-300ER (the all black scheme) and i noticed that one the EICAS the Hydraulic C caution shows up, i look at the switches on the overhead panel and the swtiches all have fault and the demand switches have fault marked underneath i try to press the buttons and the switches and the fault doesnt go away how do i fix this?