PMDG 737NGX | 737NGXu

Am I right in thinking that AOA media is dead?

Hi there, I have huge problems with the 737 when it comes to the VAS usage. For example with the same settings I have around 2800mb up to 3100mb in the Aerosoft Airbus or in the Majestic Dash 8 Pro. In the PMDG 737 I can't complete a single flight. I use the latest Version of P3D V3 (3.4) on a Win10 Enterprise 64bit with a GTX1070, i7 6700k, 16GB Ram. Add Ons in use are: ORBX Global + ORBX OpenLC NA + TreesHD. The 737 also the latest Version. I only ativate the airports which I am flying too. Mostly FSDT,Flightbeam and Taxi2Gate. If anyone knows how I can get my VAS down, it would be really awesome if you could help me! Thanks in advance!

Looks like it's completed. Would be cool if PMDG would add it to the fleet and also if some people would do some liveries since they are no longer fictional Pawel Grochowski

I know that the weather radar for the NGX requires Active Sky Next to work. I'm now wondering does it also work with the AS16 out of the box?

Just because i am a little bored now that i have completed everything that FS2CREW has to offer( and you really should extend your flight with this if you have the NGX BTW) i was wondering a little about the yellow zone in the cabin pressure system. I often have the needle in this because i fligh high (above FL380) but do it really matter at all ? (also in respect to real life off cause) Thanks Michael Moe

Since the last update my TCAS has been turning off by itself. I'll turn it on, do some more cockpit checks, and then notice that it is off. Sometimes it happens two or three times. I've downloaded the lasted update just to make sure I'm current and it looks like I am so any help appreciated. Thanks.

I am in need of information on a continuing problem with the PMDG 737 autopilot for some time now. First of all, it doesn’t happen on every flight and it doesn’t happen in all takeoffs and approaches. It only happens during my takeoff from (KSFO) San Francisco International to (KSNS) Salinas Airport. I program the FMC no different than I do for any of the other flights from and to other airports. When taking off and reaching over 500 feet the autopilot will NOT engage. It won’t engage until it reaches 7000 feet or above and past three waypoints from the airport. Upon approach to Salinas the autopilot uses only one channel and will NOT engage Command B even…

I have just purchased the PMDG 737 NGX for FSX. I have downloaded it (twice) and it will not unzip. I have tried Winzip and 7-Zip and both report an error with the file. Does anyone know what the problem is?

Dear all, Is PMDG Boeing 737 able to simulate Short Period Oscillation? Short Period Oscillation "With no special name, the shorter period mode is called simply the "short-period mode". The short-period mode is a usually heavily damped oscillation with a period of only a few seconds. The motion is a rapid pitching of the aircraft about the center of gravity. The period is so short that the speed does not have time to change, so the oscillation is essentially an angle-of-attack variation. The time to damp the amplitude to one-half of its value is usually on the order of 1 second. Ability to quickly self damp when the stick is briefly displaced is one of the many crit…

Hi Dear Guys, I know there have been discussions on this topic, but the answers are so diverse that I cannot figure out a solution. In short: this misterious click spot "disease" reached my setup. After hundreds and hundreds of successful flight hours on my NGX and after a short break in usage (due to my rw aviation activity) I wanted to fly her again. And to my bad surprise I found that some clickspots are not working. Mainly on the MCP panel! Some are OK, like the ones on the FMC CDU and on the pedestal. I have EZDOK installed, I tried to disable it without joy. I even reinstalled my NGX (together with Simconnect) : no improvment. So, I am simply unable to fly…

Hi, Why when autopilot is switched on both CWS yellow signs light up on PFD and yellow autopilot button is blinking? Tom Link

I am having no success getting functionality from the N1 switch on the MCP. In particular, with a V1 engine failure I climb to my engine out acceleration altitude, I'm still in the takeoff mode i.e. with takeoff power. The profile is to bug the speed up to zero flap maneuver speed, select FLCH or VNAV after the flaps are retracted, then select continuous thrust (CON) for your climb by pressing the N1 switch supposedly. I have had no success programing the N1 switch on the MCP and I know what I'm doing there; I have all the throttle quadrant and yoke switches programed and they work fine on my CH products. NO matter what I do or what keyboard combo I choose that N1 switc…

Hi together, I've got a strange spoiler problem. Some time ago the spoilers of the 737 and also of the 777 started to extend all the time to about 1/4 of the maximum. The lever moves there some minutes after loading the aircraft and is staggering in the 1/4 position, as if the were 2 conflicting control inputs. However physically there is none: It also happens if I remove all joysticks and control hardware from the computer. And it only happens to PMDG aircraft. All spoilers of other aircraft work fine. It happens in every phase on the ground and in flight. I can retract them for a moment by assigning a key to "retract spoilers" in the right FMC. But a few seconds la…

Hi to all fliers of PMDG, PMDG Staff, and anyone else who knows anyuthing about this program. First of all, due to lack of funds, I purchased a PMDG 737 NGX from a seller at Muttley's Hanger - he used to have FSX but recently went over to P3D and so he has no further use for the program. Having bought the program from him, I read to my horror in the EULA that persons who have previously bought a PMDG program are not allowed to sell it onwards without the express permission of PMDG (how they get in touch with them, heaven alone knows!) The same condition, I read, applies to a buyer because you need an Authentication Number, presumably given to the first buyer when he…

save me diving into the FCOM. Can anyone tell me what the O/C button on the MCP is for? TIA

Link here: http://komonews.com/news/local/alaska-airlines-unveils-plane-honoring-veterans Alaska unveiled this beauty and i cant repaint for the life of me. I was wondering if anyone could do this for the 900WL. I know it has winglets on the bottom, but the top can still be painted. It would mean a lot. Thanks. Mike B.

Hello all, I need a white livery for the 737-800. anybody have one?

Hallo, I've just bought the pmdg 737 ngx base package and i'd like to download the sp1d. Is the download i've just made the 1d version yet ? If not, what do i have to do to download the sp1d ? i tried to click "Click Here to log-in" in the service updates page of the 737 800/900 base package sp1d and this bring me in my account menu, tried all of the link without find any "sp1d" download link. Any suggest ? Thank you in advance, Massimiliano Nati.

Warning The Pmgd product was unable to create work files .. Please make sure you are running FSX as adminstrator Arturo Holguin

I have a new computer and a new install of the 737 800/900 with the 600 expansion but my virtual cockpit has all blank guages and nothing works .Also when I go to outside spot I get just a skeleton of the aircraft .Any help on this woul be greatly appreciated .Thank You [.rogerd]

Hi On all of my flights that I have saved flying the PMDG737ngx when I start the flight the engines are running,then engines cut out,the only way I can keep engines running is when I move my MIX control ahead on my CH yoke,then everything works good again. If I move mix control back engines cut out.anyone have an idea what is wrong or what I can do. it was running good since I had it 3 years thanks Vergil Marquardt

owner of several PMDG planes , simmer 15yrs plus just started having issues with the sounds in the planes ( 737's, 777,4100) when I do the start ups in the top panels . Can not hear the clicks when hitting buttons , no sound when APU/ ENGINE / FLAPS starts ? have tried everything in FLT SIM X per sound , speakers work on computer and other plane functions have uninstalled FLT SIM X 2x's just bought the CH PRO ECLIPSE 's yoke and having prob's getting the mixture and propeller levers to work ... Throttles work , have tried to read that mannuel but just get more confuses hope one of U pros can help me ............gotta be something simple thanks Phil duckdong60@h…

Hi all, I'm trying to configure the reverse thrust for my TQ, using PMDG SDk. I found that the right code to use is 680 for the rev1 and 681 for rev2. As values I used the mouse_flag_leftsingle and leftrelease and they move up, but i vannot suceed in moving up to the end. I mean that in virtual cockpit I have to keep left mouse button pressed for some seconds but using SDK i can only press one time. Which mouse parameter I have to use to move the lever up to the end of the course? Kind regards, Marco

Recently purchased ProATC/X and to prevent P3D's default ATC also blabbing off in the background, the suggestion has been to turn Voice off or slide the volume all the way down in the Settings menu. Does this affect any of the "voice" callouts in the NGX? Last night I did not notice the callouts after having switched Voice off.

Is there a way to set the nav radios in the .cfg files? I want to set the default frequencies so the Freq I want come up everytime I start fsx thank you