PMDG 737NGX | 737NGXu

Anyone know if one exists for the PMDG NGX? Cheers.

Hello Does anyone know which software version (for example U18.8A) the PMDG FMC emulates ? I would look, however, currently I do not have my PMDG software installed as I am upgrading computers. Thank you, WilloW

Hi ! It has gone 2 weeks now and i still have not get respond from pmdg support about my activation of my product. Why are you not answereing?

I get a "Nav Data Out of Date" message on the FMC. I don't know why because I have the latest Airac data installed. which is 1804 Mar29Apr25/18 Frank Zych

I came in on final runway 27 at EHAM yesterday, everything normal on your everyday 1,5h hop, dropped the gear and started retracting flaps (in that order, I needed to shed quite some energy), verified that retardation was sufficient for me to gamble on a 500' stable call, got the runway in sight at about 1700' AGL and started to set up for manual flight. I have FD toggle bound to ctrl+F and ctrl+shift+F for the left and right hand side switches, making it easy to bump down to stick and rudder when needed. As I turned them off, I noticed I had been clumsy and possibly hit G while either holding down ctrl or shift (not both since that's TOGA, and not only G since the gear r…

Hello there. I have just rebuilt my PC with Windows 10 and P3Dv4.2. Have installed and activated my 737NGX and downloaded the latest version of OC. Each time I start OC, it tells me I have an update to P3D V4. I click install, but it dosnt seem to install as next time I open OC, the new message is there again. Thanks Chris

A couple of questions I'm having regarding tutorial 1. First, when entering the route our next leg after CLACTON begins at UL620. I could not find UL620 on any of the charts provided at the end of the tutorial (it looks like it's somewhere between the right edge of the CLACTON SID and the left edge of the SCHIPHOL Standard Instrument Arrival Chart). Would UL620 normally be displayed on a different chart - like an enroute chart? I'm one of these people who say "Where the heck did they pull THAT waypoint from?" :-) Second, I seem to be consistantly dropping out of LNAV while descending to SUGOL. From initial setup all the way there, the FMC is alerting me that…

In the FMC I set two key combinations to inc and dec bank angle selector in p3D v4. but when I press the keys it does not work, I.e. The bank selector does not work. anyone else had this issue ..

Dear PMDG, I purchased the 737 on 3/28/18 and received my email conformation but never received any download link. When I sign into my account and view my orders I see the purchase but no where on the receipt is there a download link of any kind. I have submitted 7 tickets over the past 10 days and still have no product. Could you please assist me with this problem.

Orbz had a real good sale on last month so i bought the payware Valdez .(real nice ) I'm a short hopper only so i've made maybe 15 flights from Whitehorse CYXY into PAVD and it's a real nice ride, but it would be a lot nicer if I'd get in there right, cause all my flights there are mess and sloppy. I have the latest airnav and using JON to transit. Has anyone have any tips to get in there like a real driver , cause it sure the heck ain't me

Hi against my better judgement i have paid again for the PMDG B737 this time in P3D V4. I have run the installer as admin and done a flight. All aspects seem ok except for the hud which drops down but nothing is displayed' I have seen a mention that this line below needs to be in the programmedata dll which it is but there is no hud. I have also pressed the Clr button on the hud control which someone suggested in another post. <Launch.Addon> <Name>PMDG_HUD_interface</Name> <Disabled>False</Disabled> <Path>PMDG\DLLs\PMDG_HUD_interface.dll</Path> <DllStartName>module_init</DllStartName> <DllStopNam…

I know how to create a distance ring for any waypoint using the FIX page on the CDU. I want to create a ring that extends 30nm from TOD. Is it possible to do it easily and directly, or do I have to create a waypoint that's close to TOD and then assign the ring to that waypoint? I tried "T/D" and "TOD" on LSK1 but those are invalid entries, as I thought they would be. I've searched on Google and this forum, but have not found an answer. Thanks!

So I was flying on VATSIM today, and I was on approach (about 10 nm out) to a runway. I was then told to sidestep to a parallel runway, which I accepted with no issues. However, on landing, I smacked into the ground. This was much to my surprise. I didn't hear any callouts and I normally rely on the 20 callout as my signal to flare. The only reason I can think of was that I did not update the FMC to reflect the change in runway. I was cleared for a visual so I didn't see a need to update the FMC. Do the callouts require the FMC to be programmed with the correct landing runway?

Hi All Just wondering if anyone could shed any light on the below for me. Having completed a flight and parked at the gate when it comes to shutting the engines down it just ignores anything I try to do. It ignores the cut off levers when clicked with the mouse, (They move but that's all) I have set up key commands in the setup menu on the FMC, but no joy I have also assigned those commands to external switches via FSUIPC5 (paid version) But whilst it moves the cut off levers on the screen, the engines still continue to run. Any thoughts/help would be greatly appreciated. Many Thanks Tom Signed Tom Wild…

I bought PMDG 737NG(Base package) few weeks ago. PMDG does not work consistently in my FSX steam edition - it sometimes work, and sometimes does not. When it does not work, the load out setting is almost identical to the default 737 in FSX, and all screens are black and buttons don't work. Strangely, even if I select 737-800 PMDG, there is a HUD on Captain's cockpit when PMDG is not working. I completely reinstalled and installed FSX steam edition and removed all remaining data from my hard drive two times(including PMDG), but PMDG is still unreliable. Is there some other measure? Or is there any other kind of repair tool from PMDG? …

I searched and searched and searched...nada. Does anyone have a TOPCAT profile for the 739?

HI all I recently did a short hop froom LOWW to LOWI, using the RNAv, and it worked perfectly (except that I forgot to flair / disconnect the AP in the end. rookie mistake) (do you btw have to disconnect the auto throttle yourself. because it doesn't retard like it does with ILS does it?) AH, well, onto the real question: I did a flight from eham to ehgg yesterday, and I established nicely ontp the rnav. VNAV and LNAV were on, the vertical purple line display on the PFD (that one you get when you press center 2 times) showed the decent path that was programmed. However, it didn't go down. DO you need to press APP? Or did I forget something else st…

I#ve purcased the 737 Base package and the PMDG 737 NGX Expansion Pack 600/700 for P3D by Aerosoft. After a new install of P3D v4 i installed both packages, but only the 737-800/900 is shown in the OC. In the version button both are shown as installed version 1.20.8465 and as uptodate. I#ve reinstall the -600 but no solution. Is there any help. Before reinstall my Backup from P3D v4 both versions worked. Thanks Joachim

OK, I'm just about finished coding the Alaska Airlines RNP/RNAV procedures for SE Alaska Airlines airports. This project will include the fields covered by FTX & FSAddons which are:PAGS - GustavusPASI - SitkaPAPG - PetersburgPAWG - WrangellPAKT - KetchikanThe files will include non-RNAV procedures as well, basically anything you would find in the FMCs. I've just about finished coding 4 of the fields and then they will be ready for Beta testing. My goal is to code all the ASA airports, they really do fly into some of the most challenging fields in North America and they are the pinoeers of RNP approaches. I've been having a blast designing these and can't wait for the …

Hello all, Recently my teenaged neighbor has gotten interested in airline flying and has been using FSX a bunch. Knowing that I fly for Alaska, he's asked me quite a few questions about the unique flying we do, and I've been showing him things on fsx. Suffice to say, I was utterly blown away when I first saw your NG simulator - I had no idea desktop simulation had progressed so far. Anyhow, he had installed the older RNP procedures someone created for Southeast a couple years ago, but Juneau wasn't included and many of the others have been updated. We set about seeing if we could figure out how to code the new procedures in the NGX box, and we're pretty happy w…

I have been struggling with this for a while now. I've done many searches here in the PMDG forums as well as out on the web, but haven't found a solution yet. I am trying to operate a flight on -900WL NGX variant (PMDG United N75410) but cannot load a ZFW above 136.x, when I should be able to go as high as ~149.2. I use PFPX for my flight planning and it shows I should be setting my ZFW at 143.1. Whenever I try to add that value, I get the "Invalid Entry" message on the CDU. My NGX "Weight Units" in P3Dv4 are set to LBS and PFPX is set the same. The CDU will not accept a ZFW above 136.x with any of my installed -900WL variants, but all the other (-600, -700, and -80…

Hello! HELP! I use Navagraph and I think a lot of others do to. I I'm confused as to why, I can't get the PMDG to show up in the Navagraph list of products. I see my ASN 16 and I see Aerosoft Airbus; but not PMDG. Why? Have I missed something? A few days ago, I purchased airport scenery KJFK, and it literally made a lot of things that were working, to not work anymore! I wound up having to uninstall everything including my FSX:SE! So, after re-installing FSX and my add-ons things were working as they should. My only problem now is, I can't for some reason see my PMDG listed in the FMS Manager in the list. Have I missed something? Or have i broken something?…

https://imgur.com/a/SRAjX AIRAC Cycle 1804 is current, yes?

When I cycle through the cockpit views hitting "A" P3D V4.2 crashes as soon as I reach the 2D panel. Any clue?

Hello everyone. A few days ago I have a serious problem with b737-800 NG of PMDG and PeD v4.22, which consists of the front wheel turning, but the plane does not follow the trajectory and can not make a turn. I have installed and installed again the PMDG product as P3D v4.22, but I can not solve the problem. I also have to say that this happens whether I assign the axes with the FSUIPC5 or directly from P3D v4.22. Please, do I have a suggestion or how can I solve this problem? Thanks for your attention