Microsoft Flight Simulator (2020/2024)

Hello guys, is there any AFCAD fille for Gaya's LOWW where all parking gates are available. I use the static remove file from flightsim.to but the parking spots where static aircrafts where not available to spawn. Thanks!

Just started MSFS and was confronted with a 1.32 gig update to complete. Im very much up to date, anyone getting the same? I'm not and never have been involved with Beta. Regards Brian BJ from Oz

I have installed the driver off honeycomb site and still cannot get the lights to work on the Honeycomb throttle and what is so weird, they always worked but not now. Any suggestions?

I am a newb as far as MSFS is concerned. Yesterday I started a flight and let MSFS pilot do the flying on a trip from KSBA to Chino. About half way through the flight I had to attend to other business so I paused MSFS. I was away from my PC for some time. When I returned the sim was still paused but it was dark outside. It appears that whilst the sim was paused the time of day marched on. Can anyone advise me on how to pause both the sim and time or is it a bug of MSFS?

Our community took a direct hit from hurricane Ian. My boat showed a wind speed of 95-mph before the anemometer blew off the masthead. The local airport (KPGD) reported 139 mph steady one-minute wind readings before their instrument blew away. Comcast/XFINITY went offline Wednesday afternoon, September 28. Our electrical connection was down until late on Saturday October 1, and our water connection did not come back until Tuesday October 4. Our pool cage blew down, our boat was damaged, the food in the fridge and freezer spoiled, and a large commercial roof blew into our front yard from a 1/2 mile away - none of which was as annoying as not being able to fly in my…

Hi, I would like to ask fellow simmers if they are seeing any Manathan buildings during ILS approach 22 at KLGA. I can’t see any apart one which must be a POI therefore appearing well before the others. I can see the buildings when on the ground though because I guess I entered the radius in short final maybe. I am running TLOD 100 with no photogrammetry. I would be glad if you let me know your experience at KLGA regarding this. Pierre in the radius

MKStudios and RDPresets have both released their rendition of the Girona (Spain) airport... at the same day. Now that's a first in flight sim. Also pretty strange it happens with Girona, an small airport with max. 2 millions passengers that is almost exlusively used by Ryanair. MKStudios: https://secure.simmarket.com/mk-studios-girona-msfs-(de_17107).phtml (or via Orbx) RDPresets: https://secure.simmarket.com/rdpresets-lege-girona-costa-brava-airport-msfs-(de_17111).phtml

Hi everybody, i bought the Fenix A320 some days ago but have some problems understanding the ECAM data and messages. You can see an example ECAM here: (Please ignore the ECAM messages, the picture ist just for showcasing the two questions below) 1. The flaps indicator is always orange coloured even though the flaps are fully retracted. I couldnt find any information regarding this information. When does it turn green like or what is wrong so its orange here? 2. I am starting out of Cold & Dark state. But from the beginning on there is green data about N1 etc. available. In tutorials videos there are orange lines like there is no data availabl…

Look here:

REX launched an update Sep 23rd that should be compatible with SU10. ... PRODUCT INFORMATION: REX Weather Force - Technical Update 4.5 - Released DATE ISSUED: Friday, September 23, 2022 PRODUCT: REX Weather Force for MSFS 2020 BUILD: 6.0.2022.0921 (Corrected build number) BUILD STATUS: Released WARNING: This is a full version of REX Weather Force for MSFS 2020. Therefore, uninstall all previous versions of REX Weather Force for MSFS 2020 before installing the latest update. FIX LIST: - FIXED - Compatibility with the latest version of Microsoft Flight Simulator - FIXED - Temperature rendering within the aircraft -…

For those currently flying- is the server migration complete? More importantly, do you notice any improvements? I received data warnings often, despite a fast internet connection locally. I’m hoping this improves…. Fingers x’ed! Ta- C

https://flightsim.to/file/40862/boeing-747-sca

I’m interested in the pros/cons of the Kodiak vs the Caravan EX. On one hand, it sounds like the Kodiak is a study level aircraft… but it also sounds like a real chore to trim/fly. On the other hand, the Caravan with mods is less sophisticated, but potentially less frustrating as a sight-seeing plane. I like realism, but I don’t want to be frustrated or so preoccupied with aviating that I don’t have a chance to enjoy the scenery. Thoughts on pros/cons for both of these for VFR sight-seeing duty? Note that cost is not so much a factor, but if it’s clear the Kodiak is not a good choice, I’d rather put the money into something else.

https://www.guru3d.com/articles_pages/geforce_rtx_4090_founder_edition_review,21.html The real power of DLSS 3 can be seen in Microsoft Flight Simulator. Whereas DLSS 2 could not improve upon CPU-bound games in any meaningful way, the key component of the new version of DLSS 3, Frame Generation, is completely independent of any CPU bottleneck. As such, there is a massive 106% increase in average FPS and an even greater 115% improvement in minimum FPS over the DLSS 2 implementation.

Maybe I missed it but has anyone tried these two: simMarket: RV-8 - MSFS simMarket: KITFOX SPEEDSTER SERIES 7 MSFS

Since the latest update i get this error during loading when Thrustmasters TARGET Script is running. It runs just fine, showing Thrustmaster Combined in the compiler but then all of a sudden: Error:One of the selected USB devices (0) has been unplugged. Aborting script! This results in 2 separate Warthog controllers instead of one combined and then makes the controllers useless in MSFS. Only option is restart and hope for the best. I have been looking through the internet to find a solution because my first thought was a USB or controller hardware problem. Most of the solutions found point to the USB power management letting the device go to sleep but …

My cousin and I both have and own the Freedom Kit Fox. We selected out departure airport (KOXC) different parking locations. And he was seeing me in a low wing aircraft and "Not" the Kit Fox. I saw him in the Kit Fox though. Any idea why this would happen? Thanks Walt

I think I read that if an add-on scenery removes marshallers (or whatever you call those guys that guide you to a parking spot)., it removes them from all airports. Anyway I haven't seen any lately. Are they still around? I'm not sure how realistic this is for some GA planes, but I've flown into airports that do have them. Is there a way to get them back, or am I just not looking in the right place. I tried turning on taxi assistance and it took me to a parking spot but no marshaller.

I just want to know, if each time I have to start the Fenix Airbus in cold and dark state, that I must turning on the lights on PFD and ECAM. The reason, I can't see the Self Test in all instruments (like ECAM.... etc) For example, In Toliss Airbus, I can start the simulation in Cold and Dark within the instrument light on (PFD, ECAM... etc) Is it possible to do that. Thanks for any aswer.

Got an email just then 20% discount if you bought the Caravan! https://www.justflight.com/product/steam-gauge-overhaul-analog-king-air

American Falls, ID Freeware Available Soon with Custom Rendered Main Bldn As I was developing the Utah Enhanced addon, I realized there were a LOT of "failed AI" and blank airports in southern Idaho. I will be filling in a few of these airports which are unlikely to ever get fully developed due to them not being in popular spots. Pocatello and the larger airports are not going to be included because too big of a job, I am mostly filling in the smaller to medium sized ones. I have not yet picked the 2nd airport, as I also have to finish my Missoula payware, but American Falls will be ready by this weekend or SOONER. This will be done over time, t…

Hello everyone! Like many of you, I have problems with the A320 fenix. For the Airbus TCA Quadran from Thustmaster The hardware and sofware quadran are not in phase. For the moment I use the default key association The only two things that are problematic : - the flap lever does not move at all -the left and right throttles. When they are in IDLE on the hardware, they are not in IDLE in the simulation. I know that there is a calibration to be done by the FMC but it only works if, before that, the hardware position = the software position. I have read many possible solutions. -Let the configuration operator of MS2020 or SPAD.NEX? …

Help. I did something with the settings and my toolbar changed. How to fix it?

Hi all, iniBuilds' LAX is due to release later today. Here's my review of it 🙂 https://youtu.be/_LL3LSr8-Ic