Pilot2ATC Users Forum

As I fly in to Chicago a storm has entered in my path - how can I request vectors to avoid weather?

Is it possible to control the program using the keyboard ??? I do not want to use the mouse or voice.

After many tries and failures with P2A, more than likely my fault, I have finally had a nearly successful flight. My question is about the differences in the altitudes in the plan versus what ATC assigned me. I received a descend to 5000 but the plan showed 12000 and I never received any instructions for transitioning to the ILS altitude of 2000. I assume it is something I did but not sure what. Lastly even though the plan showed the ILS24 approach the nav did not assign the correct frequency. I use navigraph and my data is current. Thanks in advance for suggestions.

Hi all, I don't know what im missing on every time I fly FF757-200 with pilot2atc don't work.. atc is connected and freq. is set correctly, when start to talk to atc there's no respond except I can hear transmit tone that I set.. there is no problem with other aircraft just only the 757-200 , do I have to do some setting in the radio in 757-200 ? sorry for poor English.. big thanks..!

Using with XP-11. Is there an easy way to tell if I've already imported the taxi ways/parking for any particular airport?

Hello, I'm getting the error below when I try to play a Cereproc voice in P2A. In the past I could play them but I could not mix them with Ivona voices. I updated my Cereproc voices to version 5.01 and in the Speech Recognition Text to Speech dialog I can play Cereproc and Ivona just fine. Rob

What is a "transition" as stated in an IFR flight plan. I followed the plan under ATC until "resume own navigation". I continued on following fix points, headings, altitudes as previously assigned but was no longer "in the system". I landed (illegally) without any further input from ATC. Was my failure to follow "the MSN transition" cause for being "dumped"?

X-plane alone runs smoothly and fine, when I try to use pilot2atc it always crashes out of memory. Ideas?

Hello,Since the update 2.6, I can't to assign a door to an airline.Did anyone else notice this problem? Regards. Vincent

I am using P3dv4 and I have P2A checked provide ATIS but both the sim ATIS and P2A ATIS play at the same time when the ATIS frequency is set. what am I doing wrong? thanks

Hello everyone, I have been using Pilot2ATC for several months: no problem. Today, I bought X-ATC-Chatter I installed (Europe only) with Pilot2ATC: Flight: LFML / LFBO - The X-plane 11 contact & Pilot2ATC established, I had the messages of X-ATC-Chatter but from the taxi phase no more messages from X-ATC-Chatter. However, Pilot2ATC worked to the destination (LFBO). Is this normal? If it's not normal for you to help me please. Thanks in advance.

hi , I been using pilot2atc x plane 11 around a year , best atc in the market cannot fly without it ,my last flight this morning the atc is still normal..suddenly this evening it seems not to hear my talking, no respond , I tried many times with different aircraft, the programme seem to be normal, power green , sim connected flight plan imported, push to talk the PPT light green and everything as usual but I just cannot communicate with atc, I even reinstall the programme pls help .. SOS from the far east..thanks in advance

Hello! I just bought pilot2atc and I`m already loving it. However I think I have a problem related to it. My airport was ok with the gates and after I installed pilot2atc the plane is located as in the image when I start the flight at the gates. Before using pilot2atc, and following captain-K recommendations on video, I made the taxi maintenaince and asked it to upload gates and taxiways. I think this might be the problem, because look at how the gates were uploaded at the left terminal (second image). But even bly clicking and dragging the blue markets to regular positions, the plane is still loaded in this odd position. Thanks in advance for the help …

I have 8gb. I know that Dave recommended 16GB minimum. I just can't afford it. For now. So i want to ask you, Dave, to help me with optimization of this program. Which windows i can hide or which options i can "uncheck" to get better perfomance? Now i'm suffering from freezes. Loading - 3-4 minutes. Connecting - 3-4 minutes. Import plan with just two points(dep and arr) takes 3-4 minutes(disable calculating safe enrouts helps here). File plan - another 4 minutes. But this is ok. I can wait. But i can't wait, when app "not responding" for 3 minutes before ATC give me answer for my request. But the most suffering thing is moments when app working fine but just don't pr…

I want to download version 2.6 but I get HTTP Error 404. The requested resource is not found.

Hello, I receive an error message when loading the new version, log contents is copied below : Program StartedPilot 2 ATC (P2A) - version 2.6.0.0_x64_R2 05/20/2019 13:41:39 Error in FlightDate Init System.Data.Entity.Core.MetadataException: Schema specified is not valid. Errors: The relationship 'P2ADataModel.FK_AirportSID' was not loaded because the type 'P2ADataModel.SID' is not available. The relationship 'P2ADataModel.FK_APPRTransitionTERP_Leg' was not loaded because the type 'P2ADataModel.TERP_Leg' is not available. The following information may be useful in resolving the previous error: The required property 'SID' does not exist on the type 'P2A_2…

Solved.

Hi, I'm using P2ATC every flight, but I'm not using the microphone for commands. I just choose it from the droplist and then click "Say It" with the mouse. But with the latest version, there is a new feature "Load". It makes me have to do one more click on Load for my command to work. So is it possible to bypass or remove the "Load" feature?

Hello, I am having a problem since updating to P2A 26 R2. The problem may have existed initial release but I am not sure. I flew 2 flights from CYYZ to KORD. Both flights used the Sid GOPOP3 and STAR to KORD of STASH. That chatter files stopped working while using Cleveland Center before I got to GOPOP. The first run stopped further along the trip. On the 2nd run it started working when I hit the sayit button and switched to ground. I got the chatter back at that point. I have been using ATC Chatter in the controller directory since the beginning. It appears to be getting knock out by something. Both flight were with FlightFactor A320 10.3 Beta. I would s…

Hello, There is something wrong with my installation. I can't see any choices for answers or any possible commands no matter which freq I'm connected to. I can answer as ATC as usual (using voice) but I cannot see the options. Basically there is no grammar. Any ideas? Best regards

Hello Dave, email sent to admin. . . re above problem. I have my key and other details if needed. Very many thanks, Bruce

Hi, I was wondering how the "Import of AddOn Airports from MakeRwys output from P3D" function works in the new 2600 version? I couldn't find reference to this feature in the new nanual. Thanks, Peter

I know it already has been said more than once... probably more then hundred times from different users... but anyway... What I was hoping for, since a long time, was the implementation of an AI control module. When playing with AI on, I'm getting run over permanently what ruins it for me totally. Sure, one would say, turn the collision detection off. But there's a problem... I use AirHauler 2 (or FSP back then on FSX). So I need the collision detection and to be honest... Seing another plane going through my aircraft - even if it doesn't hurt me with collision off - is so annoying! And it happens waaaaay to often. I'm aware, that it's problematic to control the AI i…

Hi guys Just wondering if there is a VFR tutorial floating around. I usually fly in the Aussie countyside, usually between 2 uncontrolled airports. I tried the demo a while back but got frustrated as I was unsure what frequency to use. There would be a couple listed eg centre, and I would talk on them but I got no response. I know I am being a bit general, but I was just wondering if there is a simple tutorial I could use. Thanks. John

I am a little confused about how to get a flight plan created in P2A loaded into an airplane. I have a Vertx Diamond DA62 with a G1000, and I am unable to load a flight plan from P2A into it. It seems to me that sometimes just filing a flight plan loads it into an aircraft, but this doesn't work apparently with the DA62. So I have exported the flight plan from P2A into a PLN file, but when I load that with the P3D4 flight planner, all I get is a direct route from the departure to the destination airports. All of the waypoints, including the SID, STAR, approach and intermediate waypoints seem to be stripped from the plan. How can I get the complete plan loaded in…