PMDG 737NGX | 737NGXu
19093 topics in this forum
-
Hi,Today I encoutered a (small) problem. Normally, I am NEVER having any CTDs at all. I've done tens of flights already. Maybe 2 or 3 of them were with a CTD, but that was all my own fault. Loading a livery over another one, using ENB Series, etc. But today, I encountered a very rare CTD, which was reproducable. Here's the story:I was doing a flight from EHRD to LOWI. online on IVAO. I did the normal startup procedures, programming the WOODY1B departure, and the ELMEM1A arrival. I got clearence, taxied to the runway, and took off without any problems. Once I was at T/D, I saved my flight (as I usually do, just in case something goes wrong). After T/D, I had to programm a …
-
- 0 replies
- 711 views
-
-
Hi,Can someone tell me how to have aircraft lights illuminating taxiways or runways in 2D cockpit. All is OK when in V Cockpit. When looking at the aircraft from the top-down (press F12), lights can be seen in a cone shape illuminating in front of the aircraft but cannot be seen going back to the 2D cockpit.I have looked in the FSX.cfg, Aircraft.cfg, panel, etc. Anyone knows? Or is it reserved to Virtual cockpit only?ThanksJean-Guy
-
Hey guys, i am going to get a completely new setup so can you tell me how to uninstall my ngx on the current system and install on the new system??!!Cheers
-
- 1 reply
- 702 views
-
-
Hi Captains,Today, is a special day for me and most probably for a huge part of the flight simmers who are lost in the news flow of the FS World. I've decided to create this FS channel in order to provide you the most interesting news about FSX addons wether they are payware, freeware , aircrafts , sceneries, utilities etc…. You may also save some time by getting all the hot news via my channel (that is the goal: save people some time)However, do not expect me to talk about crappy add ons or those not Bringing the feeling of being in a simulator. Do not expect me to talk about helicopter,awful and cheap sceneries what not. I know most of you guys from the Sim community d…
-
- 6 replies
- 2.5k views
-
-
Not sure what happened but I suspect AV but I have lost my engine sound. Any solutions short of a reinstall?Thanks,I can recover individual folders from a backup but not sure what folders?
-
- 1 reply
- 663 views
-
-
Please, I need help. I have FSBuild updated to the latest version and I can't load an IFR flight plan into PMDG 737NGX. Is there any flight planner out there that will do the job?Thanks,Tom Hibben
-
- 15 replies
- 9.1k views
-
-
Hi all,Ive read a couple of previous threads about autoland problems, but havent seen a soluion. Here's the problem. Am i missing anything?First, to be clear, heres how i autoland.Both fd's onSet both course controls as per fmc.Set both nav radios as per fmc.I'm just using the collins mcp.Acquire localiser, capture glidescope - no problems here.Turn on second ap with cmd button after glideslope capture.I always seem to get the 'single chanel' warning, and it doesnt go away. There's no land3, flare or rollout annunciation. So it seems to me that the ap is just running in single channel mode the whole way down.Have tried fail passive and fail active settings. Am only using …
-
- 9 replies
- 1.8k views
-
-
Getting steep angle when engaging AP with VNAV at about 1000 ft. causing aircraft to stale (all models), seemed to work OK with just SP1 installed, any ideasArming Vnav on ground, when engage TO/GA, Vnav goes off, then at about 1000 re engage and engage AP... then steep climb with stale...
-
- 33 replies
- 3.8k views
-
-
Hi,I'm gonna buy a new graphics card very shortly, probably within the next 1-2 weeks. It's gonna be a GTX 580 1.5 GB, no matter what. But I can't decide which one to buy. First of all, here in the Netherlands, quite a lot of them are out of stock already. At the moment the Gigabyte GV-N580UD-15i has caught my eye, and looks like a really good one. But also the EVGA GTX 580 DS Superclocked, and MSI GTX 580 Twin Frozr II (Lightning version out of stock), look really good. So is there really a difference between those cards? In the end it's all the same chip from NVIDIA, but still.Is anyone having Out Of Memory (OOM) issues with the GTX 580 1.5GB? Some advise would be reall…
-
- 25 replies
- 2.8k views
-
-
Hi,I am flying the NGX since day 1 and I now have a lot of FP saved(I am sure you do as well)On the FMC if I put Route-Origin-LOWW (for example) and I click on Co-route it always start at A (which is also normal).In the next SP could we please have the FP starting at the same place (LOWW, if we have FP from Vienna) or with the letter L,that would be a lot of help and also much faster.Thanks PMDG for a wonderful planeAlainV
-
- 4 replies
- 1.2k views
-
-
I have had the NGX for a week now and WOW what an airplane, from someone who started flying FS when I was 10 years old with FS2000 how far FS as gone amazing what you guys at PMDG have done with FSX.Anyway my question is with the short field performance package. With a light load lets say 60% capacity or so with fuel for a 200nm flight + reserve how much runway does the 737-700 need to takeoff with the SFP? Would 4,500ft be enough? Also given if that is enough I am guessing flaps 10 or 15 takeoff? Been looking through the documents and online and cant seem to find any info on this.Thanks for the help
-
- 20 replies
- 9.4k views
-
-
ohi guys, I just bought NGX from PMDG web site, it was running perfect. Next day I was trying to run, but the aircraft was in "cold and dark" and the 2d panel was crashed. Does anyone know any solution to solve my problem? Thanks
-
- 0 replies
- 632 views
-
-
Hoping for some help from you learned folks.. All my experience of a detailed simulation to date has been three years dedicated to the LDS 767. Old habits and all that.... I fly frequently under 'real' ATC control (either VATSIM or my online group) and because of this I often have to depart from full VNAV/LNAV control quite a way from the destination due to separation, weather, vectors etc. One thing I'm still getting my head around (and my eyes went funny searching for it in the FCOM) is the 'correct' way to operate the MCP in regards to speed. I've noticed that if you press either VNAV or LNAV when they are engaged their green light goes out (unlike in the 763). What m…
-
- 23 replies
- 3.7k views
-
-
Hi PMDG (and anyone else reading this),thanks for the stunning NGX, I really love all the never before seen/rare to see features like RNP support and fully implemented EGPWS respectively, just so interesting to learn about... Anyway, as the title says, do you plan to model the alternate gear extension system, I ask partly because it's relatively important, but also since a system similar in functionality has been beautifully modelled on the MD-11.Thanks,Charlie
-
- 9 replies
- 2.3k views
-
-
Hello,I'd like to buy a new PC for switching over from FS9 to FSx with PMDG NGX and many many good airport and mesh sceneries.What would you say to the following system???PC-Konfigurator - Intel So. 1155 (Core i3/i5/i7)CPU (Prozessor): Intel Core i7-2700K, 4x 3.50GHzCPU-Übertaktung: Übertaktung Stufe 2 - ExtremeMainboard: ASUS Sabertooth P67 B3, Intel P67Grafikkarte: AMD Radeon HD 6850 1024MBArbeitsspeicher: 8GB Corsair Vengeance DDR3-1600 (2x 4GB)SSD: 128GB Crucial m4, SATA32. SSD: 256GB Crucial m4, SATA3SSD fÜr Caching: NeinFestplatte: 500GB Festplatte, 7200rpm, SATA22 Festplatte: NeinLaufwerk: LG GH24NS70 24x DVD-Brenner2 Laufwerk: NeinNetzteil: 730W - BeQuiet! Pure Po…
-
- 26 replies
- 2.8k views
-
-
I like to fly the LOWI Approach, and I like to hold either at RTT or KTI, to have enough time to configure for next line of action. But I'm confused as to what would be the best speed for holding. Do I have to pay attention to the "best speed" which is usually around 224 +/-? It looks to me like the plane doesn't want to stick to the racetrack if I'm over 200. (190 at RTT). And I'm not talking about the entry, which I think it does pretty much well. Sometimes it starts turning a little too late after passing the vor, and when on the outbound track, it starts turning a little too early, and sometimes even ends up outside the inbound track (parallel). Someone please explain…
-
- 4 replies
- 1.1k views
-
-
I am having trouble accelerating past 200 knots after take off and for the autopilot to climb to the altitude I have set. I don't know what I am missing here. Autopilot is engaged, LNAV and VNAV are pressed. See screen below, this was taken on a short flight to test things out. I am probably doing something very dumb that is causing this.
-
- 2 replies
- 748 views
-
-
Ok, I've started a ticket with PMDG but wanted to ask you guys if you're experiencing any issues with the NGX when FSX is minimized to the desktop?I am having major issues recovering the flight with NGX loaded every time I minimize FSX to desktop OR get out of full screen and come back to it. I generally do it to engage Radar Contact and then come back into FSX to continue on with the flight. Well this have been frustrating because every time I get back into FSX, either some buttons don't work in the NGX panel or the FSX menu does not work or a right click menu does not work (it engages but the menus are blank).Let me get a few things out of the way first so I can get you…
-
- 6 replies
- 755 views
-
-
Hello,I am trying change the COCLOR.INI to make it look like in the picture but without success ...http://jetphotos.net/viewphoto.php?id=7187474&nseq=38 (include orange flood lights)can someone help me to do that ? :Praying:THANKS.
-
- 23 replies
- 3.9k views
-
-
Robert, while we all realise you are probably up to your neck with work as we approach Christmas, there has been a lot of speculation, some more than negative, regarding the release of the NGX SDK. As I'm sure you are aware, FS2Crew is an extremely sought after addon and of course is reliant on the release of the SDK. While it's understood there is a legal issue holding up it's release, it nevertheless has been more than a little time since this release was posted on the forum "According to Robert from PMDG, the SDK will be released next week sometime..." this was posted on the forum 24th November, following a previously posted release date of 8th November. Forgive me if …
-
- 57 replies
- 6.8k views
-
-
Hello,i try to add the F/O EFIS Control (PMDG_737NGX!EFIS_FO) in the Main 2D Panel, but the Gauge is not displayd correct.see attached fileThanksMatthias
-
- 3 replies
- 1.3k views
-
-
Hey to all,I might get this new PC with these specs; (tell me how the ngx will run with uk2000 EGBB scenery, because it is laggy and with poor frames with previous computer, i MUST know how it will run and is it worth the computer??)Motherboard: Asus P8Z68-V Pro LGA1155,DDR3,Sli/cFire,SATA3,GBLan,ATXRAM: Corsair XMS3 8Gb DDR3 1600 (2x4Gb) Memory KitCPU: Intel i7 2700K 3.5Ghz LGA1155 Unlocked Processor – RetailGPU: (still unsure of this, any recommendations very welcome :))PSU: Corsair TX Series 750W Modular ATX PSUHDD: 1TB Western Digital Caviar AV-Green 7200RPM 64Mb SATA2 Hard Drive + 2*500GB Samsung SpinPoint M7 SATA 5400rpm 8Mb 2.5In Hard DriveCPU Cooler: Arctic Coolin…
-
- 32 replies
- 3.1k views
-
-
Awesome livery from back in the day:
-
- 0 replies
- 646 views
-
-
Hi PMDG,I don't know if you can/want answer this question, but I am just curious to know how is the market responding to the 737NGX launch. How does it compare in terms of sales to the other "best sellers". Is it meeting your expectations ?Thanks again for making this lovely aircraft available...!Regards
-
- 5 replies
- 1.1k views
-
-
Just finished a new build specificaly to enhance performance while running the NGX. I have the OS (Win7-64) on a 64Gb SSD, FSX on a 128GB SSD and everything else on a 500GB HDD. FSX is running great. When trying to run the 800/900 installer I get this message: "fsx.exe version number not found. Unable to install". Then the installer closes. How can I get the installer to find fsx?Davei7 2600kAsus P8Z68 DeluxWin7 64
-
- 1 reply
- 1.3k views
-