PMDG 737NGX | 737NGXu

After a few months without touching the 737NGX I try twice to make an LPPR-LEBL flight when I'm approaching LEBL and I'm going to tinker with the FMC to insert the track and the remaining FSX Crash procedures Someone tells me what it might be. USE: FSX BOX ORBX Global FSCrew ' REX4 AS2016

In VR almost as soon as I start a flight in her I get an OOM. Tonight I set my resolution to 1920x1080 with texture at 1024 from 4096, and when the 737 loaded it said in a green bar aircraft cache successfully loaded, or something like that, but it did not do the loading of systems, and nothing was animated in the VC, and in the outside view 90% of the skins were missing, although the gear raised and lowered. Of course as a RL student pilot before injuring my C-spine I was taught to fly by the seat of my pants, and having hundreds of hours flying the 737 that way, all hands on, it was no problem to fly with zero instruments and bring her home for a…

Hello, I've had the NGX for a while now and this is the first issue I've ever had. I am currently running it on FSX: Steam Edition and the issue is whenever I'm in the virtual cockpit looking forward I cant hear engine noise even when at full throttle. However when I look backward at the headrest, down at the floor, or any other direction that isn't forward I can hear the engine noise loud and clear. This just started happening recently and I'm not sure why it started happening, I tried re downloading it from the website and installing it but that did not change or fix anything. If anyone can help me out that would be great. Thanks Branden Jackson

Hi Just bought new windows 10 computer and reinstalled the 737.. Everything fine but theres only 1 decimal point in the nav tune frequency so I cant tune to say 109.75. Am I missing something? Thughts appreciated John

Hi Guys, Is there any chance of a release of an update to have a Scimitar Winglets version with all the little tweaks and improvements? Would happiiy pay for such an addon. Thanks

So, I've just bought FSX:SE after my graphics going again in FSX after loading a program and am in the process of installing all of my current add-ons into FSX:SE. Gone to the Ops Centre to re-install the PMDG stuff and it says to do so, go onto the website and download an FSX:SE enabled installer. Logged in and download my installers (737, 747 and 777) but it gives me the option to repair or remove - neither of which I want to do. I've only one installer in each invoice so I'm not sure where to get the FSX:SE installers from... Does anybody have any ideas? Many thanks, Craig

Hi there, I am running prepar3d with the PMDG add-on for 737-800. The tanks are always full and I cannot adjust the fuel amount in the tanks. If I insert "0" or any other value in the fuel menu, the amount is readjusted, but if I return to flying, I still have full tanks... Any help is highly appreciated! Greetings Berni

Hello! (again) I've just tried to start the 737NGX, by turning the battery on. As soon as I turn on the battery (from cold and dark), it starts making low power alarms. Help! NOTE: The STANDBY POWER guard is closed and the STANDBY POWER switch is set to auto. Signed, Jacob Passam

Hey! I've recently been having some issues with the PMDG 737NGX. Whenever I start my aircraft up, I do this: Battery > APU (whole procedure) > IRS Align -- I may have missed some things out, but that's basically what I do. Now, when my PFD, ND and EICAS come on, it shows this: Spoiler Link: As you can see, there is no numbers on the PFD, ND or EICAS. I need help! Signed, Jacob Passam

Lately, I have been experiencing an issue where I set a target altitude into the MCP of 9,000 feet, for example, and somewhere around 5,000 feet it stops climbing. Pressing VNAV numerous times to force the A/C to start climbing again fails. However, pressing LVL Chg and setting V/S to whatever FPS setting, then the A/C will still climbing again. Any idea what is causing this? Bill Clark

Hello, I purchased the boxed product of the PMDG 737-800/900 NGX Base Package (v1.00.3219) from Aerosoft directly. I now want to download Service Pack 1d and install it into FSX Steam Edition. Can you pleae advise how I can access this Service Pack given that there is nothing to launch on my PMDG on-line account to which I am asked to log into to access the pack. Many thanks, ken

Hello guys, I have problem with my PDMG product, exatcly when I start free flight or mission the cocpit displays are not presemt the buttons and knobs do not work properly, aircraft accelerate itself without command. I folowed insalling instructions for FSX-Steam Edition Users. Does anybody have an idea to slve this problem. Thank you in advance. Best regards Neso 974

Hi there, I updated the latest airac cycle to 1703 from Navigraph. I paid for the Navigraph Ultimate for 12 months. I have the PMDG737NGX however I have downloaded the latest Airac cycle however the FMS is still showing Nav Data Out of Date: The FMS is showing Nav Data. Airac - 1108 July28AUG24/11. I have done everything to try and update this but its just not happening. I wanted to Fly from YSSY to YMML with this route: MARUB5 WOL H65 RAZZI Q29 ML DCT however Marub5 is not listed in the FMC. TESAT is not in the FMC. Could you please help me

Hey all, I'm having some trouble managing the descent on the NGX when I'm flying with ProATC/x. Basically I'm trying to put in the altitudes assigned by ATC and using the Alt Intv, but usually I'm not descending fast enough and get a VNAV disconnect and/or a Des Path Unachievable warning. Then, by the time I get to the ground I'm too far above the glideslope and usually have to overspeed (above 250 knots below 10,000 ft) to descend rapidly enough to catch the slope. Apparently I'm not descending fast enough at higher altitudes. How can I better manage my descents?

Hi All, I have been happily flying the NGX since December/January, and on the weekend encountered this problem for the first time. Departing EHAM to LSGG, was assigned the LOPIK1N SID off of Rwy 09. My route was already programmed in the FMC, so just added the SID once it was assigned by ATC. All goes well until just after rotating, when i want to raise the gear. The lever moves, but both red and green lights stay on, and checking outside the aircraft, the gear is staying down. Also see that my displays are intermittently freezing and working correctly. A/P engages, and actually flies the plane, but only for a short while then it disengages. Cycle the landing …

Hello guys, I need your help... On my 737-800 winglets KLM livery, I have a very low oil quantity on both engines (18-20%) no matter if I start it from cold and dark or with running engines. I tried to fix it using the maintenance menu (MENU > PMDG SETUP > AIRCRAFT > FAILURES > ALL SYSTEMS > MAINTENANCE) but nothing has changed, both engine are still with 18-20% oil (even after resetting FSX and removing and installing KLM livery from PMDG operation center) . I tried to google it and ran trough the manuals, but beside running the maintenance there is no other info how to resolve this issue. Any ideas? Thanks in advance!

Trying to download my purchased file but the download stops randomly for no reason. When I try all over again it stops again... Any ideas why that is please? Thanks

Hey all, Obviously I'm doing something wrong here. I've been practicing approaches without ProATC/x so that I can get into some VATSIM flying. In the past I've been spoiled by the ProATC copilot setting up the NAV radios for me. I was flying with just the FS2Crew copilot on SOP1 Today while flying the LEEHY4 STAR into KSLC I couldn't capture the localizer for runway 34L (here's a link to the approach plate for reference: https://flightaware.com/resources/airport/KSLC/IAP/ILS+OR+LOC+RWY+34L). I was on the descent profile and at 3000 AGL, had my course selector set to 343, and had my NAV1 Radio tuned to 111.90. I armed the VOR/LOC as I turned towards the final, but it …

I have not been active on FSX for a while so recently had it re-installed. When I tried to install PMDG 737 and 777 I got a message saying that I had exceeded the maximum extra activations Incident #827-4223115. I think I got a similar message for the PMDG 777 also. How can I install the planes. I wasn't aware there was a maximum number of times I could install these beautiful aircraft. Peter Evans

Hi guys, I just bought the PMDG Boeing 737 and I am very excited to start flying. After the installation I started FSX and choose the new airplane but this is what happens: https://gyazo.com/cf5d4609d93c6893d78e5ef5bcfb5497 And when I enter the game the plane looks like that... And on top of that the panel is all black and no buttons are working :( Any solutions? Please help.

Where, relative to the centre windscreen support, can I find the MCP panel ?

Hello Avsim Community, My sounds for the PMDG 737 are broken (no vid provided). Some interior noises eg: Flap motors, fire bell, AP disengage, etc can be heard outside the aircraft & some exterior noises are heard inside (can't remember). Also, I can only hear the interior & exterior "Motor" noises throughout the flight (when the engines are running too). I also can't hear the engine noises either, even at takeoff, cruise, landing, etc I cannot hear the engine noises AT ALL during flight. I have the SP1d service pack installed. By the way, I had to re-install the aircraft when installing SP1d (This issue was present before) I really hope anyone kn…

I'm running PMDG 737 NGX version 1.10.6461 on P3D v3.3.5.17625. When recently flying the DIRTY3 STAR into Atlanta, I noticed that the VOR course lines, with the chart specified courses, do not line up with the track lines between two VORs on the STAR. The course between the Spartanburg (SPA) VOR and Foothills (ODF) VOR is about 254 degrees Magnetic. When I entered 254 into the MCP course windows for each VOR, the two course lines are parallel but non-colinear. I had to change the MCP course windows to 260 to make them overly the track between the VORs. It may be coincidental, but the magnitude of the difference between the charted …

How to fly to an airport not included in the database? I want to fly to ZUNC, but it is not included in the database AIRCN 1702, so I want to know how to fly to this airport?