MS FSX | FSX-SE Forum

How does one find TEC Routes using the Digital AFD??

Hi all, Yesterday I noticed an issue over Zurich airport area. When I fly over it or near by, like on approach, I noticed my sim will freeze every 15 sec, and will freeze for about 10sec. I have Aerosoft Mega Zurich airport, I have also deactivated the scenery, jut to test, and the freez still remain. I have tested other area in the sim, and it seems only arround Zurich. Any idea how can I resolve this issue. Thanks

Hello I would appreciate any help and/or advice that anyone would be able to offer please. I have FSX Acc and Win7 and purchased 3D Lights Redux, naively thinking that the lights would miraculously install in my add-on aircraft! Clearly that is not the case and a lot of work is clearly needed to install in each aircraft's .cfg. I have read Scott's 'Easy how to guide' in the A2A Forum over and over, but when I look at each aircraft's .cfg, the [LIGHTS] section never resembles anything like his example, and despite my best endeavors, I am lost! Is there a good source of configs for recent aircraft stored anywhere by others with bigger brains than mine please? In my…

Has anyone tried the Just Flight F-117A in FSX-SE or P3D v 3 yet, will it work ?

Aerosoft Mega Airport Rome Fiumicino released! compatible with FSX, FSX-SE, P3D V2-3. http://en.shop.aerosoft.com/eshop.php?action=article_detail&s_supplier_aid=12801&s_design=DEFAULT&shopfilter_category=Flight%20Simulation&s_language=english

Looking for a complex full featured airliner and cannot decide between PMDG 777 or the Aerosoft Airbus bundle. One question for those that have the Aerosoft series does it have auto throttle like Boeing?

I purchased it a few days ago, and do very much recommend this product for supplying VECTOR data to your Canadian landscape. Much more data than was in UTX Canada v1.0, and some nice new bridges that finally do cross over all your Canadian road/water/canyon road interruptions, etc. If you have already Canada v1.0...be sure to download the 33 % savings coupon before you download the product, so you can apply it (along with your Canada v1.0 purchase order number )---(you need that during the coupon segment) and there you have it. It works very nicely with ORBX OpenLC Canada and Alaska. Nova Scotia looks great, of where I choose to do a lot of flying. I hav…

Hi all, So last night I fired up FSX as usual and encountered a really strange bug/issue presumably with EZDOK. Under normal operations I press and hold my middle mouse button to pan around the cockpit. At the same time the mouse cursor disappears but immediately reappears when I release the middle mouse button. Last night for some bizarre reason when I pressed the MM button, the cursor disappeared (as usual) I could pan around the cockpit but when I released the button the mouse cursor didn't reappear! This means I can't actually click on anything in the cockpit. The mouse is still working however, if I press the MM button I hear the audible "click" and I can s…

Hi All, Recently I decided to do a fresh install of my flight sims on an SSD, and I wanted to test out both FSX "Classic/boxed" and FSX Steam Edition. Now even though I read that base folders are different, and that registry keys and support folders will also be different if the FSX:SE Install detects that you already have FSX Classic installed, and that these folders are well known, and that there's even a registry key that TELLS YOU that you have a dual install, it seems like the first product I was going to install, which is ORBX FTX Global has an issue with this and will simply not work... So my question would be: is this the same for all/the rest/most add…

Hi guys, I am still dumbfounded as to what to do with this. I had FSRT installed on W7 64-Bit and it worked great. I have since upgraded to W 10 leaving all installations as is. Everything works except FSRT. I get error 339. It says COMCTL32.OCX or one of its de- pendencies is missing or not correctly registered. I have since; 1. Uninstalled (with registry remover as well) and reinstalled. Last one is 1.97.11 2. Re registering all OCX files mentioned in the irunin.dat file 3. Re installing Microsoft Visual Basic 6.0 (which is now the new Common Control 5.0 I believe) Running in various compatibility modes icluding letting Windows 10 try to solve with…

Hi everybody I post to introduce myself, a new scenery designer and its first addon ! Destination French Riviera !!! Cannes Mandelieu, LFMD, located 5km (3 miles)from Cannes, on the French Riviera, is the 2nd most important general aviation airport in France (more than 70,000 flight movements in 2014) it receive : - Business aviation. - tourist aviation. - emergency, forest surveillance and fire-fighting missions. - teaching and training in the airline business. To create LFMD for FSX, everything has been implemented to represent with the greatest fidelity this dynamic platform, try as much as possible to transcribe his life, dynamism and its atmosphere. Mainly:…

Hello I am looking to buy some replacement ground textures for my 2nd pc which is running FSX SE, on my main flight rig I use ORBX global and "full fat" regions but I think I am right that if I wanted to install onto my 2nd machine that i would have to buy another copy which could end up quite expensive. Does anyone have any other recommendations on replacement ground textures which would be at a resonable price. many thanks Darran

1.) Is it possible to merge the posky CRJ2 (as well as the CRJ9) with the default CRJ7 Virtual Cockpit? 2.) Is anyone aware of an updated US Airways Express livery for the CRJ2? The only Posky one that I've found available is the old America West livery.

When taxing, taking off, and in normal flight, I notice that the interior cockpit panels drift left, right, forward and back. It requires constant adjustments throughout the flight to get the panels back to the desired position. I guess this is an FSX characteristic. Do any of you know of something that actually works to stop or at least minimize this? Thanks.

Does anyone still use it. I dug it out recently and it stands up pretty well concidering how A2A has changed all the rules! I was taken by this German registered 1974 vintage aircraft: So I did a paint for it: It's on AVSIM awaiting take off clearance.

I know that there's already a compatibility thread already on the forum. However, most add-ons seem to work (to a greater or lesser extent) and the thread is now many pages long mainly of successes. I'm trying FSX-SE on my laptop and it's working reasonably well and I'm more interested in what currently doesn't work. So please can we have a list of specifically what doesn't work - hopefully a much shorter and more manageable list. Please stick to facts rather than rumours!

Just remembered this was in production after not seeing any updates for a while. Does anyone know the status of the Wilco Falcon 7x or have any new information of its release. It seems to have gone quiet in the Wilco camp. Cheers

Hello I posted this in the P3D forum , but should probably have come straight here. Is it possible to use the TrackHatClip Pro with Opus (in P3D V3) instead of TrackIR? Thanks erich

I have been trying to fly with OpusFSI all day, and the program goes into "demo" mode as soon as P3D v2.5 is started. When I try to access the web site at http://www.opussoftware.co.uk/ I get an error "Unable to access the Network - access denied". Anybody else having this problem. I am running OpusFSI 4.6. Thanks!

Last few flights I have starnge problem. For example on my last flight from UUDD to LTBA (Istanbul Ataturk) I requested vectors for 36L runway via Pro Flight Emulator, and in NGX FMC I could choose 35L. And on top of all ILS signal was completely off, airplane crossed the feather, and I had audible warning eather from PFE or FS2CREW - "localizer deviation!". Two or three times that warning repeated, before I had to switch off AP and do manual approach to 36L. Never had problem with localizer deviation neither heard that warning. Now I'm confused what is causing this problem? I've just checked in ADE updated AFCAD version of LTBA from the AVSIM library that I used in t…

Hi I am considering getting the Cherry keyboard G86-63400EUADAA at http://www.megabuy.com.au/cherry-g86-63400euadaa-spos-keyboard-with-142-programmable-keys-to-3-levels-relegendable-black-p28939.html. I know it's not cheap but it has 142 programmable keys using the Cherry software. I intend using it with EZCamViews which allows you to create custom VC camera views (soon to include outside views) and also using the Cherry software to bring up all my different gauges using the shift key, plus other items eg landing gear etc. Any comments would be greatly appreciated before I lay down my hard earned. Thanks John

Hi! Love this plane! Even sprung for the Fs2Crew for it (which is a challenge in of itself!). However, I notice that I could set a setting of passengers and cargo in the control panel, and have the ZFW come out to, say, 53000 lbs. However, when I enter the same settings in the FMC (# of passengers, cargo weights, etc), it comes out as a different ZFW- say, 51000 lbs. What am I doing wrong? I know I am entering in the data correctly, or at least I THINK I am! help would be appreciated. Thanks!

While I'm in a flight about every minute or so a black screen will flash for a split second with a pop up that reads loading scenry. It's a real distraction and am wondering how to get ride of it. I have all my drivers updated. Thanks

Seems at add on airports I see the add on control tower and near it I see the default tower as well. I think I may have messed something up installing a freeware airport in the past. Can any one suggest how to repair this ?

I'm currently torn between Gary's UK2000 airfields with their nice attention to detail and plenty of parking for AI traffic and the native Orbx airfields, which blend seamlessly with Orbx England and include nice features like 3D looking grass and quality static planes. The Orbx fields don't quite seem as accurate, or seem to have much AI parking provision though, and my home strip, Beverley EGNY, has none at all, while Gary's EGNY has 4 slots. An airfield like Oxford is another good comparison, with Orbx having half as many parking spots as UK2000. In Orbx's favour is the colour match. UK2000 is washed out and designed to match the VFR Photoscenery I used to run. It…